Top Durable J bolts

Snow Joe Ultra SJ618E Electric Snow Thrower Hardware Pack

John Deere 44 inch Snow Blower for 100 Series 700BM (BM27439)

J bolt gate Hinges Heavy Duty 5/8\ pivot hinge Adjustable Barrel Driveway Pair for welding

• Steel 5/8" J-Bolt Adjustable Barrel hinges provide full range of swing for gates and doors. The length of the threaded arm measures 4.3". Welding plates are 0.25" thick, and the barrels are 1"..
• These heavy duty hinges are just what you need to hang doors and gates where you require full range of motion. Made of high quality steel with a black powder coating. Comes with all necessary hardware, no need for extra pieces, like springs. These J-hook style hinges are heavy duty, and excellent for gate hinges hardware, door hinges, chain link fence parts, swing gate openers, blast gates, driveway gates, and even as gate latches for metal gates, in general..
• To Install - Weld the flat backing plate to the mounting post. If not already available, drill a hole through the gate frame big enough for the threaded bolt. Pass the bolt through, and secure with nuts. Hinges must be mounted with the thread arm at the top. If mounted upside down, the gate will fall..
• Minimum distance between post and gate should be 1.5.

ARONOVA Battery Hold Down Sets,With Billet Aluminum Battery Tie Down Bracket And 18-8(304) Stainless Steel J bolts(Red, 8 inch bolts)

• Premium 6061 aluminum crossbar & 18-8 Stainless steel j bolt sets..
• Designed for batteries 6.89" (175mm) wide or slightly narrower..
• Tie down bracket overall length - 8.58" (218mm),bolt center to bolt center length - 7.48" (190mm).Available in 8/10 inch j hooks.
• Exclusive Finishment: Dual surface treatment, Eliminate the mill marks and burrs of CNC machining,and the bracket is sand-blasted and anodized for an elevated, frosted texture..
• Usually fits most group 21, 21R,22F,22HF,22R, 24, 24F, 24H, 24R, 24T, 25, 26, 26R, 26/70 27, 27F, 27H, 28, 29H, 30H, 31, 31A, 31T, 33, 34, 34R, 34/78, 35, 40R, 41, 42, 43, 46, 47, H6(48), H8(49), 85, 86, 90, 91, 92, 93, 94R,95R, 96R,97R, 98R, 99, 124, and 140R batteries.(Tips: this tie down will NOT fit between raised vent caps on the surface of some batteries).

J-Bolt Post Hinge 6\ - Hinge Bolts Thru The Post Includes Nuts - J-Bolt Hinge has 5/8\ Male Pin - Fence Bolt Though Post Hinge - Quantity 2

• Dimensions - 6" length (4.25" usable thread) - .625 diameter - 5/8" hinge pin - pin height ~1.5".
• J-Bolt Hinge has 5/8" hinge pin to work with common gate frame hinges.
• 6" Gate Hinge is made of galvanized steel to prevent rust and corrosion.
• J-Bolt thru post hinges are easily adjusted even after the gate is installed.
• Nuts for gate hinge are included - Washers are NOT Included.

MEROM Halo Bolt AC Adapter Halo Wall Plug Car Jump Starter Charger Cord Replacement Compatible with Halo Bolt 55720/58830/Halo Bolt 1201 Jump Starter/Bolt ACDC Wireless/Bolt Air Portable

• 【Specification】For Halo Bolt car jump starter charger AC adapter with 5ft/1.5M long enough power cord, input AC 100V-240V.
• 【Compatibility】This Replacement Halo Bolt Charger Compatible with HALO BOLT 57720/58830/HALO1201/ACDC 58830 Portable Charger, Car Jump Starter CEN TECH 4 IN 1/3 IN 1 CENTECH Portable Power Pack Battery.
• Peak 350 AMP J7CS/J45TK 700 AMP J5C09/STA-J5C09/J312/DPS109/STA-DPS109 Jump Starter.
• Solar Jump-N-Carry 660/KKC-660/JNC660/SOLJNC660-BF Jump Starter (NOTE⚠️Pls read carefully above selected models before order⚠️).
• 【Quality Assurance】This Charger for Halo Bolt car jump starter is made of high quality materials, the wire adopt PVC material to ensure it has a great performance on tensile resistance, anti-aging, anti-corrosion, anti-cracking..
• 【Security】This Replacement Halo Bolt charger is Tested, approved and certified by FCC, CE and ROHS, and designed with safeguard features against short circuiting, overvoltage, overcurrent, and internal overheating..

Steel J-Bolt Hinge Doors Gates 1/2 Inch Heavy-Duty Welded Hinge Heavy-Duty Driveway Gates for Welding on Larger Iron or Steel Gates, 2 Packs

• J-Bolt Hinge is the perfect accessory for your iron gate or revolving door..
• J hinges made of heavy and strong iron, you can use it for a long time..
• The hinge pivots on an adjustable steel ball bearing and includes a grease fitting which keeps the bearing lubricated.
• Product dimensions: please see product images..
• Package Include: 2 Packs welded hinge, 2 bolts, 4 nuts, and 4 washers..

Signature Fitness SF-3 1,500 Pound Capacity 3” x 3” Power Cage Squat Rack Includes J-Hooks and Safety Straps Other Optional Accessories Red

• Dimensions: 83.46" Height, 51.18" Width, 38.78" Depth.
• Fully adjustable J-Hook and Safety Strap position - 47 vertical holes and "westside" spacing on bottom half of each upright pole allowing for the....
• Built with 3"x3" 11-gauge steel - maximum stability and durability, holds up to 1,500lbs.
• Includes multi-grip pull up bar along with bolts and instructions to bolt rack into the ground or floor.
• Includes UHMW-coated J-Hooks and safety straps - 200 dollar value, free.
• many additional accessories available for purchase.

IAP Performance 043101355CK Complete Dual Port Cylinder Head with Sensor Hole for VW Beetle

• 【Premium Material】Made from quality steel with black coating, corrosion and rust resistance, sturdy and durable..
• 【Function】This tool is attached to the cylinder head, used to lift the cylinder head from the engine..
• 【Application】Suitable for Detroit diesel 60 series engines..
• 【Easy & Convenient to Use】Remove the cylinder head bolts and install the cylinder head lifter bracket (J–35641–A) using the bolt hole at the inboard center, then attach a suitable lifting hook to the eyelet in the lift bracket, and lifter the cylinder head off the engine..
• 【100% Satisfaction Guarantee】Our focus on products and customer services is 2nd to none. If you're not 100% satisfied with this Cylinder Head Lift Bracket, simply return it for a full refund in 30 days..

Spurtar Battery Hold Down Kit, 10.63'' 27CM J-Bolt Style Car Battery Holder, Universal Car Battery Hold Down Adjustable Battery Hold Down Bracket, Battery Tie Down for Car SUV RV

• Fits Most Battery Sizes: Adjustable top compression design of the automotive battery hold down kit fits batteries up to 8.5"(W) x 10.63"(H), *Please confirm your battery size before buying, if our bolts are too long, you can Cut to size to fit your battery.
• Adjustable: Simple yet universal design fits most Car, Suv, Truck, Boat,s and Ship batteries. This car battery braket can adjust to the width of any battery. The vertical posts are taller than a typical car or truck battery.
• Holds Batteries in Place: The J-bolt Length of the battery car holder is 10.63in (27 cm). Safely holds group 24/24M automotive and ship batteries in place to prevent movement during transportation. Practical, stable, and safe.
• High Quality: This car battery holders are made of heavy-duty stainless-steel material, strong and hard, durable in use. Special anodized black surface finish process for corrosion and rust resistance.
• Easy to Install: The upgraded J-Hook can hold the battery stably without slipping out of the tray easily. 【24H SUPPORT】If you find any missing parts or are not sure if it is suitable for your battery, please contact us directly, we will be more than happy to serve you!.

PCE by Speedmaster PCE435.1067 Fits Chevy BBC 454 Hyd FT Cylinder Head Top End Engine Combo Kit

• 【Great Compatibility】A perfect repairing kit for Detroit diesel 60 series engines..
• 【J-35641-A Cylinder Head Lift Bracket】 This tool is attached to the cylinder head and used to lift the cylinder head from the engine..
• 【J-35996-A Rocker Arm Lifter】Used to easily lift the rocker arms from the engine without damage to the car parts. Helps for removing all the rocker shaft mounting bolts and nut from the front or rear rocker shaft assembly..
• 【Superior Material】Made from high grade and heavy duty steel with black anti-oxidant coating, corrosion and rust resistance, sturdy and durable..
• 【100% Satisfaction Guarantee】If you're not satisfied with this set, simply return it for a full refund in 30 days. While you have any questions about our products, please feel free to contact us and we will provide the best service. Always buy confidently in Bonbo!.

OTC 6779 Injector Puller for 2005-2011 GM Duramax Engines

• OTC Injector Puller for GM Duramax engines - similar to Kent Moore J-46594.
• For use on 2005-2011 model year GM Duramax 6.6L engines.
• Safely pulls the injectors from the cylinder heads without pulling the injector cups.
• Simply insert the tool into the injector retainer bracket bolt hole, attach a socket and ratchet/breaker bar to one of the hex ends and start rocking back and forth - the injector will pop right out.
• Durable steel construction means tool will withstand heavy shop use and continue to perform as designed.