Top Dynamic Focus Laser Engraver

ENJOYWOOD Laser Engraver, Desktop and Handheld 2 in 1 Laser Engraving Machine, Fiber Marking Machine for Metal Plastic Leather, 0.001mm/4K Engraving Accuracy, 0.01mm Compressed Laser spot.

  • 【High Power Laser Engraver Machine】 100W whole machine electrical power, the pulse peak optical power can reach 20000W.Upgraded compressed spot technology.The ultra-fine laser focus area is reduced to 0.02mm in diameter, and the minimum markable character is about 0.06mm*0.15mm (tested with focusing film)..
  •  【Fine Engraving】0.01mm ultra-long and ultra-fine end-pumped infrared laser enables every detail of engraving to be presented, perfectly presenting 4K-level high pixels. Precise positioning,ENJOYWOOD M4 adopts dual-infrared light positioning design, which can accurately locate the marking position without offset..
  • 【Desktop and Handheld 2 in 1 Laser Engraver】 M4 adopts a highly integrated design, and the core components are lightweight, which brings more usage scenarios. It can be hand-held to mark on non-horizontal surfaces, walls, and facades. Start your creation anytime, anywhere..
  • 【Industrial Galvanometer Technology】 M4 marking machine uses 1064nm wavelength infrared light ....
Check Stock

ENJOYWOOD CEL-E10 Laser Engraver, 50W Laser Engraving Cutting Machine,10-15W Laser Output Power Laser Engraving Machine,0.06 * 0.06mm Double Compressed Spot Laser Engraver for Wood and Metal Etc

  • Double Compression Spot Coupling Technology: laser engraver laser power is 10-15W, ultra fine compressed laser spot is reduced to 0.06*0.06mm, Other 10W Machine laser focus area is 0.06*0.08mm. The smaller the laser spot, the greater the energy of the laser. Laser could control laser beam more accurately to 0.01mm. Cutting and engrving more precision..
  • Fast Engraving and Cutting: The laser engraving machine burning Temperature is up to 1200℃. Engraving & cutting speed is 300% higher than that of ordinary models.Engraving speed up to 11,000mm/min.ENJOYWOOD laser engraver with 50mm focal length, Cutting depth increased by more than 20%,Other 10W Machine With 30mm focal length..
  • Vivid Colors Engraving: Power 10-15W optical power can oxidize the metal surface. Oxidized metals exhibit rich colors.By controlling the speed, power and line spacing you can have color laser engraving..
  • The New Filter Panoramic Glass Eye Protection Design: Plays a very good role in protecting your eyes, filtering 97% of the ultraviolet light, you do not need to wear goggles, you can also watch laser engraving. The emergency stop button and reset switch are more convenient and safe to use.Wide Compatibility: LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10, supp....
Check Stock

Laser Engraver,WAINLUX Z3 Portable Laser Engraving Machine 0.05mm High Precision,Auto Fixed Focus Compressed Spot, Foladable Laser Engraver for Wood and Metal,Acrylic,Leather, DIY Engraving

  • 【Upgraded Auto Focus &Lift Design】WAINLUX Z3 Laser engraver support one touch auto focus,it will also projects a preview of your image on the surface before engraving, make your work more efficiently. It is foldable design and no need to install.Your engraving work will not be limited by place and time any more since it is compact and lightweight and portable and can be power supplied via power bank..
  • 【Faster and Higher Accuracy Engraving】Z3 laser engraving machine with 5W laser power and 0.05mm ultra-long and finer infrared laser,the max engraving speed reach 600mm/s, bring you fast and precise engraving experience and making each engraving lifelike.The fixed engraving area is 80mm*80mm.(Note:For metal,Z3 will only work on COATED METAL).
  • 【Bottom Hollow and Rotatable Design】 Using Z3 to get more carving modes. Both of the flat and convex side of the movable board can be placed according to your needs for carving and cutting. With unique rotatable design,Z3’s rotatable Design allows you to engrave any bevel within 180°. You can also place the Z3 directly on top of large objects for accurate marking break the height and area limitations..
Check Stock

Comgrow Z1 Laser Engraver 10W Output Power, 24V Desktop 48W Laser Cutter and Engraving Machine with Eye Protection Compressed Laser Spot 0.08mm, 10000mm/min Diode Laser Cutting for Metal Wood

  • 【DUAL Y-AXIS MOTOR】: The Y-axis of acrylic engraving machine is extremely smooth and extremely mobile. Not only provides almost unbelievable speed when engraving but also increases the stability and accuracy of the project..
  • 【Extensive software adaptability & Multiple connection methods】:Z1 laser engraver can be compatible with various mature engraving software, LightBurn for experirenced laser user and LaserGRBL for new laser user. LaserGRBL Support Win 7 / Win 8/ Win 10/Win XP,LightBurn supports window /Mac /Linux system.And you can transfer data via Wi-Fi, USB cable, and SD card and use Z1 laser cutter and engraver machine anytime and anywhere..
  • 【SUPPORT EXPANSION】: This device It can be upgraded with Comgrow rotary roller, perfect for engraving tumblers and cylindrical objects! It has a stable design for multiple diameters. Spacing between the two rotary axes ranges from 8mm(0.31in) to 86mm(3.9in). You can engrave angthing you want..
  • 【quality assurance & Easy to use】The Z1 laser engraver can usually be assembled in 10-20 minutes. The new laser head comes with a focusing plate, allowing you to quickly and easily adjust the focus without any tools. In addition, we provide customers with one-year free parts replacement ....
Check Stock

Aufero Portable Laser Engraver, Mini Laser Cutter and Engraver Machine for Wood and Metal, 32-bit Motherboard LaserGRBL(LightBurn), Eye Protection Fixed-Focus, 7.1'' x 7.1'' DIY Engraving Area(LU2-2)

  • Pre-assembled Package: The Aufero 1 portable laser engraver comes pretty much assembled.
  • simply insert the laser head into its holding bracket and connect the two wires and it is going to work right out of the box.
  • perfect entry-level laser engraver for the beginners and hobbyists.
  • Advanced Firmware: Adopting advanced motherboard (32-bit MCU) for fast and precise engraving.
  • processes 32 instructions and supports up to 921600 baud rate.
  • LU2-2 fixed focus laser module has a luminous power of 1,000-1,600mw and 0.07x0.06mm focal spot, perfect for engraving high precision patterns.
  • Broad Compatibility: The Aufero 1 laser engraver works with mature engraving software-LaserGRBL(free), LightBurn(paid).
  • supports Win XP / Win 7 / Win 8 / Win 10, Mac and Linux systems.
  • supports BMP, JPG, PNG, JPEG, SVG file types.
  • works on food, MDF, paperboard, plywood, black acrylic, leather, powder-coated metal, stone, etc.
  • 4 Safety Protection: Built with 4 protections: active position protection, exposure duration detection and limitation, laser beam safety guard and current safety control system.
  • full safety protection allows you to hook on your project without any worry.
  • Dual Eye Protection: The Aufero 1 laser engraving machine features a protective cover that effectively fil....
Check Stock

Atomstack A5 pro Laser Cutter and Engraver Machine by UESUIKA, 40w Diode Laser Engraving Machine, 5-5.5W Optical Power, Easy Assembly, Eye Protection Fixed Focus Compressed Spot

  • 【Get a free Laser Engraving and Cutting Materials】 Please click the "Promotion Available" button ,then click "Add both to Cart".
  • you will get a free Laser Engraving and Cutting Materials as you order Atomstack A5 pro laser cutter.
  • 【Reason for Choice】The A5 pro laser engraver has a large engraving range of 15.74 x 16.1inch. 5.5W Optical output power of laser. Fixed Focus Compressed Spot, higher accuracy, and more refined engraving products. It can not only engrave but also cut 1/5" of the wood and acrylic..
  • 【Create Your Own Logo】The A5 pro 40W laser engraver for home can meet your daily needs. It can engrave on wood, bamboo, paper, plastic, leather, PCB board, aluminum oxide, non-reflective plating and lacquered metal, ceramics. You can engrave your own logo for your favorite items..
  • 【Assembly is quite easy】Everything is neatly packaged and the smaller pieces are pre-separated into steps that match the instructions.Each assembly step has its own separate package of fittings used in that step. all parts are marked with steps no there is no confusions. The entire setup was about 30 minutes..
  • 【Perfectly compatible system】The laser engraving machine can be compatible with LaserGRBL (free, support Windows) or LightBurn (paid, support Window....
Check Stock

Atomstack A5 M50 pro Laser Cutter and Engraver Machine by UESUIKA, 5-5.5W Optical Power, Diode 40w Laser Engraving Machine with Independent Control Terminal, Quadruple Lens Compression Fixed Focus

  • 【Get a free Laser Engraving and Cutting Materials】 Please click the "Promotion Available" button ,then click "Add both to Cart".
  • you will get a free Laser Engraving and Cutting Materials as you order Atomstack A5 M50 pro laser cutter.
  • 【Quadruple Lens Double Compression Spot】The A5 M50 pro laser cutter and engraver machine has quadruple lens compression Technology. 5-5.5W Optical Power. Fixed Focus Compressed Spot, spot smaller and the energy more concentrated, and more refined engraving products. It can not only engrave but also cut 0.8" of the wood and 0.6“ acrylic..
  • 【Support offline engraving】The A5 M50 pro 40W laser engraver is equipped with a terminal control panel, which supports offline engraving, so that you can engrave anywhere, anytime without the restriction of a computer..
  • 【Perfectly compatible system】A5 M50 pro laser engraving machine can be compatible with LaserGRBL or LightBurn. You can also use the Atomstack APP to control it on your phone..
  • 【Assembly is quite easy】Everything is neatly packaged and the smaller pieces are pre-separated into steps that match the instructions.Each assembly step has its own separate package of fittings used in that step. all parts are marked with steps no there is no confusions. The ....
Check Stock

WIZMAKER L1 Laser Engraver, 20W Output Power Laser Cutter, High Accuracy Laser Engraving Machine, 120W Laser Cutting Machine with Air Assist, Lazer Engraver for Wood and Metal, Acrylic, Leather

  • 【Faster Speed & High Accuracy】 Upgraded 20-24W Laser module and 32 bit motherboard support faster cutting and engraving speed. Ultra-fine laser focus is reduced to 0.06 x 0.06mm, provide you a higher accuracy engraving artwork. WIZMAKER laser engraver can cut 10-12mm paulownia wood and 8-10mm acrylic in one pass, and up to 20mm wood, 15mm acrylic, 0.05mm metal steel. Also can directly engrave metal, ceramics, glass, the engraving and cutting speed is 40% higher than the ordinary model..
  • 【Solid & Easy to Install】 The sturdy and easy installation all-aluminum alloy anodized structure, and all-metal wheel, shaft, and enclosed synchronous belt makes the laser module still ensure motion stability under high-speed up to 400mm/s, improves the accuracy of engraving. And the entire structure of laser cutter has been designed for quick assembly, and the assembly can generally be completed within 10-25 minutes..
  • 【Safe & Longer Service Life】 The red emergency button on the laser engraving machine allows you to stop the operation at any unexpected situations. The laser eye shield on laser module can effectively filter 97% of UV rays, effectively protectin....
Check Stock

ATOMSTACK Laser Engraver S10 Pro 10W Output Power 0.08 * 0.06mm Compressed Spot Engraving Cutting Machine Eye Protection Fixed-focus Air Assist Kits DIY CNC Machine for Engraving and Cutting

  • Dual Compression Spot Technology: ATOMSTACK S10 Pro laser engraver with 50W machine power and 10W laser output power, ultra-fine laser focus area is....
  • Support Offline Engraving: S10 PRO laser engraving machine configures the terminal control panel, supports offline engraving and with emergency stop....
  • High-Performance Fixed-Focus Laser: No need to adjust the focus before engraving.
  • The focal spot area of the new laser is only 1/3 of the spot area of....
  • New Filter Panoramic Glass Eye Protection Design: S10 laser engraving with newest panoramic filter glass protective cover plays a very good role in....
  • Compatible With: Newest ATOMSTACK S10 Pro engraving machine compatible with various mature engraving software, such as LaserGRBL(Free), LightBurn(may....
Check Stock

ATOMSTACK S20 PRO Laser Engraver,130W Laser Engraving Cutting Machine Air Assist Kits, 20W Output Power 0.08 * 0.1mm Compressed Spot, Laser Cutter and Engraver Machine Metal Steel Golden Gray

  • ... the newest generation of four 6W laser coupling technology to produce the output power soars to 20W. It can cut 15mm thick tung wood board and 8mm thick black acrylic board at one pass and easily cut more than 40 kinds of materials such as 0.05mm thick stainless steel board..
  • More Precise Engraving: ATOMSTACK laser engraver with a 32-bit motherboard works more smoothly and stable. The advanced built-in 256-bit color scale with 0.08 * 0.1mm laser spot area MAKEs the engraved pattern more contrast and more obvious. The finished pattern is like sketching on paper. the effect is more deliCATe and natural in the overlay of black and white..
  • More IntelLIGEnt Engraving: We have developed an ATOMSTACK APP to connect to the S20 pro laser engraving machine, supporting Android and Apple mobile phone systems. At the same time, It is equipped with a controller and emergency stop button, so that completely offline engraving can be achieved. You can do your engraving work smoothly and safely even without network environment or computer..
  • More Clean Engraving: The S20 PRO laser engraver is equipped with an upgraded F30 pro air assist kit, which have dual built-in air-assist pumps. It MAKEs it twice as efficient as other air assist units. The air assist kit keeps the s....
Check Stock

Longer RAY5 Laser Engraver 130W, Higher Accuracy Laser Engraver 20W Output Power, 3.5"Touch Screen APP Offline Control, DIY Engraver Tool for Metal/Glass/Wood, Cutting Area 14.7"x14.7"

  • ...ce the cutting capacity of this machine. It can cut 0.59"/15mm pine wood and 0.31"/8mm acrylic in one pass, 25mm wood and 35mm acrylic multiple passes, and cut 0.002"/0.05mm stainless steel..
  • 【More detailed and Multi-Color Engraving】Longer RAY5 20W laser engraver with a newly upgraded 32 bits chipsets motherboard works more smoothly and stable. The advanced built-in 256-bit color scale with 0.08 * 0.1mm ultra-fine laser focus area achieves a finer engraving result and a higher contrast effect. And an air-assisted interface is reserved, which can be easily matched with various air pumps, and more clean surfaces..
  • 【3.5" color Touchscreen & 4 Connection Methods】The Longer RAY5 laser cutter has a built-in 3.5-inch color touchscreen with a user-friendly interface. You can directly operate the machine through the touchscreen, such as checking the engraving progress, adjusting the engraving speed, or other operations. Particularly totally User-Friendly Laser Engraver, this laser engraver has 4 connection modes: ①SD Card Connection ②USB Connection ③APP Connection ④Wi-Fi Connection.
Check Stock

ATOMSTACK S20 PRO Laser Engraver with R3 Pro Rotary Roller Kits, 130W Laser Engraving Cutting Machine with Air Assist Kits, 20W Output Power 0.08 * 0.1mm Compressed Spot for Metal Steel

  • ... the newest generation of four 6W laser coupling technology to produce the output power soars to 20W. It can cut 15mm thick tung wood board and 8mm thick black acrylic board at one pass and easily cut more than 40 kinds of materials such as 0.05mm thick stainless steel board..
  • More Precise Engraving: Atomstack laser engraver with a 32-bit motherboard works more smoothly and stable. The advanced built-in 256-bit color scale with 0.08 * 0.1mm laser spot area makes the engraved pattern more contrast and more obvious. The finished pattern is like sketching on paper. the effect is more delicate and natural in the overlay of black and white..
  • More Intelligent Engraving: We have developed an ATOMSTACK APP to connect to the S20 pro laser engraving machine, supporting Android and Apple mobile phone systems. At the same time, It is equipped with a controller and emergency stop button, so that completely offline engraving can be achieved. You can do your engraving work smoothly and safely even without network environment or computer..
  • More Clean Engraving: The S20 PRO laser engraver is equipped with an upgraded F30 pro air assist kit, which have dual built-in air-assist pumps. It makes it twice as efficient as other air assist units. The air assist kit keeps the s....
Check Stock