Top Dual Z axis

HICTOP Voxelab Aquila Dual Z-axis Upgrade Kit with Lead Screw and Stepper Motor for Voxelab Aquila 3D Printer (for Voxelab Aquila)

  • 1 Voxelab Aquila Dual Z-axis Upgrade Kit, to make the structure more stable and the printing of higher accuracy.
  • 2 Length of the Rod Lead Screw for the Voxelab Aquila dual z upgrade kit : 365mm/ 14.4 inch..
  • 3 All the parts you need to upgrade Voxelab Aquila to dual Z rods are included in the box..
  • 4 Compatible with Voxelab Aquila 3D printer.
  • 5 It also can be used on other same size similar printers.
Check Stock

ANNOYTOOLS ARM 32-bit 3-Axis CNC Controller,GRBL 1.1F USB Port CNC Engraving Machine Control Board with Fan Cooling DRV8825 Standalone Driver,Support 500W Spindle/NEMA17/23 Stepper Motor/Laser Module

  • Model:3 Axis GRBL 1.1F USB Port GRBL Control Board.
  • Input voltage: 12-24VDC .CNC Router Machine Controller board.
  • Compatibility: support 12V/24V laser, TTL/PWM modulation signal, 3P interface and 2P+2P interface.
  • support 775 motor, 200W/300W/500W spindle.
  • support dual Y-axis use, three-axis and two-axis switching use.
  • support X/Y/Z limit switch, Z-axis probe, emergency stop switch.
  • Support stepper motor: 12V, within 2A maximum current, within 1.5A recommended. (Stepper motor 42, 57).⚠️Please check the wire sequence when connecting the stepper motor, the wire sequence may be different for different motors, wrong connection may burn the motor and the motherboard..
  • Support software：LaserGRBL/Lightburn/Candle(3 axis)/Universal Gcode Sender.
  • Tip: Before you connect the motherboard, please carefully check the need to connect the device wire sequence (laser, motor) to prevent a mismatch of wire sequence, burn the device. Customer service 24H online, to provide you with help..
Check Stock

ANYCUBIC Chiron 3D Printer Semi-auto Leveling Large FDM Printer with Ultrabase Heatbed Suitable for 1.75 mm Filament TPU Hips PLA ABS etc / 15.75 x 15.75 x 17.72 inch 400x400x450mm

  • Large Build Volume, ANYCUBIC Chiron 3D Printer comes with one of the largest build volume of 15.75 x 15.75 x 17.72 inches, you can print models that....
  • Semi Auto Leveling and Resume Print, Equipped with an auto leveling module which automatically detects 25 points, supports real time adjustment....
  • Easy to Assemble and Use, Full metal body, stable and durable, modular design and only take 5-10 minutes to assemble, TFT Touch Screen with brand new....
  • Printing Precise and Safe, Equipped with Y Axis Dual Sideway and Z axis dual screw rod design, the height on both sides of the Z axis will be....
  • More Function, Ultrabase Pro, Coated with a special composite coating make the printed large model not easy to warp and easy to demold, All ANYCUBIC....
Check Stock

Genmitsu 3020-PRO MAX CNC Router Machine for Metal Carving and more, GRBL Offline Controller, with Limit Switches & Emergency-Stop, XYZ Effective Working Area 300 x 200 x 72mm (11.8 x 7.9 x 2.8inch)

  • Bigger and better with an all new extra rigid and beefy design featuring an increased Z Height of 72mm dual steel X axis guide rails, all aluminum spindle holder and 300W spindle. All these upgrades make metal carving easier, ideal for an endless variety of drilling, and carving operations on various metals, like brass, copper and 6061 aluminum, etc..
  • Upgraded linear guide structure and 4040 Y axis profiles highly improve the engraving accuracy and processing strength, eliminating Z axis wobble issues that most other desktop CNC machines have..
  • One-piece machined and molded aluminum design ensures flatness and strength of the work platform. Integrated measurement scale is convenient for material positioning. The platform is compatible with most of the CNC clamps on the market..
  • Everything you need out of the box. The Genmitsu 3020-PRO MAX router already includes all of the accessories and components you need at an affordable price, including offline controller, XYZ axis limit switches, emergency stop switches, Z-probe and more..
  • The pre-assembled module of XZ Axis Gantry and Base A....
Check Stock

Creality CR-30 3D Printer with Infinite Z-Axis Printing Creality 3DPrintMill CoreXY 3D Printer with Silent Board Filament Sensor and Dual Gear Metal Extruder

  • INFINITE Z-AXIS FOR ENDLESS PRINTING - Equipped with the rolling conveyor belt, the Creality CR30 enables you to print “infinitely” on the Z axis....
  • ROLLING CONVEYOR BELT - The wear-resistant conveyor belt on the CR30 features excellent layer adhesion. In addition, prints will fall off....
  • STABLE CORE-XY STRUCTURE - The stable and sturdy Core-XY precision structure with isosceles right triangle support gives you an extraordinary printing....
  • DUAL-GEAR METAL EXTRUDER - High-quality dual-gear metal extruder, provides better grip and filament pushing force, allows for large filament spools,....
  • EXCLUSIVE PRINTING SOFTWARE - This Creality 3d printer has its own printing software, Creality Belt, which is specially formulated for unlimited 3D....
Check Stock

ELEGOO Neptune 3 Pro FDM 3D Printer with Auto Bed Leveling, Dual-Gear Direct Extruder, Dual Lead Screw Drive, Removable Capacitive Screen, 225 x 225 x 280 mm³ Large Printing Size

  • ...ne 3 Pro are driven by silent stepper motors for quieter and more precise movement during printing, which reduces the noise as low as 47-48dB. The easy-to-setup printer comes with the main components pre-assembled, as well as a complete tool kit for quick installation..
  • 【Dual-Gear Direct Extruder】The new dual-gear direct drive extruder is made of SUS303 high-quality stainless steel with a 3:1 reduction ratio and stronger extrusion force for smoother filament feeding and more stable & accurate printing, which greatly reduces nozzle clogging and under-extrusion issues, printing effect is better than Bowden extruder. Compatible with multiple filaments such as PLA, TPU, PETG, and ABS..
  • 【Nozzle Kit for Better Printing Effect】The nozzle kit contains a TC4 titanium alloy throat pipe, an aluminum alloy flat heat sink structure, and a brass nozzle.The widened aluminum heat sink paired with the front close-fitting efficient cooling fan for a better heat dissipation effect and lower the temperature of the throat pipe, thereby reducing the possibility of nozzle clogging..
  • 【Smarter Printing Experience】Auto mesh bed level....
Check Stock

Creality CR-10S 3D Printer FDM Upgraded Metal Extruding Unit Dual Cooling Fan Silent Motherboard Meanwell Power Supply 300x300x400mm (Orange)

  • ❤ Big Printing Size ❤ Print and show your creation up to 300x300x400 mm (11.8″ x 11.8″ x 15.8″), with a single print or split and join it in as many parts as you like..
  • ❤ Resume Printing ❤ Resume printing let your prints can be resumed from the last layer if power off or lost, saving time and reducing filament waste..
  • ❤ Upgraded Dual Z Axis ❤ Feeling in control with its upgraded dual Z Axis Leading Screws.
  • high positioning accuracy, move smoothly and print faster..
  • ❤ Suit for Everyone ❤ Affordable for both beginners and professionals with great printing quality to start your 3D printing project..
  • ❤ Satisfaction Service ❤ For technical support, please reach us via Amazon message rather than ” Creality Official Support Center “, cause our customer service will respond to you within 24 hours no matter what question..
Check Stock

Creality CR-30 3D Printer 3DPrintMill Infinite Z Belt Printer Continuous Belt CoreXY Motion Upgraded 32-bit Silent Board Dual Gear Metal Extruder Cosplay Props Print Farm

  • Infinite-Z-axis for Endless Printing: Equipped with the rolling conveyor belt, the CR-30 enables you to print “infinitely” on the Z axis for large....
  • Rolling Conveyor Belt: The wear-resistant conveyor belt on the CR-30 features excellent layer adhesion. In addition, prints will fall off....
  • Stable Core-XY Structure: The stable and sturdy Core-XY precision structure with isosceles right triangle support gives you an extraordinary printing....
  • Dual-gear Metal Extruder: High-quality dual-gear metal extruder, provides better grip and filament pushing force, allows for large filament spools,....
  • Exclusive 3DPrintMill Slicer: Specially designed slicer CrealityBelt is available for download. It prioritizes ease of use and thus makes it easier....
Check Stock

Creality CR-30 3D Printer with Infinite Z-Axis Printing Creality 3DPrintMill with Upgraded Silent Motherboard Stable CoreXY Structure Filament Sensor and Dual Gear Metal Extruder

  • Infinite-Z-axis for Endless Printing：Equipped with the rolling conveyor belt, the CR-30 enables you to print “infinitely” on the Z axis for....
  • Rolling Conveyor Belt: The wear-resistant conveyor belt on the CR-30 features excellent layer adhesion. In addition, prints will fall off....
  • Stable Core-XY Structure: The stable and sturdy Core-XY precision structure with isosceles right triangle support gives you an extraordinary printing....
  • Dual-gear Metal Extruder: High-quality dual-gear metal extruder, provides better grip and filament pushing force, allows for large filament spools,....
  • Exclusive Printing Software：Creality 3DPrintMill FDM 3d printer has its own printing software, Creality Belt, which is specially formulated for....
Check Stock

Artillery Sidewinder X2 3D Printer, SW-X2 FDM 3D Printers Newest Model Auto Leveling, 32-Bit Silent Motherboard 95% Pre-Assembled Resume Printing Function Build Volume 300x300x400mm

  • [Direct Drive Extruder] The advanced Titan extruder solves most of the problems of filament clogging and uneven extrusion, and achieves high-precision printing. And the maximum printing speed of 150 mm/s realizes high-efficiency printing..
  • [Dual Z-Axis Synchronization System] Dual Z-axis design, double screw drive, makes sure the X-Axis always move parallel to the lattice glass build platform and improves the printing quality..
  • [Automatic Leveling] The Artillery Sidewinder sw-x2 3d printer adopts an intelligent auto bed leveling design, it can automatically adjust the hot bed before printing. And the hot bed can be heated to 110°C within 2 minutes..
  • [Resume Printing Function] The Sidewinder x2 has the function of detecting the exhaustion of filament or power failure, and continuing to print from the position where printing stopped last time after recovery..
  • [Ultra-Silent Printing] 32-bit silent motherboard and exclusive ultra-quiet stepper driver effectively reduce working noise and achieve low-decibel printing mode. Even when the machine works during night, it will not affec....
Check Stock

Official Creality Ender 3 S1 Plus 3D Printer with Sprite All Metal Direct Drive Extruder CR Touch Auto Leveling High Precision Double Z-axis Screw Silent Board Large Printing Size 11.8*11.8*11.8in

  • The Larger Printing Size: With the 11.8*11.8*11.8in larger printing size, this printer can meet more of your printing requirement. Your idea should....
  • Dual-Gear Direct Drive Extruder: Compatible with more filaments, Ender 3 S1 Plus 3d printer can print PLA, TPU, PETG, ABS.etc. It is more lighter and....
  • CR Touch Auto Bed Leveling: Upgraded CR Touch 16-point automatic bed leveling technology saves you the trouble of manual leveling. Easy to use, the....
  • Higher Printing Precision & Easy to use: Also like Ender 3 S1 and Ender3 S1 Pro, Ender 3 S1 Plus also has Z-axis dual-screw+Z-axis dual-motor design.....
  • After-sales Service and Warranty: If you have any question or need support about the product, Please press "Ask a question" through our storefront's....
Check Stock

Sovol SV01 Pro 3D Printer with Metal Direct Drive Extruder CR-Touch Silent Board Dual Z-axis 4.3 inch Handheld Color Touch Screen Flexible Magnetic Plate, Larger Build Volume 11x9.5x11.8 inch

  • ...ith self-designed Metal Direct Drive Extruder provides a more precise feed and return of the filament, make printing smoother and is compatible with various materials such as PLA / ABS / PETG and TPU. The replacement accessories of SV01 pro will be coming soon..
  • ★ Stable Dual Z-Axis Design ★ - Dual Z axis screws and stepper motors improves the accuracy and the precision of nozzles vertical movement with a specified Z axis accuracy of 0.001mm..
Check Stock