Top Dust Test Chamber

Evike Competition Grade Airsoft Firearm Silicone Lubricant Oil Spray : 200Ml Large Can - (25170)

  • This item cannot be shipped via express / air services.
  • Ideal for many uses including lubricating gears, o-rings, plastic parts, etc.
  • Prevents metal-on-metal wear and corrosion.
  • Proper lubrication solves 90% of common Gas Blow Back problems.
  • The best all-purpose silicone spray on the market!.
  • For AEG & GBB: Spray into magazine bb chamber periodically to prevent dust build-up == For Valves: Spray into gas-in and gas-out valves to check for leakage and to inflate the dried o-ring seal to prevent mag air leaks == Silicon oils are used by technicians all over the world to test gas leakage, o-rings and valves == For Gas Blowback: It is a MUST that you lubricate your gun and keep it oiled for quality performance == There are many internal assemblies that may not work properly when dried.
Check Stock

Forster Products NATO Chamber Headspace Gage, Rimless, Hardened Steel, Precision Ground, 7.62 NATO Maximum

  • 7.62 NATO CHAMBER HEADSPACE GAGE: The proper use of Headspace Gages is the most reliable way to test rifle chamber length. These rimless chambers require a slightly longer maximum headspace than commercial 308 Win calibers. The 7.62 NATO Headspace Gages do not conform to SAAMI tolerances..
  • MAXIMUM LENGTH: The Forster NATO Maximum rifle chamber gage checks to see that the rifle does not have excessive headspace, which could lead to dangerous pressure problems. The NATO Maximum Headspace Gage measures 1.6455″.
  • PRECISION MACHINED: Manufactured from top-quality, hardened steel and precision ground to ANSI and SAAMI tolerances. Headspace tolerance ground to a very exacting ±.00015..
  • QUALITY ASSURED: Each Headspace Gage thoroughly inspected with NIST-certified measurement tools to ensure the highest quality product..
  • MEASURING MEANINGFUL HEADSPACE: Properly speaking, and for safety purposes, one measures “headspace” as the difference between the length of a standard cartridge, as represented by a gage, and the gun’s actual chamber length , when the head of the cartridge is flush against the bolt face..
Check Stock

MartinLogan Motion 60XTi Floorstanding Speaker Red Walnut (Each)

  • High Frequency Transducer: 1.25" × 2.4" (3.2cm × 6.1cm) Folded Motion XT Transducer with 4.5" x 2.75" (11.4cm × 7cm) diaphragm.
  • Mid Frequency Transducer: 6.5” (16.5cm) aluminum cone with cast polymer basket. Sealed chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Low Frequency Transducer: Two 8” (20.3cm) aluminum cone with cast aluminum basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Components: Custom air core coil and low DCR steel laminate inductors. Polypropylene film capacitors in series and low DF electrolytic capacitors in parallel. Tweeter thermal/current protection..
  • Inputs: Custom 5-way bi-wire tool-less binding posts.
Check Stock

MartinLogan Motion 60XTi Floorstanding Speaker Matte White (Each)

  • High Frequency Transducer: 1.25" × 2.4" (3.2cm × 6.1cm) Folded Motion XT Transducer with 4.5" x 2.75" (11.4cm × 7cm) diaphragm.
  • Mid Frequency Transducer: 6.5” (16.5cm) aluminum cone with cast polymer basket. Sealed chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Low Frequency Transducer: Two 8” (20.3cm) aluminum cone with cast aluminum basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Components: Custom air core coil and low DCR steel laminate inductors. Polypropylene film capacitors in series and low DF electrolytic capacitors in parallel. Tweeter thermal/current protection..
  • Inputs: Custom 5-way bi-wire tool-less binding posts.
Check Stock

5\ Tall x 1-5/8\ Wide Kiln Post - 4 Pack

  • Microwave Kiln Glass Fusing DIY Tools Fit For Microwave Kiln Kit Art Work.
  • The microwave kiln is a container kiln consisting of a base and hood made for use in a household microwave oven. The kiln is made of a white insulating fiber and lined on the inside of the chamber with a black compound that absorbs the microwave radiation and heats up to 1650°F.
  • The heat from this compound is then transferred to the chamber and to the piece being fired. It takes between 5 to 10 minutes to reach peak temperature ranges depending on the size of the microwave kiln, the work being fired, and the microwave's wattage. After the firing, the kiln needs to cool for at least 20 minutes before being opened.
  • Designed for working primarily with small glass objects or precious metal clay, the microwave kiln is also suitable for firing small clay pieces, from beads and pendants to test tiles or small sculptural objects.
  • The optimum firing time for various materials and sizes needs to be determined through test firings..
Check Stock

Taylor K-1000 Basic Residential OT DPD Pool & Spa Test Kit 3-Way (3 Pack)

  • Taylor K-1000 Basic Residential Test Kit tests for total chlorine (0.5-5 ppm), bromine (1-10 ppm), and pH (6.8-8.2 ppm).
  • Flip side of the instruction card has dosage charts so you can translate test results into treatment.
  • Pool & spa test kit includes 2-chamber comparator, 0.75 ounces orthotolidine (OT) and 0.75 ounces Phenol Red.
  • Includes enough materials for over 100 tests.
Check Stock

ZVac Replacement Kenmore Style C/Q Micro Filtration Canister Cloth Vacuum Bags Compatible Kenmore 5055, 50557 (Pack of 25)

  • 25 High Quality Total Kenmore Style Canister Cloth Vacuum Bags by ZVac.
  • Designed to fit/Compatible with – Kenmore 5055, 50557, 50562.
  • These bags may appear larger than standard paper bags (aprox 14″ wide x 15″ long) as it is made completely flat with no pleats. However once the bag is mounted on the intake port (inside the dust chamber), simply tuck all the edges of the bag inside to allow the door or hatch to seal completely shut. The bag will then expand to the size of the dust chamber when the vacuum is switched on allowing it to hold more debris than a standard pleated filter bag.
Check Stock

MartinLogan Motion 60XTi Floorstanding Speaker Gloss Black (Each)

  • High Frequency Transducer: 1.25" × 2.4" (3.2cm × 6.1cm) Folded Motion XT Transducer with 4.5" x 2.75" (11.4cm × 7cm) diaphragm.
  • Mid Frequency Transducer: 6.5” (16.5cm) aluminum cone with cast polymer basket. Sealed chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Low Frequency Transducer: Two 8” (20.3cm) aluminum cone with cast aluminum basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Components: Custom air core coil and low DCR steel laminate inductors. Polypropylene film capacitors in series and low DF electrolytic capacitors in parallel. Tweeter thermal/current protection..
  • Inputs: Custom 5-way bi-wire tool-less binding posts.
  • Frequency Response: 35–25,000 Hz ±3dB, Recommended Amplifier Power: 20-400 watts per channel.
  • Horizontal Dispersion: 80°, Vertical Dispersion: 30°, Sensitivity: 94 dB/2.83 volts/meter.
  • Impedance: 4 Ohms Compatible with 4, 6, or 8 Ohm rated amplifiers..
  • Weight: 66 lbs., Dimensions: 48" x 11.4" x 14.4".
Check Stock

5 Gallon Vacuum Chamber,Fencia Heavy Duty 5 Gallon Stainless Steel Vacuum Degassing Chamber Kit w/3 CFM Pump Hose (Shipping from USA)

  • ✔️【WORKING PRINCIPLE 】- Heavy duty vacuum chamber is perfect for removing gases from compounds which have become entrapped in the mixture when mixing components.Vacuum chambers are required to assure a bubble-free mold when mixing resin and silicone rubbers and slower setting resins..
  • ✔️【HEAVY DUTY】- Heat cured silicone gasket is chemically resistant to solvents like butane and does not loose vacuum over time.Hydro-tested stainless steel container is high strength, withstands up to 160ºF.Heavy duty 3/4" shatter resistant acrylic crystal lid allows you to see inside and bulletproof..
  • ✔️【EASY TO USE】- Both the release valve and ball valve are built into a single unit for ease of use, brass fittings fit all vacuum pump ports50 micron air button reduces air flow back into the chamber for purging and prevents dust and debris from entering the chamber..
  • ✔️【CONVENIENT】- 9.4.75" x 4.75" non stick silicone pad allows you to easily remove resin mixes.Max vacuum rated to 29.9inHg at sea level.Our vaccum chamber pairs perfectly with single or dual stage 3 to 9 CFM pumps.Our vacuum chamber greatly reduces gas bubbles and pockets that would weaken the epoxy or silicone.Clear lid allows for you to see air being vacuumed out of your res....
Check Stock

Ficero Chamber Safety Flag for Rifle Handguns Shotgun Pistol, Chamber Flag Includes Built-in Flathead Tool with Bonus DIY Key Chain Tags (Pack of 6)

  • Hard but none scratch polymer composite material, won't leave any sign on your firearms..
  • Chamber flag fits snugly in most common rifle and pistol calibers including 9mm, 22lr, .223, 5.56, .308 and .45 ACP.
  • Well Designed & Bright Color, allowing the breach to close and protect the chamber from dust and debris while still proving safe..
  • Includes built-in flathead tool and a slide-on Picatinny rail adapter for conveniently storing your flag between uses without losing it..
  • Comes with 6 PCS chamber safety flags & 6 PCS key chain tags..
Check Stock

Kodak 3D Printer Portrait, White, 21.1 x 20.7 x 20.7 in

  • Dual extrusion with lifting nozzles: print almost any geometry with accuracy and reliability.
  • Fully enclosed chamber: controlling the printing environment is crucial for print quality and safety.
  • Full connectivity: Wi-Fi, usb stick and a great integration with email, file sharing services and social networks. Operating ambient temperature- 10 - 30 ºC.
  • Although open to using third-party filament, Portrait’s cartridges and enclosed chamber prevent KODAK 3D Printing Filament from absorbing humidity or dust.
  • Automatic calibration and leveling for a seamless 3D printing experience.
Check Stock

BLATN Smart 128s Air Quality Monitor Indoor CO2 PM2.5 TVOC Meter Formaldehyde HCHO Detector VOCs Pollution AQI Tester PM1.0 PM10 Dust Particle Counter Data Logger Home

  • ... 6-channel tiny particle number detection (Number of particles/liter)--PM0.3, PM0.5, PM1.0, PM2.5, PM5.0, PM10.
  • 3-channel particulate matters quality detection (μg/m³)--PM1.0, PM2.5, PM10.
  • 003cb003eCO2 & HCHO SENSOR003c/b003e -- NDIR Non-Spectral Infrared CO2 Carbon Dioxide Sensor with self-calibration, Absorption chamber Optical Coating.
  • Electrochemical formaldehyde HCHO sensor with automatic calibration, double platinum catalytic electrode, strong anti-interference ability.
  • 003cb003eTVOC CHEMICAL POLLUTION003c/b003e -- Semiconductor TVOC meter can test a variety of volatile organic compounds TVOC VOCs, such as benzene, toluene, xylene, aromatic hydrocarbons, aldehydes, hydrogen sulfide etc., captures the change in molecular concentration of organic compounds at the thousandth level.
  • 003cb003eDATA LOGGING UPGTADE003c/b003e -- Smart air quality monitor indoor upgrade in 2021: Support data storage and export of all 12 testing items, with date and time, frequency: once every 1 minute. MAX storage capacity can be expanded to 8G, which can store up to 400 days of records.
  • 003cb003ePROFESSIONAL & ORIGINAL003c/b003e -- air quality alarm base on US standard.
  • stereo air convection sampling and active air interactive syste....
Check Stock