Top Easy To Clean Wood looking Filament

AMOLEN 3D Printer Filament, Ebony Wood PLA Filament 1.75mm, 3D Printing Filament with 20% Real Wood Fiber,1kg

  • REAL WOOD FIBER - There is 20% wood fiber in the ebony wood PLA Filament. Therefore, you will get a print like a real wood with matte face and even wood smell..
  • REFUSE TO CLOGGING - The finely ground wood particles, double filtration, no impurities, make your printing smoother. Good shaping, no bubble, no jamming, no warping, no brittle..
  • HIGH COMPATIBILITY - Perfectly compatible with most of the FDM 3D Printer and 3D Pen, Comgrow Creality Ender, ANYCUBIC, Creality 3D, SUNLU, ERYONE, MYNT3D, 3Doodler, 1.75mm pla filament consistent diameter, dimensional accuracy +/- 0.03mm..
  • VACUUM & REUSABLE BAG - Vacuum packaging with desiccant to keep it dry and keep out dust.The bag has a sealing strip,the pla filament can be put back into the bag after use and sealed for storage..
  • ONE MONTH WARRANTY - Any problems, please contact us for free replacement or full refund. AMOLEN is committed to devolop high-quality and special filament..
  • Print Speed: 30-60mm/s, 40mm/s will be better.
Check Stock

JAYO PLA+ 3D Printer Filament Bundle, PLA Pro Filament 1.75mm, Neatly Wound Filament 2.5kg, 250g Spool, 10 Pack, Black+White+Grey+Red+Orange+Blue+Green+Yellow+Wood Color+Transparent

  • 【PLA+ Filament Bundle Multicolor】PLA Plus 3D printer filament bundle multicolor, 10 colors in total: Black+White+Grey+Red+Orange+Blue+Green+Yellow+Wood Color+Transparent. 10 rolls of multicolor 250g PLA+ Filament, individually vacuum packed, 2.5KG in total..
  • 【JAYO PLA+ 3D Filament 1.75mm】PLA PLUS filament is 10 times stronger than normal PLA Filament. PLA+ filament's better toughness, higher strength, lower warping and brighter color can make the 3D printing result better..
  • 【Neatly Wound Filament】Adopting 100% neatly line up filament skill, produced with full mechanical winding and strict manual examination. Making sure JAYO PLA+ filament neat and easy to be fed. Say goodbye to the tangling problem and unstable printing process..
  • 【1.75mm Filament Diameter】JAYO PLA Plus 3D printer filament has 1.75 mm diameter, dimensional accuracy +/- 0.02 mm, accurate diameter making it suitable for almost FDM 3D printers..
  • 【PLA+ Recommend Settings】We recommend printing the PLA+ filament at a nozzle temperature of 210-235°C, bed temperature of 55-65°C, printing speed of ....
Check Stock

Creality Ender 3 Pro DIY 3D Printer with Removable Magnetic Bed and UL Certified Power Supply 8.6

  • Full manufacturer's warranty fulfilled by Flashforge, and free email support provided by expert FlashForge technicians.
  • A sturdy metal frame that is substantially more stable than the Creator's original wood frame.Build volume 8.9 X 5.8 X 5.9 inches.
  • Aviation level aluminum plate with a thickness of 6.3mm guarantee its surface is completely flat and will not warp during heating process.
  • Metal platform support plus 10mm guide rod ensure a precise Z axis movement and prevent platform arm from deforming. Filament Compatibility- PLA, ABS, PLA Color Change, Pearl, ABS Pro, Elastic, PVA, HIPS, PETG, TPE, TPU, Conductive Filament, Flexible Filament, Metal Filled Filament, Wood Filled Filament, and PP.
  • Enclosed chamber insulates and protects ABS prints.Filament Diameter:1.75 mm [0.069 in].
  • Please refer the user manual below for better use.
Check Stock

ERYONE Filament PLA 1.75 mm, Special 3D Printing PLA Filament 1.75 mm for 3D Printers and 3D Pens,+/-0.03mm 1kg (2.2lbs)/Spool,Marble

  • 003cul003e 003cli003e【High Quality PLA Filaments】Special 1.75mm PLA filament is mainly made of PLA raw material and adding a certain proportion of special materials.8 Colors for you to choose from:glow green, marble, dark wood,light wood, metallic iron,metallic copper,metallic stainless steel and metallic tungsten.Perfect for anyone who needs to print special effects!003c/li003e 003c/ul003e.
  • 003cul003e 003cli003e【High Accuracy】1.75mm Filament diameter tolerance +/- 0.03 mm, ensuring easy feeding of PLA Filament for excellent surface quality and high precision in every print.003c/li003e 003c/ul003e.
  • 003cul003e 003cli003e【Strong Layer Adhesion】Special PLA 3D filaments has the characteristics of good ductility, strong toughness,no clogging,no warping,no bubbles,stable continuous feeding,no clogging of nozzles or extruders.003c/li003e 003c/ul003e.
  • 003cul003e 003cli003e【Sealed Packaging】The filament comes in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust and foreign matter.perfect winded filament pla,100% Tangle-Free before Unopened, no stringing and warping.003c/li003e 003c/ul003e.
  • 003cul003e 003cli003e【High Compatibility】Compatible with 99% FDM 3D printers and 3D pens that use 1.75MM filament.Made from starch r....
Check Stock

eSUN Cleaning Filament 1.75mm, 3D Printer Cleaning Filament, Prevent Nozzles and Extruders Clogging, 100g Spool 3D Printing Filament for 3D Printers, Natural

  • 【Cleaning Filament】Environmentally Friendly and Non-toxic. Keep your 3D printer nozzle in good health, clean between different material and color changes to extend nozzle life..
  • 【Prevent from Clogging】Designed to adhere to any stray material left in the nozzle and remove it along with the cleaning filament. It can clean a variety of 3D printer materials..
  • 【Easy to Use】Wide Cleaning Temperature Range 160°C-300°C. Clean the nozzle and extruder of 3D printer regularly, ensure feed smoothly and constantly without clogging..
  • High Compatibility】Perfect for multiple material including PLA, ABS, PETG etc. 100g(0.22 lbs) 3D printer cleaning filament is vacuumed sealed and comes with desiccant.PLEASE NOTICE THAT CLEANING FILAMENT CANNOT PRINT AS NORMAL FILAMENT..
  • 【When to Use】Before and after printing, change matrial with different melt point, colors and properties for better extruder protection and printing effect.With a certain level of adhesive ability, adhesive accumulated residual filaments and take them out to clean the interior extruder..
Check Stock

eSUN PLA-LW PLA 3D Printer Filament 1.75mm 1KG Spool Lightweight Strong Paint Adhesion Foaming PLA Filament for 3D Printers 3D Printed Airplane Natural

  • 【Low density & High Foaming Volume Ratio】ePLA-LW has applied active foaming technology to achieve lightweight, low-density PLA parts. The highest....
  • 【Clog-free & No Warping & Less-tangle 】Full mechanical winding and strict manual examination ensure tangling free and avoid filament breaking and....
  • 【Easy to Paint & Wide Application】eSUN ePLA-LW lighweight PLA filament is very easy to paint and has a strong adhesion of surface paint. So it is....
  • 【Good Interlayer Adhesion & Matte Printing Effect】 Compared to wood PLA filament,ePLA-LW filament has more stable interlayer adhesion, and the....
  • 【Foaming When Printing】At around 210°C-270°C, this filament starts to foam during printing, increasing its volume by nearly 1.2 times, and the....
Check Stock

Snapmaker Glow in The Dark PLA Filament 1.75mm, 3D Printer Filament 1kg Spool (2.2 lbs) Dimensional Accuracy +/- 0.03 mm 1 Pack

  • Glow in The Dark PLA Filament: This Snapmaker filament contains 20% glow powders that glow in the dark after absorbing light energy. Exposure to strong sunlight or UV light for only 30 minutes will get an amazing glow effect, but please attention that too long exposure time may damage the glow filament..
  • High Dimensional Accuracy: Advanced CCD diameter measuring and self-adaptive control system in the manufacturing guarantee Snapmaker Glow in The Dark PLA filament to be strict tolerances, diameter 1.75mm, dimensional Accuracy 99% Probability +/- 0.03 mm.
  • Clog-Free, Bubble-Free, and Easy to use: Designed and Manufactured with Clog-Free patent to guarantee a smoother and more stable printing experience with Snapmaker glow filament. Vacuum sealed with desiccants in a transparent bag, no bubble, and easy to print. Full mechanical winding and strict manual examination, to make sure the line tidy and less-tangle, so as to avoid possible snap and line breaking..
  • Wide Compatibility: Snapmaker glow in the dark PLA filament is ideal for use with practically all FDM 3D Printers, such as Ender, Prusa, Makerbot, Flashforge, Anet, Creality, Lulzbot, Makergear, Ultimaker, or any other printer accepting 1.75mm Wood glow filament..
Check Stock

MG Chemicals Wood 3D Printer Filament, 2.85mm, 1 Kg (2.2 lbs.) - Wood (WOOD30W1)

  • 2.85 mm diameter, Wood filament, 1 kg net weight.
  • Suggested print temperature ranges from 185°C to 230°C (365°F-464°F).
  • Diameter tolerance: 2.85Mm: 2.85+/-0.1Mm.
  • Compatible with all fused-filament 3D printers models (sold separately).
Check Stock

MG Chemicals WOOD17W5 Wood 3D Printer Filament, 1.75mm, 0.5 Kg (1.1 lbs.) - Wood

  • 1.75 mm diameter, Wood filament, 0.5 Kg net weight.
  • Suggested print temperature ranges from 185°C to 230°C (365°F-464°F).
  • Diameter tolerance: 1.75mm: 1.75+/-0.1mm.
  • Compatible with all fused-filament 3D printers models (sold separately).
Check Stock

FlashForge 3D Printer Creator Pro, Metal Frame Structure, Acrylic Covers, Optimized Build Platform, Dual Extruder W/2 Spools, Works with ABS and PLA

  • Full manufacturer’s warranty fulfilled by Flashforge, and free email support provided by expert FlashForge technicians.
  • A sturdy metal frame that is substantially more stable than the Creator’s original wood frame.Build volume 8.9 X 5.8 X 5.9 inches.
  • Aviation level aluminum plate with a thickness of 6.3mm guarantee its surface is completely flat and will not warp during heating process.
  • Metal platform support plus 10mm guide rod ensure a precise Z axis movement and prevent platform arm from deforming. Filament Compatibility- PLA, ABS, PLA Color Change, Pearl, ABS Pro, Elastic, PVA, HIPS, PETG, TPE, TPU, Conductive Filament, Flexible Filament, Metal Filled Filament, Wood Filled Filament, and PP.
  • Enclosed chamber insulates and protects ABS prints.Filament Diameter:1.75 mm [0.069 in].
  • Please refer the user manual below for better use.
Check Stock

Monoprice - 112504 Premium 3D Printer Filament 1.75MM 0.1kg/spool - Cleaning Filament - Compatible With Almost All 3D Printers And 3D Pens

  • Keep the nozzles and extruders on your 3D printer printing like new using this 1.75mm Cleaning Filament from Monoprice!.
  • It is a good idea to periodically clean the nozzles and extruders on your 3D printer to ensure that they feed filament smoothly and evenly..
  • It is also good to clean when switching filament colors or material types..
  • This cleaning filament is designed to adhere to any stray material left in the nozzle and remove it along with the cleaning filament.
  • To clean using this filament, simply print about 12" of material. It prints at a wide 160 ~ 260C temperature range.
Check Stock

ROLLINGDOG Angled Paint Brush Set with Ergonomic Wood Handle for Wall, Furniture, Trim, Cutting in Painting,3PC(1.5",2",2.5")

  • ERGONOMIC BRUSH SET 3PCS: with ergonomic wood handle, 1.5”/2”/2.5” trim paint brushes set balance comfortably between thumb and index finger reducing the fatigue for better control..
  • PREMIUM MATERIAL: Made of Solid Round Tapered filament, the paint brushes are designed to minimize brush marks for smooth and even finish with no bristles loss. Corrosion and rust resistant stainless steel ferrule for long-lasting use..
  • LASER ENGRAVING DESIGN: Premium Beech wood handle has a pattern laser engraved into wood to reduce palm sweat providing a better grip..
  • CUTTING IN & DETAIL PAINTING: Angled paint brushes allow you to choose appropriate size to paint wall, trim, furniture, cutting in and other detail painting..
  • EASY TO CLEAN: Paint brush set clean easily and can be reused after rinsing well,best with latex paint.
Check Stock