Top Duplex Board
UCTRONICS Fan Adapter Board for Raspberry Pi Upgraded Complete Enclosure and Raspberry Pi Cluster Case, Compatible with Raspberry Pi 3/3B+/4B, Output 5V Power
- This fan adapter board is designed for Raspberry Pi desktop cluster cases and supports any Raspberry Pi motherboard with micro USB or USB C power..
- With 4 pins on the adapter board, it can provide 5v power to two fans, which is the best way to power your fans when your Raspberry Pi GPIO is occupied by the PoE hat and keep your device cool at all times..
- Plug and play: The fan adapter fits any 5V fans with an XH2.54 duplex connector. Simply plug the red wire of the fan connector into the positive and the black wire into the negative to run. Size:0.51*0.59 inch..
- Compatible ASIN List: Raspberry Pi Complete Enclosure: B09JNHKL2N, B09S11Q684.
- Raspberry Pi Cluster Case: B099RR1ZCT, B09K439BTY all are suitable for this fan adapter..
Check StockTRENDnet 8-Port Gigabit PoE+ Switch, 8 x Gigabit PoE+ Ports, 123W PoE Power Budget, 16 Gbps Switching Capacity, Desktop Switch, Ethernet Network Switch, Metal, Lifetime Protection, Black, TPE-TG80G
- ETHERNET PORT INTERFACE: 8 x Gigabit PoE+ ports.
- POE+ POWER BUDGET & SWITCH CAPACITY: 123 W PoE power budget supports up to eight power over Ethernet devices and the 8-port gigabit PoE+ network switch provides 16Gbps switching capacity to support edge network installations.
- COMPACT FANLESS DESIGN: With a compact and lightweight rugged metal housing design, this desktop switch is well-suited for desktop installations. Its fanless design is ideal for quiet environments that require silent operation.
- DATA TRANSFER RATE: Ethernet: 10 Mbps (half duplex), 20 Mbps (full duplex), Fast Ethernet: 100 Mbps (half duplex), 200 Mbps (full duplex), Gigabit: 2000 Mbps (full duplex).
- OPERATING TEMPERATURE: This 8-port gigabit PoE+ network switch is rated with an operating temperature range of 0 – 45 °C (32 - 113 °F).
Check StockTRENDnet 8-Port Unmanaged Gigabit GREENnet Desktop Metal Switch, Ethernet Splitter, Fanless,16Gbps Switching Capacity, Plug & Play, Lifetime Protection, TEG-S80G,Black
- ETHERNET PORT INTERFACE: 8 x Gigabit Ports.
- SWITCH CAPACITY: 8 gigabit ports provide high-speed network connections to devices and a 16Gbps switching capacity allows data traffic to flow smoothly, reducing traffic bottlenecks..
- COMPACT FANLESS DESIGN: This Gigabit Ethernet switch has a compact and lightweight metal housing design that is well-suited for desktop installations. Its fanless design is perfect for quiet environments that require silent operation..
- ENERGY SAVINGS: This 8 Port switch includes GREENnet technology that provides cost savings and reduces power consumption by up to 70%, by limiting port power consumption during periods of low link utilization..
- DATA TRANSFER RATE: The gigabit switch Data Transfer Rates-Ethernet: 10Mbps (half duplex), 20Mbps (full duplex), Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex), Gigabit: 2000Mbps (full duplex).
- TRENDnet LIFETIME PROTECTION: All metal TRENDnet switches come with lifetime manufacturer protection..
- Temperature : Operating: 0 Degrees ~ 40 Degrees Celsius (32 Degrees ~ 104 Degrees Fahrenheit), Storage: -10 Degrees ~ 70 Degrees Celsius (14Degrees ~ 158 Degrees Fahrenheit ).
Check StockMMDVM Duplex Hotspot Module Dual Hat V1.3 Support P25 DMR YSF NXDN DMR Slot 1 + Slot 2 for Raspberry pi with USB Port (Without OLED)
- if the board fails to work on duplex mode, please run the upgrade command: sudo pistar-mmdvmhshatflash hs_dual_hat.
- HIGH PERFORMACE: 32-bit ARM processor, up to 10mW RF power, fully tested every piece..
- WIDELY COMPATIBLE: Supports DMR, P-25, D-Star and System Fusion.
- WORK with RASBERRY Pi: Mounts cleanly on current Raspberry Pi including the Pi Zero , NOT compatible with Rasberry Pi 4..
- Update new FW: (pi-star / expert / ssh access / user :pi-star pass:raspberry) then run sudo pistar-mmdvmhshatflash hs_dual_hat set Jumper BOOT0=1,BOOT1=0 and soler JP1 First! After upgraded finished, disconnect JP1.
- FREQUENCY: Radio Frequency : Freq:144-148,219-225, (Main Band) 420-475,842-950 NOTE: TX =0, RX=0. Modem select: STM32-DVM/MMDVM_HS-Raspberry pi Hat(GPIO) or any other (GPIO board).
Check StockTRENDnet - TEG-S16G 16-Port Unmanaged Gigabit GREENnet Switch, TEG-S16G, 16 x RJ-45 Ports, 32 Gbps Switching Capacity, Fanless, Rack Mountable, Network Ethernet Switch, Lifetime Protection Black
- ETHERNET PORT CONFIGURATION: 16 x Gigabit RJ-45 Ports.
- GIGABIT SPEEDS: 16 gigabit ports provide high-speed network connections to devices and a 32Gbps switching capacity allows data traffic to flow smoothly, reducing traffic bottlenecks.
- RACKMOUNT DESIGN: The 16 Port Gigabit switch is designed with a sturdy rackmount metal design with a built-in power supply.
- GREENnet ENERGY SAVINGS: The 16-Port Gigabit GREENnet switch, provides high bandwidth performance, ease of use, and reliability.
- Reducing power consumption by up to 70%. GREENnet technology automatically adjusts power consumption as needed, resulting in substantial energy savings.
- TRENDnet LIFETIME PROTECTION: All metal TRENDnet switches come with lifetime manufacturer protection.
- DATA TRANSFER RATES: Ethernet: 10Mbps (half duplex), 20Mbps (full duplex).
- Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex).
Check StockXerox Duplex Travel Scanner, USB Powered, 2-Sided Scanning
- Xerox Duplex Travel Scanner - USB 2.0 Cable - Carrying Bag - Carrier Sheet (Clear Plastic Sleeve to Protect Fragile Originals) - Calibration Sheet and Cleaning Cloth - Quick Install Card - Technical Support Card - Driver and Software DVD-ROM - Original Box.
- Simplex or Duplex: Duplex (two side scanning).
Check StockTRENDnet 8-Port GREENnet Gigabit PoE+ Switch, Supports PoE and PoE+ Devices, 61W PoE Budget, 16Gbps Switching Capacity, Data & Power Via Ethernet to PoE Access Points & IP Cameras, Black, TPE-TG82G
- ETHERNET PORT CONFIGURATION: 8 Gigabit PoE+ ports with LED indicators provide a 16Gbps switching capacity to support edge network installations..
- DESKTOP DESIGN: With a compact and lightweight metal housing design, this Ethernet switch is well-suited for desktop installations..
- PoE+ POWER: A 61W PoE power budget supports up to eight Power over Ethernet devices. TPE-TG82g, delivers data and power over existing Ethernet cables to Power over Ethernet (PoE) devices such as Access Points and IP Cameras..
- PLUG-AND-PLAY: Simply power up the switch and plug in connected devices. No software to install or configuration needed..
- DATA TRANSFER RATE: Ethernet: 10Mbps (half duplex), 20Mbps (full duplex) Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex) Gigabit: 2000Mbps (full duplex).
Check StockTRENDnet 5-Port Gigabit PoE+ Switch 31 W PoE Budget 10 Gbps Switching Capacity Data & Power Through Ethernet To PoE Access Points And IP Cameras Full & Half Duplex Black TPE-TG50g
- ETHERNET PORT CONFIGURATION: 4 Gigabit PoE+ ports and 1 Gigabit port with LED indicators, provides a 10Gbps switching capacity to support edge network installations..
- DESKTOP DESIGN: With a compact and lightweight metal housing design, this Ethernet switch is well-suited for desktop installations..
- PoE+ POWER: A 31W PoE power budget supplies up to four Power over Ethernet devices. TPE-TG50g, delivers data and power over existing Ethernet cables to Power over Ethernet (PoE) devices such as access points and IP cameras..
- PLUG-AND-PLAY: Simply power up the switch and plug in connected devices. No software to install or configuration needed..
- DATA TRANSFER RATE: Ethernet: 10Mbps (half duplex), 20Mbps (full duplex) Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex) Gigabit: 2000Mbps (full duplex).
Check Stock6Pcs M3 Duplex Bolt Cable Clamp Duplex Wire Rope Clamp Double Clamp Wire Rope Clamps 304 Stainless Steel Cable Clamps Accessories for Industry Construction Home
- Material : Made from 304 stainless steel for corrosion resistance and durability, thick material, large bearing capacity..
- The M3 duplex bolt cable clamp is suitable for 3 mm wire rope..
- Easy to use : The duplex wire rope clamp is made of bolt bases and nuts, washers , which has stronger locking ability and more stability. Duplex clamp is characterized by simple and practical design and easy to use. When you use it, twist the nut with a wrench on the double chuck, then wind the cable on each side of the bolt, and then use a suitable wrench to tighten the nut..
- Wide application : Heavy duty wire rope clips is a necessity of our life. Duplex clamp can be used to fix clothesline, sun sail, awning, banner, cable, and can also be widely used in industry, construction, transportation, ship and anchor. For safety, make sure to use the correct number of cable clamps. It is recommended to use 3 duplex clamp at each end to prevent the cable ends from slipping out..
- Package : You will get 6x M3 double clamp wire rope clamps..
Check StockWalker and Hawkes Men s Derby Tweed Shooting Hunting Country Jacket XX-Small Dark Sage
- LC female to LC female Fiber Coupler connect two Duplex LC/LC patch cords together.
- 6 Pack LC-LC Duplex Fiber Optic Couplers/Adaptors.
Check StockYealink Bluetooth Speakerphone Conference Microphone Teams Certified CP700 USB Full Duplex Noise Reduction Algorithm Home Office 360° Voice Pickup Teams Optimized CP700
- FULL-DUPLEX SPEAKERPHONE: What’s the Difference Between Half Duplex and Full Duplex ? a full duplex speakerphone setup allows multiple users to....
- SIMPLE SETUP & STABLE CONNECTION:YEALINK conference speakerphone could be connected via USB, Bluetooth, dongle without any extra IT required or....
- IDEAL SOLUTION OF NOISE CANCELING:Yealink Bluetooth speakerphone could eliminate background noise whether working in a shared or public workspace or....
- SPEAK SMOOTH & HEAR CLEAR:More than 2,000,000 users have a good conference experience with YEALINK, Redefine Your Workspace. 2 built-in....
- CONTACT US WHEN ANY QUESTION:YEALINK Warranty: 30 days money back, 60 days free return, life time warranty. This Package including 1 Pc CP700....
Check StockSyba Dual Port Gigabit Ethernet PCI Express 2.1 PCI-E x1 Network Adapter Card (NIC) 10/100/1000 Mbps Card with Realtek RTL8111 Chipset, 2 Port (SD-PEX24041)
- PCIe x1 Lane with 2 5Gbs full duplex channel.
- Backwards compatible to 10/100 BaseT networking.
- 10/100/1000Mbps data rate auto negotiation operation.
- Fully compliant with IEEE 802 3 802 3u 802 3ab.
- PCIe x1 Lane with 2.5Gbs full duplex channel.
- Fully compliant with IEEE 802.3, 802.3u, 802.3ab.
- Supports IEEE 802.1P Layer 2 Priority Encoding.
- Crossover Detection and Auto Correction operation.
Check Stock