Top Dual Extrusion 3d Printing

BIQU H2 Extruder, V2.0 New Upgraded Dual Gear Extruder, Smooth Not Easy to Block 3D Printer Direct Extruder 1.75mm Filament for BIQU B1, Ender & CR Series Printers, CR-10S Pro

  • ...Gear: using bimetallic tube (copper alloy + GRADE5 titanium alloy), high temperature resistance, durability, high precision, and higher surface finish. The output gear modulus design was changed from 0.5 to 0.25, reducing the gear outer diameter, effectively solving the weak points of V1.0 gear jamming and unsmooth extrusion..
  • ✔️All-in-one Design & High Precision: The short-range extruder integrates the hot end of the nozzle, extruder, stepping motor, cooling fan, etc., double-gear extrusion, fast extrusion of consumables, short-range extrusion, short thread, and accuracy High, the control of the feeding amount is more accurate than remote extrusion, the withdrawal is more accurate, and the printing quality is better..
  • ✔️Extremely Smooth & Reducing Clogging: The smoothness of the throat and the inner wall of the nozzle reaches Ra0.4, which can effectively prevent clogging. H2 V2.0 adopts high-quality titanium-copper alloy hose, which has better heat dissipation and high temperature resistance, and the printing temperature can be as high as 400°C. It is the best quality hose material on the market. The hose is easy to disassemble, making it easier to use. convenient..
  • ✔️Lightweight & Compact & Powerful: BIQU H2 extruder weighs only 219 grams....
Check Stock

Redrex Dual Gear Extruder Metal Drive Feeder Upgrade Kit for Creality Ender 3 V2 Ender 3 Pro CR10 Series 3D Printer TPU Filament Supported

  • 【Double Gear Extrusion Mechanism】:The filament is gripped by the dual drive much more firmly with less deformation, so it doesn't jam as much in....
  • 【Upgraded Idler Gear Design】This idler gear is upgraded with two washers on both sides, so the sharp gear will NOT ride against the bottom of the....
  • 【Spring Adjustable Extruder】The extrusion spring tension could be adjusted by tighten the screw,which greatly improves the printing accuracy and....
  • 【Application】:This all metal dual drive extruder is compatible with Ender 3 V2,Ender 3 Pro,Ender 3,Ender 5 Pro,CR10 S series 3D printer..
  • 【Kindly Reminder】:Please calibrate the E-steps from 100 to 139..
Check Stock

Ultimaker S5 3D Printer

  • Newest large-format 3D printer from Ultimaker.
  • Dual extrusion capability for multi material prints.
  • Premium materials used in construction. Heated bed smooths prints and allows for ABS printing..
  • The innovative Print Core system allows for simple swapping of hot ends.
  • Water soluble supports allow for smooth surfaces and complex geometry.
Check Stock

R QIDI TECHNOLOGY X-CF Pro 3D Printers Industrial Grade,Specially Developed for Printing Carbon Fiber&Nylon with QIDI Fast Slicer, Automatic Leveling,Large Build Volume 11.8x9.8x11.8 Inch

  • 【Design Concept】X-CF PRO is a 3d printer specially designed for printing carbon fiber and nylon filaments.Independent research and development of the latest generation single extruder system, which uses high-temperature alloy material, dual-gear extrusion, can solve the problem of the accuracy is not very accurate or service life is not long when printing carbon fiber. Another set of normal high-speed extruder can easily print PLA, ABS, PETG and other filaments..
  • 【Precision Manufacturing Process】QIDI TECH using industrial-grade manufacturing, dual z-axis and industrial guide, can achieve high precision, fast printing. Upgrading the XYZ structure, all use of industrial slides. PEI printing plate, solve printing models warp and other problems.The 3d printer’s structure is developed for the effective and accurate printing of carbon fiber.Meanwile, printing other common filaments, the speed can be increased to 120cc per hour..
  • 【New technology upgrade】 A new automatic intelligent leveling mode, taking points up to 20 points to calculate the travel prime. With the new upgraded software, it is more intelligent, especially provide more effective and accurate parameters for printing carbon fiber and nylon filaments, which can be used right out of ....
Check Stock

Micro Swiss Direct Drive Extruder for Creality Ender 5

  • 【Official New Product from Creality】Sprite Extruder Pro Upgrade Kit enables all Ender 3 series 3D printers to have direct extrusion and high temperature printing conditions..
  • 【Better new design】Simulation of flow field mechanics and dual fan design results in powerful heat dissipation function and more stable model formation..
  • 【Double gear feeding, stable and reliable】The double tooth structure does not damage the consumables, and the feeding is more reliable and stable. Reduces the chance of clogged nozzles when retracting consumables and failures when loading new consumables. Full metal hot end kit with heating block, titanium throat and cooling block, allowing you to print high temperature materials up to 300°C..
  • 【Easy to install, more adaptable】Adaptable, Ender 3/Ender 3 V2/Ender 3 Pro/Ender 3 S1/Ender 3 Max/CR-10 Smart Pro 3D Printers, easy to install and use. It does not affect the inherent nature of the printer function as it is a complete extrusion kit. Comes with a long extruder motor connection cable, tools, accessories and wiring diagram instructions for installation and easy assembly..
Check Stock

Gizmo Dorks 3D Printer Filament 3mm (2.85mm) 200g, 4 Color Sample Pack - Flexible Red, Polycarbonate Blue, Nylon Clear, PETG Green

  • Bundle contains 4 sample spools each containing 200 grams of different 2.85mm diameter 3D printer filament: Flexible TPU Red, Polycarbonate Blue, Nylon Clear, and PETG Green.
  • Flexible TPU red filament has a shore hardness of 95A and can be used to print different flexible parts such as cellphone cases.
  • Polycarbonate blue 3D filament is extremely hard and durable as polycarbonate is used in many applications such as bullet proof glass.
  • Nylon 3D printing filament is a great engineering filament that has great wear resistance that can make specialty printed parts.
  • PETG filament combines all the benefits of PLA with ABS producing printed parts that are both strong and flexible.
Check Stock

Creality Sprite Direct Drive Extruder Dual Gear Feeding Design 3.5:1 Gear Ratio Bowden Extrusion for CREALITY Ender-3 S1 3D Printer

  • [Exquisite Shape & Precise Structure]: 54x50x64.3mm small size,266g weight.Exquisite design,perfect combination of extruder and printing hotend make more powerful functions..
  • [80N Large Torque Design]: The use of gear with 3.5:1 gear ratio which perfectly matches with motor makes extrusion force up to 80N(depending on filaments). More precise control of feeding withdrawal..
  • [Dual Gear Feeding]: The double-toothed structure does not damage filaments, feeding is more reliable and stable..
  • [Customized Dual Fan]: Simulation of flow field mechanics and dual fan design results in powerful heat dissipation function and more stable model formation..
  • [Easy to Operate,More Convenient for Pumping and Refueling]: The use of labor-saving wrench design makes it more convenient and faster to insert filament. It can be applied to direct and bowden flament feeding to meet printing needs of users at direct and bowden extrusion.The extrusion is stable, and printing effect of TPU and other flexible filaments is better..
Check Stock

CREALITY Ender 3 S1 3D Printer (Upgraded Ender 3 V2) with Sprite Dual-Gear Direct Drive Extruder CR Touch Auto Bed Leveling Silent Board Filament Sensor Dual Z-axis High Precision 8.6x8.6x10.6inch

  • Sprite Direct Dual-Gear Extruder: The "Sprite" direct dual gear extruder developed by Creality 3D has two chrome steel gears that are switched with a gear ratio of 1: 3.5. With a force of up to 80N, the extruder achieves a smooth and even feed and extrusion of filaments without slipping and is ideal for printing flexible filaments such as TPU. With a weight of only 210g, the "Sprite" is lighter than other direct extruders and is characterised by lower inertia and more precise positioning..
  • CR Touch Auto Bed Levelling: The CRTouch 16-point auto levelling technology saves you from the effort of manual levelling. The intelligent levelling system automatically compensates for the print height of various points on the heated bed..
  • Removable PC Spring Steel Platform: The innovative printing platform is a combination of a PC coating, a spring steel plate and a magnetic plate that immediately adheres to the surface when it is detached. The PC coating ensures good adhesion and easy removal of the printed models by bending the surface..
  • Ultra-Quiet 32 Bit Motherboard：The brand new 32-bit silent board runs at low....
Check Stock

Official Creality Ender 3 S1 Pro 3D Printer with 300°C High-Temperature Nozzles,Sprite Metal Direct Extruder,Removable PEI Spring Platform,CR Touch Auto Leveling,LED Light,Print Size 8.6×8.6×10.6in

  • ...even printing with different filaments, which is time-saving with enhanced efficiency..
  • 【"Sprite" Full-Metal Dual-Gear Direct Extruder】: Ender 3 S1 Pro uses the self-developed “Sprite” full Metal Dual-gear Direct Extruder. Same as its name, “Sprite”, it is small but powerful - weighing only 334g, but the extrusion force can be up to 80N. It enables smooth feeding when printing with diverse filaments, including those flexible materials, providing users with a stable and reliable printing journey..
  • 【CR Touch Auto Leveling & 4.3-inch Color Touch Screen】: Equipped with CR Touch, the 16-points automatic leveling ensures perfect leveling by measuring the distance between the nozzle and the heat bed and accurately completes compensation. The 4.3-inch color touch screen enables click-to-control. It supports the switch among nine languages, making the printer more manageable for people from various regions worldwide. Therefore, Ender 3 S1 Pro is friendly, especially for 3D printing beginners..
  • 【Removable Spring Steel PEI Build Plate】: The build surface of Ender 3 S1 Pro is covered by a PEI spring steel build plate, which is durable. It not only has good adhesion to the printed models but is also bendable, enabling a slight flex to remove the ....
Check Stock

Haldis 3D Extruder DDB Universal Nano Gear Dual Drive 3D Printer Extruder for Ender 3 Pro Ender 5 Pro CR10S Pro Mega S Prusa I3 Other DIY 3D Printer Kits DLC Right

  • 1.【Transparent Design】: Transparent and cool design, double gear extruder, when working, you can watch the printing filament go through to see how....
  • 2.【Dual Gear Extrusion】: Two stainless steel wheels grab the filament from both sides, high extrusion force, ensure smooth feeding and provide....
  • 3.【Adjustable Pressure Spring】: Easily adjust the clamping force of the filament, improved adjustment thumb screw, more comfortable adjustment and....
  • 4.【High Quality Material】: Transparent hard plastic shell and high quality metal extrusion wheel parts, the transparent material looks very....
  • 5.【WIDE COMPATIBILITY】: Compatible with most DIY 3D printers, such as Creality CR10, MK8 V6 CR10 Ender 3 series, Wanhao D9, Anet A8 E10, Geeetech....
Check Stock

Artillery Sidewinder X2 3D Printer, SW-X2 FDM 3D Printers Newest Model Auto Leveling, 32-Bit Silent Motherboard 95% Pre-Assembled Resume Printing Function Build Volume 300x300x400mm

  • [Direct Drive Extruder] The advanced Titan extruder solves most of the problems of filament clogging and uneven extrusion, and achieves high-precision printing. And the maximum printing speed of 150 mm/s realizes high-efficiency printing..
  • [Dual Z-Axis Synchronization System] Dual Z-axis design, double screw drive, makes sure the X-Axis always move parallel to the lattice glass build platform and improves the printing quality..
  • [Automatic Leveling] The Artillery Sidewinder sw-x2 3d printer adopts an intelligent auto bed leveling design, it can automatically adjust the hot bed before printing. And the hot bed can be heated to 110°C within 2 minutes..
  • [Resume Printing Function] The Sidewinder x2 has the function of detecting the exhaustion of filament or power failure, and continuing to print from the position where printing stopped last time after recovery..
  • [Ultra-Silent Printing] 32-bit silent motherboard and exclusive ultra-quiet stepper driver effectively reduce working noise and achieve low-decibel printing mode. Even when the machine works during night, it will not affec....
Check Stock

taulman3D Nylon Filament PCTPE CoPolymer 1.75mm 3D Printer Consumable Flexible Polyamide PA 1lb Spool Fits Nearly All FDM 3D Printers Black

  • 1.75mm Flexible Nylon Filament for Desktop 3D Printing. Use PCTPE For 3D Printing Projects That Require High Strength and Flexibility. Extrusion....
  • Made in America Filament for 3D Printers. This Ensures That Quality and Consistency is Maintained Throughout the Entire Supply Chain So You Know the....
  • 1lb worth of PCTPE 3D Printing Material..
  • High Strength 3D Printing with Nylon Filament. Perfect for Aerospace, Automotive, Health Care, Agricultural and Serious Engineering Projects.
  • PCTPE is Trusted Worldwide For Reliability, Flexibility and Strength. By Using PCTPE You Know That You're Using a Filament for 3D Printing That....
Check Stock