Top Durable Tool Tray

ABN Flexible Tool Tray, 3pk - Silicone Rubber Tools Organizer, Non Slip Tool Holder Tray for Organizing Parts, 3 Sizes

  • [Organize Your Tools]: Whether you are performing maintenance on your vehicle or crafting a DIY project, use the ABN Orange Rubber Tool Tray Flexible Non Slip Tool Tray 3 Pack to hold parts and tools for you.
  • Use each silicone tool tray for your workshop and garage.
  • [No More Slippage]: Save time and energy using these parts tray containers to prevent the dropping of your parts and tools.
  • Non-slip smooth backing of tool tray holder allows you to place holder on curved or slanted surfaces.
  • [Sections for Your Tools]: Keep your tools and small parts on hand while you work on your vehicle or are woodworking.
  • Each flexible nonslip tool holder has space to hold your wrenches, nails, sockets, screws, and more in the included variety of pockets, notches, holes, and ridges for your tools and parts.
  • [Flexible Silicone Rubber]: No need to worry about these non slip flexible tool organizer caddies falling apart after extended, repeated use.
  • Silicone parts tray allows for the easy cleanup of grime, dirt, and oil.
  • [Perfect Size]: Set rubber work tray in your toolbox, your car's engine compartment, or even the wing of your plane.
  • Package includes 3 flexible non slip tool mats.
  • Mats included measure 10.5 x 5.5, 10 x 9, and 21 x 14 inches (26 x 13, 25 x 22, 53 x 35cm).
Check Stock

DMI Walker Tray Rollator Tray Mobility and Walker Accessory Tray Table Fits Most Standard Walkers Folding with Two Cup Holders and Tool Free Assembly 16 x 11.8

  • ... disabled have no tool assembly and quickly and easily snaps in place. Tray locks in place while raised for safety and reliability of carrying around food, books, drinks, phone, purses or wallets. Also great for reading, crafting, writing or computer work.
  • WALKER TRAY WITH CUP HOLDERS is easy to clean and is made of durable, lightweight plastic.
  • TRAY TABLE FOR WALKER measures 16 x 11.8 x 2 with two deep and stable cup holders. Walker tray is 18 inches between the centers. To install: Snap all four vinyl coated metal clips onto walker legs. When securely fastened, raise tray into an upright position until it locks in place. To lower, raise tray gently and slide metal brackets forward to release. Tray folds flat and out of the way. Tray has a weight capacity of 5 pounds.
Check Stock

NAHANCO SHGL1248 12\ x 48\ Shelves, 1 -Shelf (Pack of 5)

  • The item is LeHigh Crawford 4 Bin Pegboard Tool and Parts Tray #PT16.
  • Used for Building Materials & Ladders, Raw Building Materials.
  • Tool and parts tray embossed standard and metric rule.
  • Made of durable plastic that holds up to 10-Pound.
  • Includes 4 parts bins, hold up to 16 hand tools and drill bits.
  • Fits both 1/8-Inch and 1/4-Inch pegboard.
Check Stock

Garden Cart Rolling Stool with Wheels, Seat, and Tool Tray for Weeding, Planting, or Lawn Care – Gardening Accessories and Supplies by Pure Garden

  • GARDEN CART – This rolling garden stool is ideal for any gardening enthusiast to alleviate back and knee pain when planting or weeding. In addition, this rolling cart can be used for other tasks around the home like painting, cleaning, car repair, more!.
  • EASILY TRANSPORTS – The gardening chair features sturdy plastic wheels that are 3” in diameter and can roll forwards and backwards on most level terrains. The lightweight materials also make it easy to lift and carry this scooter to the next project!.
  • DURABLE MATERIALS – The durable plastic construction of the 4 wheels gives an advantage over rubber tires, which could pop under pressure or puncture. The stainless-steel structure is built to last through all climate conditions..
  • TOOL TRAY INCLUDED – The specially designed tool tray underneath the seat conveniently keeps small garden supplies or household tools within reach. This strategically placed shelf is the perfect area to store gardening accessories and more!.
  • PRODUCT DETAILS- Seat Dimensions: 11” x 11.5”. Full Dimensions: 13” (H) x 18.5” (L) x 17.5” (W). Tool tray dimensions: 16” x 12”. Weight limit: 200 lbs. Material: PVC plastic and stainless steel. Colors: Black and green..
Check Stock

Louisville Ladder FS1510 Fiberglass Step Ladder, 10 Feet, Orange

  • SUPERIOR BUILD: This 10-foot stepladder is made of superior quality, non-conductive fiberglass, helping to keep you safe when around electricity..
  • STURDY AND STRONG: With its 300-Pound capacity, elegant design and smooth finish, you won’t find a more durable, reliable ladder..
  • DESIGNED FOR YOUR NEEDS: Molded top with recessed tray and handyman's tool slots, nonconductive structural molded top improves productivity by keep tools with you at the top of the ladder.
  • PROTECTED: Inside spreader braces keep your ladder protected while in transport as well as provide as safe and stable ladder.
  • MEETS OR EXCEEDS INDUSTRY STANDARDS: Louisville Ladder commitment to your safety requires we meet or exceed all safety standards set by ANSI and OSHA.
  • Louisville exclusive Pro Top design, 300-pound load capacity includes weight of user and tools.
  • Does Not Include magnet tray, hardware tray, curved front, drill and tool slots, paint bucket holder, and pipe holder.
  • Each step secured with six, large-headed, semi-tubular steel rivets for maximum strength.
  • Nonconductive full channel rails are covered with a polyester veil for years of durable service.
  • Meets or exceeds ANSI and OSHA safety standards.
Check Stock

Metaltech CISTR Jobsite Series 6' Baker Tool Tray

  • UNCLUTTER YOUR TOOLBOX DRAWER – The Compact Tool Sorter Pliers Organizer holds up to 11 pliers. It helps unclutter your toolbox and create more room for even more tools.
  • ORGANIZE YOUR TOOLS – Tool Sorter Pliers Tray organizes your tool chest. Tools are easily visible and your tool box drawer will look clean and organized.
  • RECLAIM SPACE – The compact Tool Sorter Pliers Tray saves tons of space, creating more room for even more tools. Tray measures 13 x 10 x 1.25 inches.
  • STORE A VARIETY OF TOOLS – Tool Caddy holds a variety of tools, including adjustable wrenches, metal files, chisels, etc. Graduated compartments and open end give flexibility for tools of varying dimensions.
  • MADE IN THE USA – All Tool Sorter Organizers are tough built right here in the USA.
Check Stock

Tool Sorter Screwdriver Organizer – Black

  • ✅ SCREWDRIVERS ORGANIZED – This screwdriver tray organizes your screwdrivers in a logical way. Quickly and easily find the right tool. No more rifling through your tool drawer looking for the right tool.
  • ✅ CLEARLY SEE EACH SCREWDRIVER – This screwdriver organizer gives you easy identification without confusion over type and size. Each tool has its spot and you will see clearly if a tool is missing.
  • ✅ UNCLUTTER YOUR TOOLBOX DRAWER – The Compact Tool Sorter screwdriver tray holds up to 16 screwdrivers. It helps unclutter your toolbox and create more room for even more tools.
  • ✅ FITS MOST TOOLBOX DRAWERS – Low profile tray fits even shallow drawers giving you greater flexibility. Measures 13" x 10" x 1".
  • ✅ BUILT TOUGH IN USA – All Tool Sorter products are made of the highest quality materials and crafted right here in the USA. They will stand up to your projects.
Check Stock

DeWalt DXL3010-04 Fiberglass Stepladder, 4-Feet, Black

  • STURDY AND STRONG: With its 300-Pound capacity, elegant design and smooth finish, you won’t find a more durable, reliable ladder.
  • SAFETY AND COMFORT: Extra wide steps that provide 25% more standing surface.
  • WORK STATION KEEPS YOUR TOOLS AT HAND: Exclusive WORK STATION system has plenty of features to improve performance when working electrical, construction, and residential jobs. It includes a magnet tray, hardware tray, curved front, drill and tool slots, paint bucket holder, and pipe or 2x4 holder.
  • SAFE AND STABLE with double rivet step construction, and semi tubular steel rivets.
  • MEETS OR EXCEEDS INDUSTRY STANDARDS: Commited with your safety requirements, this ladder meets or exceeds all safety standards set by ANSI and OSHA.
  • Durable top with magnet and multiple tool slots.
  • Pinch resistant spreader braces provide stability.
  • 25-Percent greater step surface to provide greater comfort.
Check Stock

2-Piece Magnetic Parts Tray and Telescoping Pick-Up Tool Kit | 6” Large Size Round Tray and 3-Lb Capacity Pen Style Pickup | Keep Screws, Bolts, Nuts, Nails and Small Tools in Place and Never Get Lost

  • ▲ POWERFUL MAGNETIC TRAY - The 6-inch large size round bowl holds your parts, fasteners, hardware, and small tools organized in place and also within reach of work area.
  • ▲ CONVENIENT PLACEMENT - Mount the tray horizontal, vertical, and even upside down to the hoods and fenders of a car, or any ferrous metal surfaces like tool chest and tool cabinet in your garage and shop.
  • ▲ NON-MARRING DESIGN - Soft rubber tray base prevents any scratch or damage to the finished surfaces of your vehicles and equipment during attaching.
  • ▲ TELESCOPIC MAGNETIC PICKUP - Compact pen size pick-up tool with pocket clip extends from 5-3/8” to 26” for hard-to-reach tight spots, and retrieves ferrous metal objects up to 3 lb.
  • ▲ STURDY AND DURABLE - Both the magnetic tray and pick-up are constructed from heavy-gauge stainless steel to withstand daily uses and ensure longevity.
Check Stock

12-inch Tool Box Black/Yellow

  • PINK TOOLBOX – Equipped with 4 removable clear plastic storage boxes and the main storage section on top that is perfect for holding bigger items....
  • PORTABLE – With sturdy latches on all the compartments and a convenient carrying handle, this pink tool chest is easily portable and travel....
  • STURDY DESIGN – Constructed from durable, high-impact polypropylene, this jewelry making organizer and included storage compartment trays are rugged....
  • MULTI-PURPOSE – This craft tool box is perfect as a small parts organizer for hardware like nails, screws, and bolts, or bead storage, fishing....
  • PRODUCT DETAILS – Material: Polypropylene. Dimensions: (L) 11" x (W) 7" x (H) 10".
  • Tray Dimensions (Each): (L) 9.25" x (W) 5" x (H) 1.25".
Check Stock

Pink Power Pink Tool Box for Women - 18" Small Metal & Plastic Portable Lightweight Pink Locking Empty Toolbox Tool Chest - Craft & Tool Case Tote Storage Tool Organizer for Ladies Pink Tool Set Kit

  • Great Gift for Mother's Day, Wife, Women, Friends, DIYer.
  • Safer with Double Lock: This toolbox is equipped with 2 durable metal latches, and blue and white zinc plating, not easy to rust. A built-in padlock eye can be used with a small lock to ensure the safety of your hand tools (Lock NOT Included)..
  • Premium Materials & Construction: The entire tool box uses sturdy PP material, which is strong and durable and not easily deformed and damaged when used. Thickened tool tray to prevent sudden breakage. The non-slip foot pad design at the bottom makes it stable in structure..
  • Great Tool Organizer: Double layer design for easy access, owning it will no longer waste time searching for tools. A removable tray with a handle allows quick access to the most frequently used hand tools. With the tray removed, the large space below allows access to less frequently used tools and keeps the toolbox organized. Top with a small parts storage area, you can store small screws, nuts, etc..
  • Size Tip: 16-inch tool box is ideal for home use, not too large to occupy more space in the home, and no....
Check Stock

OEMTOOLS 22383 4 Piece Black Aluminum Socket Tray Set, Trays for 1/4”, 3/8”, and 1/2” Drive Size Sockets, SAE Socket Tray, Socket Organizers for Toolboxes

  • MODULAR DESIGN: Organize your sockets however you want in trays and rearrange whenever needed.
  • Quickly identify the right tool every time with this tool socket organizer.
  • Additional 1/2 inch socket organizer tray to accommodate any socket collection.
  • FORM WITH FUNCTION: Rubber feet protect your workspace from scratches.
  • Non-magnetic OEMTOOLS socket tray designed to prevent metal dust buildup.
  • Anodized black finish creates a sleek toolbox appearance.
  • NEVER MISS A BEAT: Adjustable socket organization studs slide easily from either direction.
  • The socket tray SAE system guarantees your sockets stay secure while allowing for one-handed removal.
  • Our socket set organizer is designed to meet your needs.
  • INTUITIVELY CRAFTED: The billet aluminum sockets organizer construction is lightweight and long lasting.
  • Subtle socket set tray organizer design means they fit easily in any storage drawer.
  • TRAY DETAILS: 1/4” socket organizer tray set measures 9” x 3”.
  • (2) 1/2” socket holders organizers for tool box measure 12” x 3”.
  • The socket organizer for tool box drawer has adjustable studs.
Check Stock