Top Dynamic Signal Analyzer

35?4400MHz Portable Spectrum Analyzer,3.5 ”TFT Handheld Frequency Analyzer Amplitude Bandwidth Frequency Signal Generator,Tracking Generator Steps Sweep Signal Generator (PLZ-SA354400A 3.5inch LCD)

  • [ Accurately Track ] This portable spectrum analyzer 35‑4400MHz Equipped with a tracking source TG, the frequency of the signal output by the tracking source can accurately track the tuning frequency of the spectrum analyzer..
  • [Output Range]35MHz‑4.4GHz signal source output range, can display and analyze a simple spectrum.The input dBm scope is -80dBm~0dBm, output dBm is 0dBm..
  • [4 Major Modes ]Four major modes: Network mode, Spectrum mode, Point frequency mode, Sweep mode. After power on, the default mode is Network mode..
  • [3.5 Inch Touch Display ] Touch function, without button operation, you can directly click on the touch screen to operate..
  • [Portable ] Handheld spectrum analyzer Easy to carry and tiny , powered by USB-C cable,it can be easily hand‑held for measurement or carried to various places.Made of aluminum alloy material, wear resistance and can provide long service time..
Check Stock

Vibrometer Digital Split Type Vibration Meter LCD Displays Acceleration Sensor Gauge Handheld Vibration Analyzer Grey

  • TWO TEMPERATURE UNITS: It can measure the environment temperature with 2 temperature units (℃ and ℉), temperature measurement 0℃ - 60℃, temperature accuracy is ±2℃.
  • MEASURING RANGE: Digital vibration tester has wide measurement range of acceleration: 0.1~199.9m/s2 peak, vibration acquisition is piezoceramic accelerometer.
  • FUNCTION: Vibration gauge analyzer adopts piezoelectric acceleration transducer transfer the vibration signal in to electrical signal, analyze the input signals, and show the vibration speed, acceleration, displacement, can meet your different using need.
  • LCD DISPLAY: Vibrometer gauge LCD displays measurement result and conditions directly, three and a half digit display, clear display for easy reading.
  • APPLICATION: Vibration analyzer tester is widely used in mechanical manufacturing, electric power, chemical engineering, space flight and aviation and other fields.
Check Stock

Satlink WS6966 Satellite Finder Meter MPEG4 DVB-S2 Meter Satlink WS-6966 HD Satellite Finder

  • WS-6966 Support formal international standard video and audio encoding.
  • Satlink WS-6966 Satellite Finder Meter has 4.3 Inch High Definition TFT LCD Screen.
  • Support DISEQC 1.0,1.1,1.2 and 22khz Tone.
  • Software upgrade via USB port. Easy to carry..
  • Measurement Type: signal strength,quality, BER, S/N,PWR, MER.
  • Sound and Light Alarm for Locking Signal.
Check Stock

RF Explorer Digital Handheld Spectrum Analyzer 6G Combo Plus - Slim

  • ...trength and the high quality baked varnished paint provides a unique glossy finish. The device is designed and manufactured to last many years of demanding usage in the field, with internal rechargeable Lithium battery for hours of continuous usage..
  • [Advanced features] – Included advanced high-resolution Spectrum Analyzer mode, WiFi Analyzer mode, Tracking SNA. Internal firmware is continuously updated with additional features and functions to improve the device capabilities..
  • [Free Computer software] - When connected to a Windows, Linux or Mac computer the analyzer can display advanced high resolution graphics, including Power Meter and Spectrum Analyzer real time charts, historical charts, save data to CSV files and export to other tools such as WW6 or MatLab, define markers and limit lines and much more. Free open source API and libraries are available to customize your own applications and services..
  • [Tracking mode enabled] – When combined with RF Explorer Signal Generator the analyzer can perform full tracking SNA to define Gain, Attenuation and SWR for 1 and 2 port RF devices such as filters, amplifiers and antennas..
Check Stock

SDRGEEK TinySA Handheld Tiny Spectrum Analyzer 2.8 Inch Touching Display 100KHz-960MHz Screen Spectrum Analyzers Signal Generator with Battery

  • 【With Two Inputs】Spectrum analyzer with two inputs, fine quality MF/HF/VHF input for 0.1MHz-350MHz, lesser quality UHF input for 240MHz-960MHz. Switchable resolution bandpass filters for both ranges between 2.6KHz and 640KHz..
  • 【MF/HF/VHF Input】Input step attenuator from 0dB to 31dB for the MF/HF/VHF input. Color display showing 290 scan points covering up to the full low or high frequency range..
  • 【Portable and Convenient】Rechargeable battery allowing a minimum of at least 2 hours portable use. Connected to a PC via USB it becomes a PC controlled spectrum analyzer..
  • 【Wide Application】When not used as spectrum analyzer it can be used as signal generator, MF/HF/VHF sinus output between 0.1MHz-350MHz, UHF square wave output between 240MHz-960MHz..
  • 【Package Included】1 * Spectrum Analyzer.
Check Stock

USB Logic Analyzer Device with USB Cable 5MHz 24MHz 8CH 8 Channel UART IIC SPI Debug Logic Analyzer Professional Microcontroller Device Network Analyzing Set for Ardu-ino FPGA ARM M100 SCM

  • Logic analyzer is a waveform test device similar to an oscilloscope. It collects specified signals and displays them to developers through graphics or data statistics. Developers use these graphical timing signals to analyze hardware or software errors in accordance with the protocol..
  • Logic analyzer is an indispensable device in design. It can quickly locate errors, find and solve problems, especially when analyzing timing, such as 1wire, I2C, UART, SPI, CAN and other data, the application of logic analyzer to solve problems is very fast..
  • Plug the DuPont cables into the logic analyzer interface one by one. After the DuPont cables are inserted, they will be divided into 2 rows. The upper row of 5 logic analyzers corresponds to the silk screen on the left side of the shell, and the bottom one row corresponds to the silk screen on the right. Before testing the signal, please connect the GND channel of the logic analyzer to the GND pin of the board, otherwise the measured data will be unreliable..
  • If the logic analyzer works at 24M, the USB device must not only provide a 24M communication rate, but also must ensure that other devices occupy USB resources before the 4 buffers are filled. For these reasons, the logic analyzer cannot always work at the sampl....
Check Stock

2023 AURSINC Ultra TinySA 4” Spectrum Analyzer – Portable V0.4.5.1 100kHz-5.3GHz Frequency Analyzer | Built-in 3000mAh Battery & 32GB SD Card | RBW LNA DANL Phase Noise RF Signal Generator

  • 2023 NEWEST TINYSA: Produced by Hugen, AURSINC ULTRA Tinysa owns high performance frequency in 100khz to 800MHz, and when in ultra mode, the analyzer can reach 5.3GHz. With new 4” touchscreen display and installed with the latest hardware system V0.4.5.1. tinysa is more professional, stable, sensitive and easy to be operated.
  • A Lab-grade Spectrum Analyzer: The ultra-wide range frequency can reach around 6GHz, together with the excellence of phase noise [email protected], DANL -166dBm/Hz.
  • In Ultra mode the input low pass filter is automatically enabled for all frequencies within the pass-band of the low pass filter (up to 750MHz). For higher frequencies the low pass filter will be bypassed and the measurement will be slower due to the multiple measurements per frequency required for the mirror and spur elimination algorithm.
  • Differences to the Former TinySa: The first big one is that now the default maximum frequency is 800mhz, so you no longer have to switch between low and high range,and can monitor the complete range in one sweep.
  • Second,In the level menu, there is the LNA, which will provide 20db of extra gain if you have very low level signal.
  • Lastly, RBW frequency from 200hz to 850khz which can be set to match the measurement requirements, meet ....
Check Stock

SATLINK ST-6986 Satellite TV Receiver DVB-S/S2/T/T2/C Combo Meter MPEG-4 HD H.265 (10bits) Spectrum Spectrum Analyzer Digital Satellite Finder Meter

  • ST-6986 is a DVB-S/S2X/T/T2/C and MPEG-2, H.264/AVC,H.265/HEVC (10 Bit) compliant handheld combo meter. With is compact size, light weight, intuitive user's interface, long battery operational hours and rich feature set, the meter provides all functions needed for installation and verification of digital Satellite TV service, attenna signal and cable signal to residential homes or multi-dwelling units. ST-6986 can only support 1080P and cannot support 4K..
  • 7 Inch High Definition TFT LCD Screen(1024*600) .Fully DVB-S/S2/S2X,T/T2/C, MPEG-2/MPEG-4 compliant,MPEG-2 / H.264/H.265 (10 Bit) Hardware decod-ing..
  • Supports Constellation analyzer. Supports Spectrum analyzer. Supports scan of Auto Blind, Manual ,NIT.Supports and Light Alarm for Locking Signal.
  • Supports DISEQC 1.0/1.1/1.2 ,Unicable, 0/22khz Tone.
  • Speaker Integrated. Stereo pairs of speakers.
Check Stock

Steave Meade Designs SMD DD-1 Distortion Detector

  • Distortion detector's circuitry is 100% analog.
  • Distortion detection trigger level > 1.0% harmonic distortion.
  • Operating range of input signal is 1.2 vrms a" 125 vrms, (15, 000 watts at 1 ohm).
  • Signal present LED trigger voltage 750 mvrms.
Check Stock

Steve Meade Designs SMD DD-1 Distortion Detector

  • Distortion detector's circuitry is 100% analog.
  • Distortion detection trigger level > 1.0% harmonic distortion.
  • Operating range of input signal is 1.2 vrms a" 125 vrms, (15, 000 watts at 1 ohm).
  • Signal present LED trigger voltage 750 mvrms.
Check Stock

Satellite finder Signal Finder, VISLONE HD Satellite TV Signal Finder ST-5150 DVB-S2/T2/C COMBO Digital Handheld Signal Meter Satellite Finder H.265 HEVC MPEG-4 4.3 Inch TFT LCD US Plug

  • WS-6980 is a DVB-S/S2/T/T2/C and MPEG-2/4 H.264/h.265 (Just support 8 Bit, not suppport 10 Bit) compliant handheld combo meter. With its compact size, light weight, intuitive user's interface, long battery operational hours and rich feature set, the meter provides all functions needed for installation and verification of digital Satellite TV service, antenna signal and cable signal to residential homes or multi-dwelling unit. Currently, WS-6980 can only support 1080P and cannot support 4K..
  • 7 Inch High Definition TFT LCD Screen(1024*600) .Fully DVB-S/S2,T/T2/C, MPEG-2/MPEG－4 compliant, MPEG-2 / MPEG－4 H.264 Hardware decoding..
  • Supports scan of Auto, Manual ,NIT(DVB-S/S2).
  • Supports DISEQC 1.0/1.1/1.2 ,0/22khz Tone.
  • Independent battery charging power. Software upgrade via USB port,..
Check Stock

NanoVNA 10KHz-1.5Ghz Vector Network Analyzer, Fit V3.4 HF VHF UHF，JUNSHUNTONG Voltage Standing Wave Ratio, Mini Antenna Analyzer Measuring S Parameters，Phase，SWR Meter，Smith Chart

  • 【Tiny DIY Product】 This Nanovna antenna analyzer is a DIY product, in the size of the credit card size as far as possible to provide perfect vector network measurement function. It contains a 2.8-inch touch screen, 450mah battery, which can be used offline for 3 hours..
  • 【Accurate,Portable and Easy to handle】 This tiny vector network analyzer is a truly handheld and measurement licensed microwave band, and consists of original equipment, which is dedicated to its own frequency range and reasonable price..
  • 【Fit 10KHz-1.5GHz Frequency 】 Battery powered spectrum compact equipment does not need an external down converter or connection with a PC. It is a necessary tool for any field engineer to perform microwave equipment installation, link troubleshooting, site planning and maintenance in the field environment..
  • 【Metal Shield】The metal shield is designed to reduce external interference and improve the measurement accuracy. Its frequency algorithm can be extended to 900MHz with the odd harmonics of si5351. The direct output 50k-300mhz band can provide better than 70dB dynamic, the expanded 300m-600mhz band can provide better than 50dB dynamic, and the 600m-900m band can provide better than 40dB dynamic..
  • 【Note】 Free software is available wh....
Check Stock