Top Dual Flute Step Drill Bit

FTG USA Countersink Drill Bit Set 6 Pc #10 (3/16') Wood Countersink Drill Bit Pro Pack Countersink Set, Tapered Countersink Bit, 1 Stop Collar, Hex Wrench, Woodworking Countersink Drill Bits

  • Countersink drill bit set for wood with tapered drill bit , 4 Flute countersink cutter #45 Carbon Steel, tapered countersink set features 6 Piece Pro drill set Same Size drill bits with countersink #10 (3/16") Adjustable wood countersink, 1 Depth Stop Collar 3/8", 1 Hex Wrench (1/8" Allen Key). Counter-bore, and wood plugs size 3/8 inch. Hex shank compatible with 1/4" standard Quick Change chuck including impact drills. FTG 2350P counter sinker drill bit for wood.
  • Wood drill bit set with counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood.
  • Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits desi....
Check Stock

ZELCAN Large HSS Spiral Groove Step Drill Bit 12 Sizes Titanium High Speed Steel 1/4 to 2-3/8 Drill Bit for Sheet Aluminium Metal Wood Hole Drilling Big Multiple Hole Stepped Up Bit for DIY Lovers

  • Durable Titanium Coated Bits ----- The step drill bit is made from upgraded high speed steel characterized by well-balanced toughness, wear resistance and red hardness properties for better and faster hole -drilling performance. The titanium coating makes the drill bit more durable so that it can last for years with uncompromised quality..
  • Jam-Free Performance ----- The dual-flute design prevents metal fillings from flying around and clears chips faster thus it can drill more smoothly without heating up..
  • Larger Size ----- Our drill bit is bigger in size so it can drill holes with larger dimensions up to 2-3/8"..
  • Universal Compatibility ----- The rapid strike tip drills twice as fast as the average step drills and can drill acrylic, PVC, wood, aluminum and iron sheets up to 0.2’’ in thickness..
  • One Bit for All ----- The bit comes with 12 hole sizes: 6mm, 10mm, 15mm, 20mm, 25mm, 30mm, 35mm, 40mm, 45mm, 50mm, 55mm, 60mm. , saving you time and efforts to change bits, quadrupling your drilling efficiency compared to competition..
Check Stock

NEIKO 10169A Step Drill Bit Set and Automatic Center Punch | 5 Piece, 41 SAE Sizes Total, 1/8” – 1-3/8” | Titanium High Speed Steel Unibit, Stepper Cone Drill Bit | Two Flute Step Down Bits

  • HSS COBALT STEP BIT: Classic stepdrill bit constructed of high-speed steel with titanium coating for drilling holes in plastic, aluminum, copper, stainless steel, and many other types of sheet metal. Also doubles as a hole expander..
  • TWO FLUTE & TRI SHANK: Two-flute design deburrs during drilling, clearing chips faster and allowing particles to escape for clean cut holes. Each step drill bit features a tri-flatted shank for a secure fit into power tool chucks, eliminating slip..
  • SPRING LOADED CENTER PUNCH: Our 5-inch automatic spring punch tool is a great tool for working with materials like wood, plastic, metal, and leather. Centering tool is spring loaded with an adjustable cap that accommodates any project..
  • INCLUDES: Four multipurpose dill bit in 1/4-inch shank and 3/8-inch shank with automotive center punch and a red blow mold carrying case for easy convince and storage..
  • MULTIPLE HOLE DRILL BIT: 4 stepper bits included. 1 x 6 step bit (1/4” shank.
  • 3/16” - 1/2”), 1 x 13 step bit (1/4” shank.
  • 1/8” – 1/2"), 1 x 10 step bit (3/8” shank.
  • 1/4” – 1-3/8”), and 1 x 12 step bit (3/8” shank.
Check Stock

NEIKO 10180A Steel Spiral Quick-Change Step Drill Bit for Metal with 4-Flute Spiral Grooved Design, Nitride-Coated High-Speed Steel Multitool with 12 Sizes in 1 Step Bit, Unibit, Hole Drill Bit

  • HIGH-QUALITY DRILL BIT: Our individual NEIKO 10180A step drill bit is made with #4241 high-speed steel and has a titanium nitride coating for extra durability. The 4-flute spiral grooved design makes this a fast and long-lasting metal cutting tool..
  • QUICK-CHANGE DRILL BIT: With a 1/4-inch quick-change hex shank, this step drill bit fits securely in most pistol drills or drill presses. Use this cone-shaped, versatile, and small drill bit for metal projects at work or home..
  • DRILL BIT FOR HARDENED STEEL: This stepper drill bit for metal is perfect to create the exact hole size you need. The fluted spiral drill-bit design automatically deburrs and expands holes for a cleaner drilling process every time without heating up..
  • MULTISIZE DRILL BIT: This metal step drill bit can drill holes in 12 different sizes to meet any job requirements. Our 12-step drill bit for metal drills holes in 1/16-inch increments ranging from 3/16″ to 7/8″ to create the perfect-sized holes..
  • HEAVY-DUTY DRILL BITS: Our drill bits are created to work with any project, large or small. Our multifunction drill bits are designed with you in mind, so you can get your work done with confidence and speed using our quality tools!.
Check Stock

CORTOOL 2-Inch HSS Spiral Groove Step Drill Bit, 10 Sizes Cobalt Added High Speed Steel 1/4" to 2" Drill Bit for Sheet Aluminium Metal Wood, Big Multiple Hole Stepped Up Bit for DIY Lovers

  • The step drill bit is made from upgraded high speed steel characterized by well-balanced toughness, wear resistance and red hardness properties for better and faster hole -drilling performance. The cobalt coating makes the drill bit more durable so that it can last for years with uncompromised quality..
  • The spiral dual-flute design prevents metal fillings from flying around and clears chips faster thus it can drill more smoothly without heating up..
  • The rapid strike tip drills twice as fast as the average step drills and can drill acrylic, PVC, wood, aluminum and iron sheets up to 0.2’’ in thickness..
  • CORTOOL drill bit is bigger in size so it can drill holes with larger dimensions..
Check Stock

Rocaris 39 Pack Woodworking Chamfer Drilling Tools, Including Countersink Drill Bits, L-Wrench, Wood Plug Cutter, Step Drill Bit, Center Punch, Drill Stop Bit Collar Set, Twist Drill Bit Tool

  • ...od Plug Cutter, Step Drill Bit, Center Punch, Drill Stop Bit Collar Set, Twist Drill Bit Tool. Pecfect gift for fathers, friends, carpenter and DIY lovers..
  • 7Pcs Countersink Bit for Wood – Made of high carbon steel with high hardness & abrasive resistance, large chip flute and five edge chamfers can drain saw dust faster and easier(Size - 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 10mm). With 1pc hex L-wrench, you could easily remove and adjust counter sleeve depth and drill depth..
  • 8Pcs 3/8" Shank Wood Plug Cutter Drill Bit Set – Made of durable carbon steel, it is used for tapered 1/4", 3/8", 1/2", 5/8" corks to cover recessed screw holes or hide imperfection. Can cut the plug 22mm/23mm/25mm/26mm in depth as well..
  • 3 Pcs 1/4" Hex Shank HSS Step Drill Bit Set – Great heat/ corrosion/ rust resistance with titanium coating. Specification: 4-12mm / 4-20mm / 4-32mm. Suitable for drilling holes in Iron Plate, Copper Plate, Aluminum Plate, Wood, PVC sheet, Insulation Boards. Not recommend for hard and brittle materials such as glass, tile floor, wall etc..
Check Stock

Matework M35 Cobalt Step Drill Bit Four Spiral Flute Step Bit 1/4 -1-3/8 Wear-Resistant TiAlN Coated 3/8 Hex Shank Unibit for Metal Wood Stainless Steel Plastic 19 Size

  • FOUR FLUTE STEP DRILL BIT - Ordinary step drills are prone to deflection during cutting, but four Flute step drill are more stable in cutting. The service life is twice as long as that of ordinary step drills, the drilling accuracy is significantly improved, and the cutting speed is faster when drilling, which has a unique effect on stainless steel drilling..
  • M35 COBALT HSS - M35 cobalt HSS can obtain high hardness (HRC 64-66), high red hardness and high wear resistance through proper heat treatment. Its toughness and bending strength are higher than ordinary high-speed steel, and it is better for hard materials..
  • TiAlN COATING - As a new coating material in the past two years, TiAlN coating has excellent characteristics such as high hardness, high oxidation temperature, good thermal hardness, strong adhesion, small friction coefficient, and low thermal conductivity..
  • 135°CUTTING ANGLE - The increased angle of the drill tip is more suitable for drilling hard materials than 118°. The larger the included angle, the smaller the self-wear and the larger the stress area..
  • TIPS - Due to high-speed rotation, the temperature of the drill bit will continue to rise. It is recommended to add cutting oil or spray water to cool down when working continuously, which....
Check Stock

Cobalt Drill Bit Set - 13 Piece M35 Cobalt Drill Bits with Storage Case - Perfect Drill Bits for Metal, Hardened & Stainless Steel, Cast Iron, and More!

  • REPLACES 28 DRILL BITS: This set includes three standard SAE step drill bits that replace 28 individual drill bits.
  • TITANIUM COATED STRENGTH: Made of high speed steel with titanium coating for added durability and bit life.
  • SMOOTH DRILLING ACTION: Two-flute design provides faster, smoother cutting without walking and a tri-flat shank ensure a firm grip.
  • A COMPLETE SAE SET: Comes with one 3/16-inch to 1/2-inch six-step bit, 1/4-inch to 3/4-inch nine-step bit, and 1/8-inch to 1/2-inch 13-step bit.
  • CUTS AND DEBURRS: Cuts through steel, sheet metal and other surfaces with only a small amount of pressure and deburrs as you drill.
Check Stock

Matework M35 Cobalt Step Drill Bit Set Four Spiral Flute Step Bit 1/8 -7/8 Wear-Resistant TiAlN Coated 1/4 Hex Shank Unibit for Metal Wood Stainless Steel Plastic 3Pcs 20 Size

  • FOUR FLUTE STEP DRILL BIT - Ordinary step drills are prone to deflection during cutting, but four Flute step drill are more stable in cutting. The service life is twice as long as that of ordinary step drills, the drilling accuracy is significantly improved, and the cutting speed is faster when drilling, which has a unique effect on stainless steel drilling..
  • M35 COBALT HSS - M35 cobalt HSS can obtain high hardness (HRC 64-66), high red hardness and high wear resistance through proper heat treatment. Its toughness and bending strength are higher than ordinary high-speed steel, and it is better for hard materials..
  • TiAlN COATING - As a new coating material in the past two years, TiAlN coating has excellent characteristics such as high hardness, high oxidation temperature, good thermal hardness, strong adhesion, small friction coefficient, and low thermal conductivity..
  • 135°CUTTING ANGLE - The increased angle of the drill tip is more suitable for drilling hard materials than 118°. The larger the included angle, the smaller the self-wear and the larger the stress area..
  • TIPS - Due to high-speed rotation, the temperature of the drill bit will continue to rise. It is recommended to add cutting oil or spray water to cool down when working continuously, which....
Check Stock

NEIKO 10181A Step Drill Bit Set 3 Piece Spiral Grooved for Faster Drilling Step Bits for Stainless Steel Metal Wood Plastic Unibit Cone Drill Bits with 31 Step Sizes Total

  • PREMIUM STEP BIT: Each unibit is constructed of industrial high-speed steel with a titanium nitride coating for durability and strength to punch and drill clean holes in materials like plastic, aluminum, wood, copper, stainless steel, and other types of sheet metal..
  • STEP DRILL BIT FOR METAL: With a split point tip that accelerates cutting speed while preventing angled walking away from center line of bore, drilling holes in metal is fast, efficient, and clean..
  • SPIRAL DESIGN: The two-flute spiral grooved design deburrs chip, dust and debris for clearance and smooth cutting. With 31 step sizes, each hole made with these step bits will be precise..
  • QUICK-CHANGE: The 1/4-inch hex shank makes for easy, convenient, and quick stepper bit switches and is compatible with impact ready power tools..
  • INCLUDES: Each bit set comes with 3 drill bits of a combined 31 sizes to add to your drilling arsenal: 13 step drill (1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2-inch) 6 step drill (3/16, 1/4, 5/16, 3/8, 7/16, 1/2-inch) and 12 step drill (3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8-inch)..
Check Stock

28 Pack Woodworking Chamfer Drilling Tools with a Case Rocaris Including 6 Countersink Drill Bits Set 5 Metric Step Drill Bit 7 Counter Sinker Drill Bit Set with L-Wrench 8 Wood Plug Cutter.

  • ...Step Drill Bits: 3/16-1/2'', 1/8-1/2'', 1/4-3/4'', 3/16-7/8'', 1/4-1-3/8'', suitable for sheet metal, wood board, plastic, aluminum alloy, copper, NOT recommended for high carbon steel, hard metal..
  • 7 Pack Countersink Bit for Wood – Made of high carbon steel with high hardness & abrasive resistance, large chip flute and five edge chamfers can drain saw dust faster and easier(Size - 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 10mm). With 1pc hex L-wrench, you could easily remove and adjust counter sleeve depth and drill depth..
  • 8 Pack 3/8" Shank Wood Plug Cutter Drill Bit Set – Made of durable carbon steel, it is used for tapered 1/4", 3/8", 1/2", 5/8" corks to cover recessed screw holes or hide imperfection. Can cut the plug 22mm/23mm/25mm/26mm in depth as well..
  • 6 Pack 1/4" Hex Shank 5 Flute Countersink Drill Bit – Made of high speed steel, they are pectect for sinking 90° hole in Wood and PVC board for ountersunk screw. Diameter- 6mm(1/4"), 8mm(5/16"), 9mm(3/8"), 12mm(1/2"), 16mm(5/8"), 19mm(3/4")..
Check Stock

FEWELL HSS Step Drill Bit Set 3-Piece Set 29 Sizes M35 Cobalt Spiral Groove Titanium Coated Step Drill Bit for Drilling Plate Aluminum Metal Wood HoleSpecification

  • 【M35 Cobalt High Speed ​​Steel】The durable step drill is made of HSS M35 cobalt, and the surface is plated with cobalt，outstanding durability and sharpness. Effectively reduces the friction to ensure cooler running so as to prolongs service life..
  • 【HSS titanium coating】The surface is treated with a titanium alloy, which greatly improves the cutting performance of the drill bit, is more wear-resistant, and extends the service life..
  • 【Efficient Design】118°X split point tip and two-flute design increases cutting speed with self-centering and prevents walking, clears chips faster and allows particles to escape easily..
  • 【Total 29 Step Sizes】3 drill bits, 29 sizes, our drill bit set includes 3 standard step drill bits, capable of drilling 29 holes of different diameters, thus saving your time and effort..
  • 【Application】The drill step bit suitable for pistol drill or bench drill, cooling water to extend its service life. The appropriate drilling speed is 250-400 rpm. Compared with traditional drills, the impact is minimal and it is almost impossible to break..
Check Stock