Top Dust Collection Blast Gates

POWERTEC 70250 6 Inch Key Hose Clamp Thumb Screw Key Adjustable Stainless Steel Hose Clamps for Dust Collectors and Dryer Vent 5 Pack Blue

  • INCLUDES: 6” Key Type Hose Clamps – Pack of 5.
  • APPLICATION: Allows you to secure your ductwork hoses and connect dust collection hoses to dust hoods, connectors, 6 inch blast gates, and other dust collection fittings.
  • EASY TURN: Hose clamp allows you to simply use the thumb screw clamp to quickly loosen or tighten it without the use of tools.
  • QUALITY: Delivers a heavy duty, leak proof and corrosion resistant hose clamping tool constructed out of premium grade stainless steel.
  • VERSATILITY: Can be used indoor and outdoor for a wide assortment of home, automotive, and DIY woodworking applications – such as securing a dryer vent hose, duct work, piping, tubes, large cables and more.
Check Stock

POWERTEC 70247 1-1/2 Inch Key Hose Clamp Thumb Screw Key Adjustable Stainless Steel Hose Clamps for Dust Collectors and Dryer Vent 5PK

  • Includes: 1-1/2” key Type hose Clamps – pack of 5.
  • Application: allows you to secure your ductwork hoses and connect dust collection hoses to dust hoods, connectors, 1. 5 inch blast gates, and other dust collection fittings.
  • Easy turn: hose Clamp allows you to simply use the thumb screw clamp to quickly loosen or tighten it without the use of tools.
  • Quality: delivers a heavy duty, leak proof and corrosion resistant hose clamping tool Constructed out of premium grade stainless steel.
  • Versatility: can be used indoor and outdoor for a wide assortment of home, automotive, and DIY woodworking applications – such as securing a dryer vent hose, duct work, piping, tubes, large cables and more.
Check Stock

POWERTEC 70127 2-1/2 Inch Key Hose Clamp Thumb Screw Key Adjustable Stainless Steel Hose Clamps for Dust Collectors and Dryer Vent 5PK

  • INCLUDES: 2-1/2” Key Type Hose Clamps – Pack of 5.
  • APPLICATION: Allows you to secure your ductwork hoses and connect dust collection hoses to dust hoods, connectors, 2. 5 inch blast gates, and other dust collection fittings.
  • EASY TURN: Hose clamp allows you to simply use the thumb screw clamp to quickly loosen or tighten it without the use of tools.
  • QUALITY: Delivers a heavy duty, leak proof and corrosion resistant hose clamping tool constructed out of premium grade stainless steel.
  • VERSATILITY: Can be used indoor and outdoor for a wide assortment of home, automotive, and DIY woodworking applications – such as securing a dryer vent hose, duct work, piping, tubes, large cables and more.
Check Stock

POWERTEC 70262 2-1/2 Inch Key Hose Clamp,Thumb Screw Key Adjustable Stainless Steel Hose Clamps for Dust Collectors and Dryer Vent 10 Pack

  • INCLUDES: 2-1/2” Key Type Hose Clamps – Pack of 10.
  • APPLICATION: Allows you to secure your ductwork hoses and connect dust collection hoses to dust hoods, connectors, 2.5 inch blast gates, and other dust collection fittings.
  • EASY TURN: Hose clamp allows you to simply use the thumb screw clamp to quickly loosen or tighten it without the use of tools.
  • QUALITY: Delivers a heavy duty, leak proof and corrosion resistant hose clamping tool constructed out of premium grade stainless steel.
  • VERSATILITY: Can be used indoor and outdoor for a wide assortment of home, automotive, and DIY woodworking applications – such as securing a dryer vent hose, duct work, piping, tubes, large cables and more.
Check Stock

Barb Clamp Rohr Clip - Hose Clamps 10pcs Adjustable Double Wire Water Hose Barb Clamp Pipe Clip Hoop Plumbing Fastener(25mm（21-25）)

  • ...ion with the hose clamp. Steel wire band is more stronger for long time fastening use, Ideal for industrial or home use, help to lessen pressure and protect the hose..
  • 【Functionality】: Ring hose Clamps designed to provide a secure and flexible option for connecting pipes to dust hoods, blast gates and other dust collection fittings.
  • 【MATERIALS】:These hose clamps are made of stainless steel and the surface is plated with zinc. delivers a heavy duty, leak proof and corrosion resistant hose clamping tool Constructed.
Check Stock

POWERTEC 70275 3-Way Dust Collection Fitting w/Y Shaped Design for 4 in Hose & Cuff

  • INCLUDES: (1) 3-Way Junction Dust Collection Fitting.
  • FUNCTION: Allows you to connect up to three individual dust collection tools or machines to one portable dust collector without having an expensive piping system set-up.
  • COMPATIBLE: This 3 way splitter features a y-shaped design with 4” nominal, actual 3-29/32”OD inlet and outlet ports (accepts most 4” ID dust collection hoses and flexible tubing). Please note that a blast gate and/ or hose clamp may be required for direct machine connection (not included).
  • VERSATILE: Works well with most dust collection tools and accessories, including band saws, belt sanders, table saws, jointers, planers and more.
  • QUALITY: This dust collector adapter is made with super durable ABS plastic, known for it’s resistance to scratches, high impact and heat.
Check Stock

Taytools 465388 Set of 6 each 4 OD Blast Gates Self Cleaning No Clog Aluminum for Dust Collection System

  • Designed to fit 4" diameter hose or ducts.
  • Direct air flow to exactly where you need it and maximize dust extraction by opening and closing select ducts.
  • Open slot at back to for self-cleaning, no-clog operation.
  • Cast aluminum, steel sliding gate, locking knob.
Check Stock

DCT 4in Plastic Pipe Threaded Quick Connect Adaptor Coupler 1-Pack, Flexible Hose Woodshop Saw Dust Collection

  • WOODSHOP DUST CONTROL: Use the DCT 4” Inch Plastic Pipe Threaded Quick Connect Adaptor Coupler 1-Pack, Flexible Hose Woodshop Saw Dust Collection to complete your woodshop dust control system by connecting 2 shorter pieces of 4-inch (10.2cm) plastic pipe into one longer pipe for ductwork dust collection.
  • Threaded quick connect adaptor end screws tightly into flexible hose and tapered end offers press-on attachment.
  • HASSLE-FREE: Eliminates the need to connect and disconnect a hose clamp each time a new woodworking machine is used.
  • Takes all of the work out of disconnecting and moving or switching from machine to machine.
  • Stays secure and airtight without sliding off, decreasing airflow, or decreasing dust collection capability.
  • No special adapters for each tool required.
  • EASY TO USE: Designed to quick connect thread onto to the end of a 4-Inch flexible dust collection hose (can be tightened with wire hose clamp.
  • not included) and slide onto any 4-Inch diameter dust hood port, blast gate, the dust collector itself, or the outlet of whichever tool you are using at the time for a quick and easy fit (twist for friction lock).
  • SPECIFICATIONS: Constructed from heavy-duty hard plastic.
  • 1/8-inch (3mm) quick adaptor coupling thickness.
Check Stock

Homax 80099 No-Sag EasyGate Bracket Kit

  • Steel 5/8" J-Bolt Adjustable Barrel hinges provide full range of swing for gates and doors. The length of the threaded arm measures 4.3". Welding plates are 0.25" thick, and the barrels are 1"..
  • These heavy duty hinges are just what you need to hang doors and gates where you require full range of motion. Made of high quality steel with a black powder coating. Comes with all necessary hardware, no need for extra pieces, like springs. These J-hook style hinges are heavy duty, and excellent for gate hinges hardware, door hinges, chain link fence parts, swing gate openers, blast gates, driveway gates, and even as gate latches for metal gates, in general..
  • To Install - Weld the flat backing plate to the mounting post. If not already available, drill a hole through the gate frame big enough for the threaded bolt. Pass the bolt through, and secure with nuts. Hinges must be mounted with the thread arm at the top. If mounted upside down, the gate will fall..
  • Minimum distance between post and gate should be 1.5.
Check Stock

DCT 4in Plastic Pipe Threaded Coupler 1-Pack, Screw-On Flexible Hose Woodshop Woodworking Saw Dust Collection Piping

  • WOODSHOP DUST CONTROL: Use the DCT 4” Inch Plastic Pipe Threaded Coupler 1-Pack, Screw-On Flexible Hose Woodshop Woodworking Saw Dust Collection Piping to complete your woodshop dust control system by connecting 2 shorter pieces of 4-inch (10.2cm) plastic pipe into one longer pipe for ductwork dust collection.
  • Threaded end screws tightly into flexible hose and tapered end offers press-on attachment.
  • Ideal for use with smaller capacity, mobile dust collectors to service multiple machines.
  • HASSLE-FREE: Eliminates the need to connect and disconnect a hose clamp each time a new woodworking machine is used.
  • Takes all of the work out of disconnecting and moving or switching from machine to machine.
  • Stays secure and airtight without sliding off, decreasing airflow, or decreasing dust collection capability.
  • No special adapters for each tool required.
  • EASY TO USE: Designed to thread onto to the end of a 4-Inch flexible dust collection hose (can be tightened with wire hose clamp.
  • not included) and slide onto any 4-Inch diameter dust hood port, blast gate, the dust collector itself, or the outlet of whichever tool you are using at the time for a quick and easy fit (twist for friction lock).
  • SPECIFICATIONS: Constructed from heavy-duty hard plastic.
Check Stock

J bolt gate Hinges Heavy Duty 5/8\ pivot hinge Adjustable Barrel Driveway Pair for welding

  • Steel 5/8" J-Bolt Adjustable Barrel hinges provide full range of swing for gates and doors. The length of the threaded arm measures 4.3". Welding plates are 0.25" thick, and the barrels are 1"..
  • These heavy duty hinges are just what you need to hang doors and gates where you require full range of motion. Made of high quality steel with a black powder coating. Comes with all necessary hardware, no need for extra pieces, like springs. These J-hook style hinges are heavy duty, and excellent for gate hinges hardware, door hinges, chain link fence parts, swing gate openers, blast gates, driveway gates, and even as gate latches for metal gates, in general..
  • To Install - Weld the flat backing plate to the mounting post. If not already available, drill a hole through the gate frame big enough for the threaded bolt. Pass the bolt through, and secure with nuts. Hinges must be mounted with the thread arm at the top. If mounted upside down, the gate will fall..
  • Minimum distance between post and gate should be 1.5.
Check Stock

POWERTEC 70227 6-Inch Blast Gate for Dust Collector Dust Collection Fittings

  • FUNCTION: Maximizes the efficiency of your dust collection system by directing and regulating the air flow from one machine to another.
  • FEATURES: Self-cleaning and clog proof groove design to eliminate constant cleaning maintenance, along with an easy-sliding gate, and locking stop to ensure perfect gate alignment.
  • BUILD: Blastgate flaunts a heavy duty aluminum construction with a premium steel gate designed for eliminating air leakage, project flexibility and long-term usage.
  • The Blast gate Nominal 6” OD openings taper from 5. 83” to 5. 89.
Check Stock