Top Duralux Marine Paint

TotalBoat Marine Topside Boat Paint Primer for Fiberglass and Wood (Gray, Quart)

  • ONE-PART MARINE PRIMER FOR BOATS provides a durable, flexible undercoat for 1-part and 2-part polyurethane and enamel marine topside paint.
  • for use above the waterline on fiberglass, wood, gelcoat and previously painted surfaces in good condition.
  • COVERS COMPLETELY IN JUST ONE COAT: High-solids primer seals the surface with 1 thin coat.
  • apply a second coat only if a higher build is needed.
  • to fill large surface imperfections use TotalBoat TotalFair epoxy fairing compound before applying Topside Primer.
  • EASY TO APPLY BY BRUSHING, ROLLING OR SPRAYING: Use a natural bristle paint brush, a 1/8 " solvent-safe foam roller, or to spray, use a 1.1mm tip.
  • boat primer is chromate-free and lead-free.
  • DRIES FAST, CURES TO A SMOOTH, HARD FINISH: Ready to sand in 60-90 minutes at 65°F.
  • marine paint primer is easy to sand, then just wipe clean and apply a topside finish such as TotalBoat Wet Edge or TotalTread marine non-skid deck paint.
  • AVAILABLE IN WHITE AND GRAY IN QUART AND GALLON SIZES. Brush/roller application - thin with TotalBoat Special Brushing Thinner 100.
  • do not apply Topside Primer thicker than recommended or it may not cure properly.
Check Stock

Louie's Backyard Cookbook: Irrisistible Island Dishes and the Best Ocean View in Key West (Roadfood Cookbook)

  • ONE-PART MARINE PRIMER FOR BOATS provides a durable, flexible undercoat for 1-part and 2-part polyurethane and enamel marine topside paint.
  • for use above the waterline on fiberglass, wood, gelcoat and previously painted surfaces in good condition.
  • COVERS COMPLETELY IN JUST ONE COAT: High-solids primer seals the surface with 1 thin coat.
  • apply a second coat only if a higher build is needed.
  • to fill large surface imperfections use TotalBoat TotalFair epoxy fairing compound before applying Topside Primer.
  • EASY TO APPLY BY BRUSHING, ROLLING OR SPRAYING: Use a natural bristle paint brush, a 1/8 " solvent-safe foam roller, or to spray, use a 1.1mm tip.
  • boat primer is chromate-free and lead-free.
  • DRIES FAST, CURES TO A SMOOTH, HARD FINISH: Ready to sand in 60-90 minutes at 65°F.
  • marine paint primer is easy to sand, then just wipe clean and apply a topside finish such as TotalBoat Wet Edge or TotalTread marine non-skid deck paint.
  • AVAILABLE IN WHITE AND GRAY IN QUART AND GALLON SIZES. Brush/roller application - thin with TotalBoat Special Brushing Thinner 100.
  • do not apply Topside Primer thicker than recommended or it may not cure properly.
Check Stock

TotalBoat Marine Topside Boat Paint Primer for Fiberglass and Wood White Gallon

  • ONE-PART MARINE PRIMER FOR BOATS provides a durable, flexible undercoat for 1-part and 2-part polyurethane and enamel marine topside paint.
  • COVERS COMPLETELY IN JUST ONE COAT: High-solids primer seals the surface with 1 thin coat.
  • apply a second coat only if a higher build is needed.
  • EASY TO APPLY BY BRUSHING, ROLLING OR SPRAYING: Use a natural bristle paint brush, a 1/8 " solvent-safe foam roller, or to spray, use a 1.1mm tip.
  • DRIES FAST, CURES TO A SMOOTH, HARD FINISH: Ready to sand in 60-90 minutes at 65°F.
  • marine paint primer is easy to sand, then just wipe clean and....
  • AVAILABLE IN WHITE AND GRAY IN QUART AND GALLON SIZES. Brush/roller application - thin with TotalBoat Special Brushing Thinner 100.
Check Stock

TotalBoat Marine Topside Boat Paint Primer for Fiberglass and Wood White Quart

  • ONE-PART MARINE PRIMER FOR BOATS provides a durable, flexible undercoat for 1-part and 2-part polyurethane and enamel marine topside paint.
  • COVERS COMPLETELY IN JUST ONE COAT: High-solids primer seals the surface with 1 thin coat.
  • apply a second coat only if a higher build is needed.
  • EASY TO APPLY BY BRUSHING, ROLLING OR SPRAYING: Use a natural bristle paint brush, a 1/8 " solvent-safe foam roller, or to spray, use a 1.1mm tip.
  • DRIES FAST, CURES TO A SMOOTH, HARD FINISH: Ready to sand in 60-90 minutes at 65°F.
  • marine paint primer is easy to sand, then just wipe clean and....
  • AVAILABLE IN WHITE AND GRAY IN QUART AND GALLON SIZES. Brush/roller application - thin with TotalBoat Special Brushing Thinner 100.
Check Stock

E/FUSING 900 Moldable Silicone Putty

  • DEVELOPED SPECIFICALLY AS A MARINE SEALANT – Stays tough and flexible for a wide range of uses above the waterline.
  • VERY VERSATILE – Works on bare and painted metal, glass, paint, fiberglass, non-oily woods, many plastics and abraded rubbers.
  • EASY TO USE – Applies right from the container and requires no mixing..
  • HELPS KEEP WATERCRAFT LOOKING SHARP – Resists temperatures and won’t turn yellow over time.
  • DESIGNED TO ENDURE MARINE ENVIRONMENTS - 3M Marine Grade Silicone Sealant is a part of a broad range of adhesive sealants uniquely formulated for the marine market. Designed for reliable sealing performance in harsh marine environments..
Check Stock

TotalBoat Underdog Marine Antifouling Bottom Paint for Fiberglass, Wood and Steel Boats (Black, Gallon)

  • ECONOMICAL ANTIFOULING BOTTOM PAINT provides excellent single-season protection.
  • copper biocide keeps barnacles and mussels from clinging to hull bottoms.
  • ideal for sailboats, power boats, fishing and work boats in all types of saltwater conditions.
  • EFFECTIVE MARINE PAINT prevents barnacles from attaching to your hull by releasing fresh biocide as water moves under the boat.
  • durable finish withstands trailering & beaching better than traditional ablative paints.
  • FOR USE ON PROPERLY PREPARED FIBERGLASS, WOOD, STEEL, AND IRON BOAT BOTTOMS.
  • because the ablative coating wears away during the season, there’s no paint buildup, which makes your bottom paint job easier next season.
  • EASY TO APPLY: Use a natural bristle brush, or a 3/16” nap or foam solvent-safe roller, or use airless or conventional spray equipment. THINNING (10%): brush/roller – TotalBoat Special Brushing Thinner 100.
  • spray equipment – TotalBoat Spray Thinner 101.
  • AVAILABLE IN GALLON SIZE IN BLACK, BLUE AND RED COLORS. Coverage: 500 sq ft per gallon.
  • this product is a marine paint intended for antifouling use on boats, applied to hulls and boat bottoms below the waterline only.
Check Stock

TotalBoat Underdog Marine Antifouling Bottom Paint for Fiberglass, Wood and Steel Boats (Red, Gallon)

  • ECONOMICAL ANTIFOULING BOTTOM PAINT provides excellent single-season protection.
  • copper biocide keeps barnacles and mussels from clinging to hull bottoms.
  • ideal for sailboats, power boats, fishing and work boats in all types of saltwater conditions.
  • EFFECTIVE MARINE PAINT prevents barnacles from attaching to your hull by releasing fresh biocide as water moves under the boat.
  • durable finish withstands trailering & beaching better than traditional ablative paints.
  • FOR USE ON PROPERLY PREPARED FIBERGLASS, WOOD, STEEL, AND IRON BOAT BOTTOMS.
  • because the ablative coating wears away during the season, there's no paint buildup, which makes your bottom paint job easier next season.
  • EASY TO APPLY: Use a natural bristle brush, or a 3/16” nap or foam solvent-safe roller, or use airless or conventional spray equipment. THINNING (10%): brush/roller - TotalBoat Special Brushing Thinner 100.
  • spray equipment - TotalBoat Spray Thinner 101.
  • AVAILABLE IN GALLON SIZE IN BLACK, BLUE AND RED COLORS. Coverage: 500 sq ft per gallon.
  • this product is a marine paint intended for antifouling use on boats, applied to hulls and boat bottoms below the waterline only.
Check Stock

Spectre Performance 884820 Accucharge Filter Kit

  • Vision X Lighting 9891132 Duralux LED Work Light.
Check Stock

TotalBoat Underdog Marine Antifouling Bottom Paint for Fiberglass, Wood and Steel Boats (Blue, Gallon)

  • ECONOMICAL ANTIFOULING BOTTOM PAINT provides excellent single-season protection.
  • copper biocide keeps barnacles and mussels from clinging to hull bottoms.
  • ideal for sailboats, power boats, fishing and work boats in all types of saltwater conditions.
  • EFFECTIVE MARINE PAINT prevents barnacles from attaching to your hull by releasing fresh biocide as water moves under the boat.
  • durable finish withstands trailering & beaching better than traditional ablative paints.
  • FOR USE ON PROPERLY PREPARED FIBERGLASS, WOOD, STEEL, AND IRON BOAT BOTTOMS.
  • because the ablative coating wears away during the season, there's no paint buildup, which makes your bottom paint job easier next season.
  • EASY TO APPLY: Use a natural bristle brush, or a 3/16” nap or foam solvent-safe roller, or use airless or conventional spray equipment. THINNING (10%): brush/roller - TotalBoat Special Brushing Thinner 100.
  • spray equipment - TotalBoat Spray Thinner 101.
  • AVAILABLE IN GALLON SIZE IN BLACK, BLUE AND RED COLORS. Coverage: 500 sq ft per gallon.
Check Stock

Yamaha ACC-MRNPA-IT-4D Marine Spray Paint 04D, Dark Bluish Gray Metallic

  • Brand new, genuine Yamaha Marine 12oz Spray Paint. This is a factory original equipment paint, not aftermarket. Note: This paint is for engine parts (under engine cowl) use. For exterior engine paint, use part number ACC-MRNPA-IT-8D.
Check Stock

Uwariloy Paint Remover Car Paint Stripper Car Wheel Traceless Cleaning Paint Remover Stripping Metal Surface Paint Remover for Vehicles Boats Furniture - 100ml

  • Quick Peeling Model: The Paint Remover is a liquid that is combined with a solvent with high dissolving power, featuring fast paint removal speed and....
  • Corrosion-resistant: The Paint Remover is safe for the user, the substrate, and the environment, suitable for removing the car and marine paint, wall....
  • High Paint Stripping Effect: The Paint Remover makes it easy to remove paint and strip unwanted paint, saving your time and effort, perfect for....
  • Simple Use in Daily Life: Shake the Paint Remover well and sprays it on the surfaces of cars. After about 15 minutes, the original paint film will....
  • Wide Application: The Paint Remover is widely used for automobiles, motorcycles, machinery, toys, most parts of paint removers, metal and masonry....
Check Stock

TUFF BRUSH - 50 Pack of 2 inch Chip Brushes for Paint, Stains, Varnishes, Glues, Resins, and Gesso (2 inch)

  • Bulk Paint Brush Contractor Set - Includes FIFTY 50 2" Inch Chip Brushes.
  • HUGE box of bulk 2 inch paint brushes for DIY projects including home, automotive, marine, and metal work..
  • Cheap paint brushes are ideal for painting, staining, applying glues, adhesives, cleaning, arts, crafts or touch-up work..
  • Great disposable brush for paints, stains, varnish, acrylic, gesso, epoxy, resin, and fiberglass.
  • For dirty jobs its best to buy paint brushes bulk size, Contractor 50 pack provides plenty of disposable paint brushes!.
Check Stock