Top Duct Damper

Three-way plastic side wall/ceiling register in white 14 w X 6 h for duct opening outside dimension is 15.75 w X 8 h

  • The Listed size 14"x 6" is for inside duct opening measurement(the duct hole), actual outside dimension is 15.75" X 8".
  • All plastic construction with 1/2" fin spacing for high air flow with rust proof feature perfect for areas with high moisture.
  • Three way air deflection design with bright white face and black damper in the back.
  • Multi-shutter damper with easy handle to adjust desired amount of air flow.
  • Two screw holes on each side with two screws included.
Check Stock

8 Round Take-Off Collar w/Damper 26 ga.

  • Special Features: Pre-sealed / Low Leakage Hardware.
Check Stock

Imperial 4 in W x 4 in L White Plastic Exhaust Vent - Case Of 1

  • Exhaust duct designed with butterfly damper for maximum airflow and energy conservation.
Check Stock

Genesis & The Opening of the Way

  • The Listed size 12"x 8" is for inside duct opening measurement (the duct hole) , actual outside dimension is 13.75" X 9.75".
  • Stamped Face Steel Construction with 1/2" fin spacing for high air flow.
  • Multi-shutter damper with easy handle to adjust desired amount of air flow.
  • Individually shrink wrapped with card board pad in the back for extra protection.
Check Stock

Dundas Jafine CHK100ZW6 Vents, 4-Inch, White

  • Professional Series, 4" Wide Mouth Cap With 4" Diameter Aluminum Pipe.
  • Snug fit back draft damper helps prevent cold air, snow or rain from entering the home.
  • Damper has been designed for superior noise reduction.
  • Removable pest screen that helps to keep pests out and allows for easy cleaning of the duct.
  • Snap on pipe to cap assembly that eliminates the need for lint trapping staples.
  • UV resistant coating to prevent the cap from discoloring.
Check Stock

Draft Blocker 4 Inch - Backdraft Damper - Draft Stopper - Backflow Preventer - Vent Deflector (4'' Inch)

  • Back draft damper is made for insertion into inch ventilation ducts. The backflow damper RKI opens and closes automatically. It has a strong spring and can be installed either horizontally or vertically. The flap is suitable for retrofitting, since it is completely inside the duct.
  • Damper has 2 valves, designed for use in air conditioners (AC), dryers, exhaust, extractor or range hoods, heating ducts, vents and other HVAC applications.
  • INSTALLATION: The backflow flap is installed by inserting it into the ventilation pipe until it stops. The position of the spring should be horizontal for horizontal installations so that it can open and close optimally. The Backdraft shutter is installed so that the damper blades open only in the outflowing air direction..
  • The backflow flap opens and closes automatically at low air volumes. It has a smooth-running spring and an internal foam strip to keep the blades from rattling and can be installed horizontally or vertically.
  • Back draught valves can be inserted into ventilation ducts which are flexible or non flexible. Cannot be used with plastic ....
Check Stock

C-Box HVAC Plenum Ceiling Box 12 x 12 x 8 Round-Connects to Vent Register Diffuser

  • Our C-Boxes are built with a 1/2″ flange all the way around the square portion which can be used for attachment or folded over..
  • We also have a full line of ceiling registers and hvac fittings..
  • The best way to regulate air flow is to install a manual volume damper in the duct run..
  • Connects a 8″ Round Duct to a 12 x 12 Diffuser or Register Vent..
  • Call us with your hole size and duct size so we can help (866) 309-9899.
Check Stock

Kitchen Ventilation Low

  • DURBALE EXTERNAL BLOWER: External in-line blower for Broan range hoods provides high ventilation and durable construction to meet the needs of your....
  • STRONG OPERATION: Performs at 600 CFM and has a 120 voltage rating for an effective production.
  • EASY INSTALLATION: Unit installs remotely in the interior of the home and can use 8-position mounting brackets or be suspended with special suspension....
  • HIGH QUALITY: Specially designed resilient motor mounts and housing isolation mounts prevent vibration noise to ensure quiet operation.
  • CUSTOMIZABLE DUCT: Flexible duct design allows straight-through or right-angle connections with built-in damper and includes 10" round ductwork....
Check Stock

Backdraft Damper Galvanized Steel Inline Fan Vent with Spring-Loaded Folding Blades and 3 Pieces Duct Clamps for Ducting in Range Hoods and Bathrooms Fans 4 Inch

  • Special design: backdraft damper has a smooth-running spring and an internal foam strip to keep the blades from rattling.
  • Reliable materials: galvanized steel damper is made of quality galvanized steel, the flap leaves are made of aluminum, and the axis and spring are....
  • Easy to install: the backflow flap is installed by inserting it into the ventilation pipe until it stops.
  • Wide range of usages: these draft blocker set can be widely applied in ACs, exhaust fans, extractors, range hoods, heating ducts, vents and other....
  • Package includes: the package comes with 1 piece backdraft damper and 2 pieces duct clamps.
  • The backdraft damper is about 3.46 inches long, 3.9 inches....
Check Stock

Samsung DE92-90242E Microwave Vent Damper Genuine Original Equipment Manufacturer OEM Part

  • This part is compatible with models including.
  • SMH8165B/XAA,SMH8165ST/XAA-01,SMH8165ST/XAA-00,SMH8165W/XAA-00,SMH8165STE/XAA-01,SMH8165STE/XAA-00.
  • Vent damper DE92-90242E attaches to the outer cabinet and directs airflow through the vent duct.
  • Genuine Original Equipment Manufacturer (OEM) part. Compatible Brands: Samsung.
  • This vent damper (part number DE92-90242E) is for microwaves.
  • Unplug the microwave before installing this part.
Check Stock

Draft Blocker - 4'' Inch Backdraft Damper Duct - Draft Stopper - Backflow Preventer - Inline Fan Vent - Vent Deflector (4'' Inch)

  • Back draft damper is made for insertion into inch ventilation ducts. The backflow damper RKI opens and closes automatically. It has a strong spring and can be installed either horizontally or vertically. The flap is suitable for retrofitting, since it is completely inside the duct.
  • Damper has 2 valves, designed for use in air conditioners (AC), dryers, exhaust, extractor or range hoods, heating ducts, vents and other HVAC applications.
  • INSTALLATION: The backflow flap is installed by inserting it into the ventilation pipe until it stops. The position of the spring should be horizontal for horizontal installations so that it can open and close optimally. The Backdraft shutter is installed so that the damper blades open only in the outflowing air direction..
  • The backflow flap opens and closes automatically at low air volumes. It has a smooth-running spring and an internal foam strip to keep the blades from rattling and can be installed horizontally or vertically.
  • Back draught valves can be inserted into ventilation ducts which are flexible or non flexible. Cannot be used with plastic ....
Check Stock

Suncourt ZoneMaster Fully Adjustable Motorized Airflow Control Zone Damper, UL Listed 24VAC/20VA Plug-in Transformer Included, Compatible with Any 24 Volt Thermostat, Normally Open – 6', Silver

  • ECONOMIC SOLUTION –Protect your comfort & your wallet by limiting heating and cooling expenses in your space. This cost-efficient zone damper limits the need for excessive HVAC use and keeps your heating and air conditioning costs low over time. With a 3-year manufacturer’s warranty, this zone damper is built tokeep you comfortable year after year..
  • TOTAL ZONE CONTROL –This ZoneMaster gives you complete individual control over the climate in your space. Customize and maintain the temperature in specific rooms of your home with these zone dampers. Easily integrate it with an existing zone controller system!.
  • FRESH AIR INTAKE – Improve the quality of air in your home by installing a fresh air intake system with a Suncourt motorized airflow damper. Once damper is closed, it will block drafts, airflow and odors from flowing through. Suncourt’s dampers boast a patent-pending coupler with 0°- 90°adjustment capabilities, making them perfect for fresh air intake applications..
  • ENERGY EFFICIENT DESIGN – Take control of your comfort and preserve energy by using these automated duct dampers. When power is not supplied, the damper stays open allowing for air to flow through..
  • UL LISTED 24 VAC TRANSFORMER INCLUDED - Simple and user-friendly, this damper....
Check Stock