Top Earth friendly Filament Spool

SUNLU ASA Filament 1.75mm UV/Rain/Heat Resistant Tough 3D Printer Filament Great for Printing Outdoor Functional Mechanical Parts 1kg Spool 2.2lbs 395 Meters Red

  • ① 【SUNLU ASA 3D Filament】ASA filament is kind of very strong and tough filament, stronger than PLA filament and ABS filament. No clog, no....
  • ②【Super Neat Filament Spool】Spool Diameter: 8.00", Spool Width: 2.50", Spool Hub Hole Diameter: 2.20". The size of the SUNLU filament spool is....
  • ③【1.75mm Filament Diameter】Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, it's suitable....
  • ④【Recommend Settings】We recommend printing at a nozzle temperature of 230-260°C(446-500°F), bed temperature of 80-120°C(176-248°F), printing....
  • ⑤【UV/Rain/Heat Resistant】SUNLU ASA 3D printing filament is great for printing outdoor functional mechanical parts, UV/Rain/Heat highly....
Check Stock

Inland Tough PLA 3D Printer Filament 1.75 mm – Tougher Than PLA+ - Dimensional Accuracy +/- 0.03 mm - 1 kg Spool (2.2 lbs) – High Impact Strength- Black

  • TOUGH PLA FILAMENT PRINT SETTINGS: 1 KG (approximately 2.20 lbs) Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm) Recommended Extrusion/Nozzle Temperature: 210 °C - 230 °C (410 °F - 446 °F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • INLAND TOUGH PLA FILAMENT: Designed with the highest quality and compatibility in mind, Inland Tough PLA Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dried and vacuum sealed with desiccant to ensure a high-quality smooth print..
  • EASY-TO-USE: Inland Tough PLA filament is as easy to use as regular PLA, but has higher impact resistance. Tough PLA is engineered for strength and durability and is often compared to ABS for its mechanical characteristics. Produce your best print with our no-clog, bubble-free durable Tough PLA. The Inland filament can be used with most FDM and FFF 3D Printers..
  • HIGH-QUALITY TOUGH PLA: The Tough PLA is non-toxic and tightly wound on its cardboard spool. To keep your filament tangle free do not let go of the filament on the spool! Alwa....
Check Stock

NovaMaker PLA 3D Printer Filament, Silver PLA Filament 1.75m, PLA 1kg Spool(2.2lbs), Dimensional Accuracy +/- 0.03mm

  • ✅【Risk-Free Service】One-month free trial, Lifetime Quality Promise and Money Return Service if you’re not entirely satisfied. Professional printing advice from technique support team make sure your prints SMOOTH & STABLE with excellent adhesion..
  • ✅【Best Quality PLA Filament】Made by USA virgin PLA material with best performance and Eco-friendly, Clog-Free, Bubble-Free & Easy-to-use. Ensure Diameter 1.75mm + / - 0.03 mm..
  • ✅【Tangle-Free Tips】1KG Silver PLA Filament dried 24 hours before packaging and vacuum sealed with nylon bag. To Avoid being Tangled, Filament should be fix into Spool Holes after Every Time Use..
  • ✅【Printing Tips】Recommended Printing Temperature 190°C - 220°C, Bed 30°C - 60°C. PLA Spool Diameter: 7.8" - Spool Width: 2.6" - Spool Hub Hole Diameter: 2.1"..
  • ✅【Cost-effective & Wide Compatibility】Manufacturer NovaMaker has over 8years 3D filament R&D experiences, and produce all kinds of filaments in large scale with premium quality, which contribute to 3d filament cost-effective and reliable for all common 1.75mm FDM 3D printers, such as Creality, MK3, Ender3, Prusa, Monoprice, FlashForge etc..
Check Stock

SUNLU ABS Filament 1.75mm Black Bundle of 5kg ABS 3D Printer Filament Dimensional Accuracy +/- 0.02 mm,1KG per Spool Total 5 KGs/5 Spools

  • 【1.75mm Filament Diameter】Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, it's suitable....
  • 【Filament Spool Diameter】Spool Diameter: 8.00", Spool Width: 2.50", Spool Hub Hole Diameter: 2.20". The size of the SUNLU filament spool is....
  • 【PETG Filament Advantages】SUNLU PETG strong filament has many advantages: Clog Free, Bubble Free, Tangle Free, Warping Free, Stringing Free, Easy....
  • 【Combining PLA and ABS】SUNLU PETG filament combines the advantages of both PLA 3D printer filament and ABS 3D printer filament, ease to use like....
  • 【Recommend Settings】We recommend printing at a Nozzle/Extrusion temperature of 235°C - 245°C (455°F - 473°F) and Bed/Platform temperature of....
Check Stock

NovaMaker PETG 3D Printer Filament 1.75 - Black 1.75mm PETG Filament, PETG 1kg Spool(2.2lbs), Dimensional Accuracy +/- 0.03mm.

  • ✅【Risk-Free Service】One-month free trial, Lifetime Quality Promise and Money Return Service if you’re not entirely satisfied. Professional printing advice from technique support team make sure your prints SMOOTH & STABLE with excellent adhesion..
  • ✅【Best Quality PETG Filament】Made by USA virgin PETG material with best performance and Eco-friendly, Clog-Free, Bubble-Free & Easy-to-use. Ensure Diameter 1.75mm + / - 0.02 mm..
  • ✅【Tangle-Free Tips】Black PETG Filament dried 24 hours before packaging and vacuum sealed with desiccants in nylon bag. To Avoid being Tangled, Filament should be fix into Spool Holes after Every Time Use..
  • ✅【Printing Tips】Recommended Prting Temperature 230°C - 250°C, Bed 70°C - 80°C. PETG Spool Diameter: 7.8" - Spool Width: 2.6" - Spool Hub Hole Diameter: 2.1"..
  • ✅【Cost-effective & Wide Compatibility】Manufacturer NovaMaker has over 8years 3D filament R&D experiences, and produce all kinds of filaments in large scale with premium quality, which contribute to 3d filament cost-effective and reliable for all common 1.75mm FDM 3D printers, such as Creality, MK3, Ender3, Prusa, Monoprice, FlashForge etc..
Check Stock

NovaMaker PETG 3D Printer Filament 1.75, Clear PETG Filament 1.75mm, Transparent PETG 1kg(2.2lbs), Dimensional Accuracy +/- 0.03mm

  • ✅【Risk-Free Service】One-month free trial, Lifetime Quality Promise and Money Return Service if you’re not entirely satisfied. Professional printing advice from technique support team make sure your prints SMOOTH & STABLE with excellent adhesion..
  • ✅【Best Quality PETG Filament】Made by USA virgin PETG material with best performance and Eco-friendly, Clog-Free, Bubble-Free & Easy-to-use. Ensure Diameter 1.75mm + / - 0.02 mm..
  • ✅【Tangle-Free Tips】Clear PETG Filament dried 24 hours before packaging and vacuum sealed with desiccants in nylon bag. To Avoid being Tangled, Filament should be fix into Spool Holes after Every Time Use..
  • ✅【Printing Tips】Recommended Prting Temperature 230°C - 250°C, Bed 70°C - 80°C. PETG Spool Diameter: 7.8" - Spool Width: 2.6" - Spool Hub Hole Diameter: 2.1"..
  • ✅【Cost-effective & Wide Compatibility】Manufacturer NovaMaker has over 8years 3D filament R&D experiences, and produce all kinds of filaments in large scale with premium quality, which contribute to 3d filament cost-effective and reliable for all common 1.75mm FDM 3D printers, such as Creality, MK3, Ender3, Prusa, Monoprice, FlashForge etc..
Check Stock

Inland Glass PLA 3D Printer Filament 1.75mm - Dimensional Accuracy +/- 0.03 mm - 1 kg Spool (2.2 lbs) – Fits Most FDM/FFF Printers – Transparent Glass Filaments, Yellow Glass

  • GLASS PLA FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • GLASS FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 190°C - 210°C (374°F - 410°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • INLAND GLASS PLA FILAMENT: Designed with the highest quality and compatibility in mind, Inland Glass PLA Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dried and vacuum sealed with desiccant to ensure a high-quality smooth print..
  • EASY-TO-USE: The Inland Glass PLA filament melts evenly and feeds smoothly into your 3D Printer creating defined corners with minimal warping and no odor. Produce your best print with our no-clog, bubble-free filaments. Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle free do not let go of the filament on the spool! Always hold the spool and filament tightly, do not allow your filament to spring back..
  • HIGH-QUALITY GLASS PLA: Glass PLA filament is non-toxic, the mater....
Check Stock

SUNLU Carbon Fiber PLA Filament 1kg 1.75mm 3D Printer Filament, Dimensional Accuracy +/- 0.02 mm, 1kg Spool, 1.75 mm

  • 【SUNLU Material】 Carbon fiber Polycarbonate - Color: Black - Weight: 1kg (approximately 2.20lbs)/Spool.
  • 【SUNLU 3D Filament Size】 1.75mm (Tolerance Level : +/- 0.02mm) - Spool Diameter: 7.87" - Spool Width: 2.83" - Spool Hub Hole Diameter: 2.20".
  • 【Recommended Printing Temp/Nozzle Temperature】 190-230°C (374-446°F), Base Plate Temperature: 60-80°C(140-176°F).
  • 【Performance Advantages】 SUNLU Carbon fiber PLA filament has perfect dimensional stability for warp free printing, excellent layer adhesion, and easy support removal.
  • 【100% Environmental Friendly】 Carbon Fiber filament 100% Biodegradable, ultimately generates carbon dioxide and water without polluting the environment. Comply with the Restriction of Hazardous Substance (RoHS) directive and are free from potentially hazardous substances..
Check Stock

Inland Shiny Silk Copper 1.75mm PLA 3D Printer Filament - Dimensional Accuracy +/- 0.05 mm - 1 kg Spool (2.2 lbs), 1.75 mm – Fits Most FDM/FFF Printers – Clog Free Colorful Filaments

  • SILK PLA FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) Recommended Extrusion/Nozzle Temperature: 190°C - 230°C (374°F - 446°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • HIGH-SHINE SILK PLA:  This glossy material has a bright, silky luster that will bring your colorful creations to life. Silk filament is perfect for your large curved surface models or practical models that you want to shine..
  • HIGH-QUALITY SILK FILAMENT: Designed with the highest quality and compatibility in mind, Inland Silk PLA Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dry and vacuum sealed with desiccant to ensure a high-quality shiny print..
  • EASY-TO-USE: The Inland Silk PLA filament melts evenly and feeds smoothly into your 3D Printer creating defined corners with minimal warping and no odor. Produce your best print with our no-clog, bubble-free filaments. Inland filament is compatible with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle-free do no....
Check Stock

Inland Shiny Silk Orange 1.75mm PLA 3D Printer Filament - Dimensional Accuracy +/- 0.05 mm - 1 kg Spool (2.2 lbs), 1.75 mm – Fits Most FDM/FFF Printers – Clog Free Colorful Filaments

  • SILK PLA FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) Recommended Extrusion/Nozzle Temperature: 190°C - 230°C (374°F - 446°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • HIGH-SHINE SILK PLA:  This glossy material has a bright, silky luster that will bring your colorful creations to life. Silk filament is perfect for your large curved surface models or practical models that you want to shine..
  • HIGH-QUALITY SILK FILAMENT: Designed with the highest quality and compatibility in mind, Inland Silk PLA Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dry and vacuum sealed with desiccant to ensure a high-quality shiny print..
  • EASY-TO-USE: The Inland Silk PLA filament melts evenly and feeds smoothly into your 3D Printer creating defined corners with minimal warping and no odor. Produce your best print with our no-clog, bubble-free filaments. Inland filament is compatible with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle-free do no....
Check Stock

SainSmart PLA 3D Printer Filament,Toughness Enhanced PLA,Dimensional Accuracy +/- 0.03 mm, 1 KG Spool, 1.75 mm, White

  • Recommended Extrusion/Nozzle Temperature: 200 - 240 °C.
  • Recommended Bed Temperature: 60 - 80 °C.
  • High Strength PLA+ Filament has excellent machinal properties when compared with general PLA filament, its impact resistance is 4 times the standard one, tensile strength 1.5 times and elongation at break even 10 times. In combination with its resistance to temperature up to 68 °C (154°F), this PLA+ filament is a great fit for functional use..
  • Quality raw materials that eliminate impurities and bubbles, enabling smooth and effective filament feeding without jamming and warping..
  • With filaments well-wound onto the spool and a +/- 0.03 mm dimensional accuracy, what you got is a tangle-free filament that delivers smooth and consistent performance..
  • This PLA filament is an odorless and environmentally-friendly, plus with its ease of printing, making it your all-around, everyday budget filament..
Check Stock

eSUN 3mm Black PLA PRO (PLA+) 3D Printer Filament 1KG Spool (2.2lbs), Actual Diameter 2.85mm +/- 0.05mm, Black

  • 1KG net (approximately 2.2 lbs) Filament with Black Spool.
  • eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA..
  • 3mm Filament. 2.85mm Actual Diameter (Dimensional Accuracy +/- 0.05mm). This is 3mm filament and actual diameter is 2.85mm +/- 0.05mm. This filament does not work with 1.75mm printers. Make sure your printer supports 2.85mm filament before purchasing to avoid unnecessary returns..
  • Recommended Extrusion/Nozzle Temperature 210C - 225C, about 20 Celsius higher than regular PLA..
  • Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.05" - Inner Circle Diameter: 3.5".
Check Stock