Top Ductile Casting

Raynesys Bench Vise, 4-1/2\ for Workbench, 4.5 Inch Table Vise Heavy Duty with 260° Flexible Swivel Base for Woodworking, Metalworking, Cutting Conduit, Drilling - Blue

  • ...l】: Mounting vise on the workbench, then you could do the work of woodworking, cutting conduit, drilling, gluing, metalworking, sanding or planing, sawing, etc. It can be used indoors or outdoors. Convenient and quick to install on or remove from kinds of workbench..
  • 【Heavy Duty Casting】: Made of high strength ductile iron and chrome-plated spindle and nuts, durable for long-term use and reliable to grip. The jaw adopts quenching and re-fire technology to increase its hardness and strength. Non-slip textured surface increases the grip force of jaw, which firmly holds the material, save time and effort when you work..
  • 【Swivel Feature】: Built in 260 degree swivel base, perfect for a wide range of clamping angles. It allows an ever greater degree of accuracy while you are working with a hand tool as there is no need to keep inserting and removing the piece you are working on..
  • 【Rubber Jaws Covers】: Packaged with 125mm rubber vise jaw covers, can be used on any metal vise for holding wood, metal, plastic, tubing, threaded items, safely protecting any flat or round product. Provide three kinds of angle for clamping items: 45°, horizontal angle, vertical angle. Please refer to the picture for angle diameter..
Check Stock

Bessey CM34DR 3-Inch x 4-1/2-Inch Malleable Deep Reach C Clamp, Black and red

  • Designed for light general purpose & DIY projects.
  • Drop forged frame with bright Galvanized finish.
  • Swivel pad moves freely to adapt to various surfaces.
  • Extra deep throat allowing a wider variety of applications.
  • High tensile ductile body with hardened spindles and pads.
Check Stock

Steel Dragon Tools® 74227 H4 Hinged Pipe Cutter 2\ - 4\ Capacity Fits REED® and RIDGID® Cutter Wheel

  • H4 will cut cast iron and ductile iron with Steel Dragon Tools H4I 03122 cutter wheels (included a.
  • H4 will cut cast iron and ductile iron with Steel Dragon Tools H4I  03122 cutter wheels.
  • Full-closed frame for maximum efficiency under minimal effort..
  • Guide fingers ensure accurate wheel alignment for even cut..
  • Steel Dragon Tools H4 will accept compatible Reed cutting wheels..
Check Stock

GETUHAND 9-1/2-inch Hex Offset Wrench, Model E-110 Hex Pipe Wrench,1-1/8' - 2 5/8' Capacity

  • ★ Hex jaw design provides a multi-sided, secure grip on all hex nuts, square nuts, unions, and valve packing nuts..
  • ★ Heavy duty, made from ductile iron and Chrome vanadium steel( jaw ), offering larger capacity than adjustable wrenches..
  • ★ Offset handle and thin, smooth jaws slip into the tightest places..
  • ★ CRV and Black finished head, sturdy ductile-iron housing prevents rust and extends service life..
Check Stock

Horsetail Hair Erhu Bow Hairs Accessory String Parts for Violin Viola Cello Instruments

  • 【Adopt Mongolian Horse Tail Hair】The Erhu bow hairs adopt genuine Mongolian horse tail hair, which is sturdyl and for long service life..
  • 【Fine Ductile】The Erhu bow hairs is excellent gripping qualities, and the fine ductile for long time to use..
  • 【Size】The Erhu bow hairs is approx 80cm / 31.5in..
  • 【Great Replacement】The Erhu bow hairs is great musical instrument replacement for violin, viola, cello and erhu bows..
  • 【Guarantee】If you are not satisfied with our product you received, you can send emails to us at any time.
Check Stock

Mahle 51617 Engine Piston Ring Set

  • Highest quality OE replacement piston ring set available - MAHLE replacement ring sets are designed with OE form, fit, and function.
  • MAHLE piston rings feature cast iron or ductile cast iron upper compression rings with a positive twist and barrel face for instantaneous break in.
  • MAHLE second rings provide superior oil control, improved combustion gas management, top ring stability, and sealing providing the best possible oil control and least amount of power loss.
  • MAHLE CP-20 oil rings provide superior oil control in all applications utilizing the exclusive 20 degree ear angle for the best possible side seal in the piston oil ring groove and simplifies installation.
  • MAHLE continues to lead the industry with SAE 9254 high alloy steel Napier second rings providing high quality grey iron/ductile iron BT and RBT second rings.
Check Stock

MAHLE 41940.010 Engine Piston Ring Set

  • Highest quality OE replacement piston ring set available - MAHLE replacement ring sets are designed with OE form, fit, and function.
  • MAHLE piston rings feature cast iron or ductile cast iron upper compression rings with a positive twist and barrel face for instantaneous break in.
  • MAHLE second rings provide superior oil control, improved combustion gas management, top ring stability, and sealing providing the best possible oil control and least amount of power loss.
  • MAHLE CP-20 oil rings provide superior oil control in all applications utilizing the exclusive 20 degree ear angle for the best possible side seal in the piston oil ring groove and simplifies installation.
  • MAHLE continues to lead the industry with SAE 9254 high alloy steel Napier second rings providing high quality grey iron/ductile iron BT and RBT second rings.
Check Stock

MAHLE 51870CP Engine Piston Ring Set

  • Highest quality OE replacement piston ring set available - MAHLE replacement ring sets are designed with OE form, fit, and function.
  • MAHLE piston rings feature cast iron or ductile cast iron upper compression rings with a positive twist and barrel face for instantaneous break in.
  • MAHLE second rings provide superior oil control, improved combustion gas management, top ring stability, and sealing providing the best possible oil control and least amount of power loss.
  • MAHLE CP-20 oil rings provide superior oil control in all applications utilizing the exclusive 20 degree ear angle for the best possible side seal in the piston oil ring groove and simplifies installation.
  • MAHLE continues to lead the industry with SAE 9254 high alloy steel napier second rings providing high quality grey iron/ductile iron BT and RBT second rings.
Check Stock

Lackmond LSE - Metal/Ductile Saw Blade - 14 Steel Cutting Tool with Vacuum Brazed Diamond Tip & 20mm Arbor - LSE1412520

  • SEGMENTED CONFIGURATION – Ideal to use on ductile iron. The blade gullets aid in airflow and heat dissipation.
  • VACUUM BRAZED DIAMONDS – The diamond rim and steel core ensure the LSE series blades cut fast and have a long lifespan.
  • EXPERT DESIGN – Great for cutting metal, stainless steel, ductile iron, rebar, PVC, fiberglass, and more.
  • BUILT FOR THE PROFESSIONAL – This is the ideal diamond saw blade for construction workers, carpenters, general contractors, serious DIYers, and tradesmen.
  • EQUIPMENT – Designed to be used on hand grinders, circular saws, hand held saws and chop saws. Can be used wet or dry.
Check Stock

Lackmond LSE - Metal/Ductile Saw Blade - 16 Steel Cutting Tool with Vacuum Brazed Diamond Tip & 1 - 20mm Arbor - LSE161251

  • SEGMENTED CONFIGURATION – Ideal to use on ductile iron. The blade gullets aid in airflow and heat dissipation.
  • VACUUM BRAZED DIAMONDS – The diamond rim and steel core ensure the LSE series blades cut fast and have a long lifespan.
  • EXPERT DESIGN – Great for cutting metal, stainless steel, ductile iron, rebar, PVC, fiberglass, and more.
  • BUILT FOR THE PROFESSIONAL – This is the ideal diamond saw blade for construction workers, carpenters, general contractors, serious DIYers, and tradesmen.
  • EQUIPMENT – Designed to be used on hand grinders, circular saws, hand held saws and chop saws. Can be used wet or dry.
Check Stock

COGNATIVE 6 Heavy-Duty Bench Vise Ductile Iron Bench Vise 6 Inch 360° Swivel Bench Vise with Anvil Blue

  • Durability and Sturdy -- our bench vise is made from high-strength Ductile iron 60,000 PSI, Blue fine powder coated body, zinc plated spare parts for....
  • Specification -- Jaw width: 150mm(6"), Jaw Opening:155mm(6.1"),Throat Depth:87mm(3.4").
  • Applicable Scene -- This 6" heavy-duty professional bench vise is suitable for use in the workshop, great for woodworkers, fitters, etc., and this....
  • Easy Using -- There are straight scale and round scale on our ductile iron bench vise body for more precise positioning works, easy mounting on the....
  • Customer Service -- We are committed to providing customers with satisfactory products and services. If you have any questions about the products,....
Check Stock

Housolution Bench Vise 4 Inch, 360°Swivel Base Bench Clamp with 100mm Vise Jaw, Home Vise Clamp-On Vise Repair Tool Work Bench Vice for Cutting Conduit, Drilling, Metalworking - Black & Blue

  • ... Maximum opening of jaw is up to 3.5inch/9cm, jaw length 4inch/10cm, throat depth 2inch/5cm, clamping force: 10KN.
  • this bench vise fits most workbench, and kinds of thickness of tables. 0.8cm/0.31inch thickened jaw provides long-term durability and heavyduty gripping..
  • 【Heavy Duty Casting】: Made of high strength ductile iron and chrome-plated spindle and nuts, durable for long-term use and reliable to grip. The jaw adopts quenching and re-fire technology to increase its hardness and strength. Non-slip textured surface increases the grip force of jaw, which firmly holds the material, save time and effort when you work..
  • 【360 Degree Swivel Base with Dual Locking Nuts】: Built in 360 dergree swivel base, perfect for a wide range of clamping angles. Even if you are a left-hander, you can rotate the vise to the position that suits your work. The dual locking nuts helps to clamp the work piece properly..
  • 【Magnetic Vise Jaw Pads with Multi Grooves】: Packaged with 100mm rubber vise jaw covers, can be used on any metal vise for holding wood, metal, plastic, tubing, threaded items, safely protecting flat or round product. Provide three kinds of angle for clamping items: 60°, horizontal angle, vertical angle. Please refer to the picture for angle diame....
Check Stock