Top Easy to use Inputs - BuyWiseBest.com

Sound Storm Laboratories US10K Amplified Car Subwoofer - 1000 Watts Max Power Low Profile 10 Inch Subwoofer 8 Gauge Installation Included Great for Vehicles That Need Bass But Have Limited Space

Built-in Amplifier - Pulse Width Modulated design simplifies power supplies. It controls the output voltage and current precisely by removing the....
KIT – 17’/8G red power cable, 40 amp fuse holder, 3’/8G ground cable, 16’/18G blue remote cable, 16’ RCA interconnect, 4" wire ties, plastic....
Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use....
High Level Inputs - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the US10K to your factory radio or....
Low-Level Inputs - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the US10K with the source....

Check Stock

Planet Audio AC2500.1M Monoblock Car Amplifier - 2500 Watts Max Power, 2/4 Ohm Stable, Class A/B, Mosfet Power Supply, Remote Subwoofer Control

POWER: Maximum Power Output of 2500 Watts at 2 Ohms into one channel. Maximum Power output of 1250 Watts at 4 Ohms into one Channel. This amplifier is designed to run your subwoofer(s) giving them the power that they need to perform as they were meant to.
HIGH LEVEL INPUTS: Speaker level inputs are commonly referred to as high-level inputs. This input will be used to connect the AC2500.1M to your factory radio or aftermarket radio that does not have low-level (RCA) inputs..
LOW LEVEL INPUTS: Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the AC2500.1M with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers.
LOW-PASS CROSSOVER: A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. A low-pass filter will primarily keep high notes out of your subwoofer(s).
VARIABLE BASS BOOST: Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.

Check Stock

BOSS Audio Systems Elite SLIM10 Amplified Car Subwoofer - Low Profile, 10 Inch Subwoofer, Remote Subwoofer Control, for Vehicles Needing Bass with Limited Space

...lso eliminating all secondary feedback circuitry. Efficiency. Increased reliability.
Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s).
High Level Inputs - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the SLIM10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs.
Low Level Inputs - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the SLIM10 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers.
Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
Specs - Dimensions: 13.58” x 10.43” x 3.15”, Weight: 10.45 lbs. Phase control. LED status indicator. Thermal, Short and Overload Protection Circuits. High Performance Voice Coil. Rubber Surround. Aluminum Cone.
Warranty - BOSS Audio Systems provides a Powerful 3 Year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We strongly en....

Check Stock

BOSS Audio Systems BASS10 Amplified Car Subwoofer - Low Profile, 10 Inch Subwoofer, Remote Subwoofer Control, for Vehicles Needing Bass with Limited Space, Remote Subwoofer Control

...lso eliminating all secondary feedback circuitry. Efficiency. Increased reliability.
Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s).
High Level Inputs - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BASS10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs.
Low Level Inputs - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the BASS10 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers.
Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
Specs - Dimensions: 14” x 12.3” x 3.3”, Weight: 11.35 lbs. Phase control. LED status indicator. Thermal, Short and Overload Protection Circuits. High Performance Voice Coil. Rubber Surround. Aluminum Cone.
Warranty - BOSS Audio Systems provides a Powerful 3 Year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We strongly encoura....

Check Stock

BOSS Audio Systems BASS8 8 Inch Under Seat Powered Car Subwoofer – 800 High Output, Low Profile, Built in Amplifier, for Truck, Boxes and Enclosures, Remote Subwoofer Control

...lso eliminating all secondary feedback circuitry. Efficiency. Increased reliability.
Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s).
High Level Inputs - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BASS8 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs.
Low Level Inputs - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the BASS8 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers.
Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
Phase Control - Phase control lets you adjust the speaker phase with the amplifier if your speakers or subwoofer are hooked up “out of phase”.
Specs - Dimensions: 12.20” x 8.86” x 2.95”, Weight: 8.82 lbs. LED status indicator. Thermal, Short and Overload Protection Circuits. High Performance Voice Coil. Rubber Surround. Aluminum Cone, Remote Subwoofer Control.

Check Stock

Rockville SINGMIX 5 2000w Bluetooth DJ/Pro/Karaoke/Home Amplifier Mixer Receiver

Rockville SINGMIX 5 2000 Watt Bluetooth Amplifier/Mixer/Receiver, Speaker Outputs supports (4) 8 ohm speakers or (2) 8 ohm speakers or (2) 4 ohm....
SD card playback will play music files stored on a memory card,Precision tuning with metal knobs,Mic mixer: 3 front microphone inputs with volume,....
Full function remote gives you easy access to all the important features, Built in pre-amplifier, Built in FM radio with manual tuning, and auto-scan,....
Specifications: RMS @ 4 Ohm less than 1 % THD: 600 Watts RMS (300 x 2), RMS @ 8 Ohm less than 1 % THD: 400 Watts RMS (200 x 2), Peak @ 4 Ohm at 10 %....
Inputs and Outputs: Front: (3) ¼” mic inputs (additional 2 mic inputs on the rear), Front: USB/SD Inputs, built-in Bluetooth, FM radio, Rear: (2)....

Check Stock

Rockville RAM15BT 15 Rechargeable Powered 800W PA Speaker+2 Mics+Bluetooth+Stand

Rockville SINGMIX 5 2000 Watt Bluetooth Amplifier/Mixer/Receiver, Speaker Outputs supports (4) 8 ohm speakers or (2) 8 ohm speakers or (2) 4 ohm....
SD card playback will play music files stored on a memory card,Precision tuning with metal knobs,Mic mixer: 3 front microphone inputs with volume,....
Full function remote gives you easy access to all the important features, Built in pre-amplifier, Built in FM radio with manual tuning, and auto-scan,....
Specifications: RMS @ 4 Ohm less than 1 % THD: 600 Watts RMS (300 x 2), RMS @ 8 Ohm less than 1 % THD: 400 Watts RMS (200 x 2), Peak @ 4 Ohm at 10 %....
Inputs and Outputs: Front: (3) ¼” mic inputs (additional 2 mic inputs on the rear), Front: USB/SD Inputs, built-in Bluetooth, FM radio, Rear: (2)....

Check Stock

2 Rockville SBG1154 15 800W Passive 4-Ohm Pro DJ Subwoofers MDF/Pole Mount

Rockville SINGMIX 5 2000 Watt Bluetooth Amplifier/Mixer/Receiver, Speaker Outputs supports (4) 8 ohm speakers or (2) 8 ohm speakers or (2) 4 ohm....
SD card playback will play music files stored on a memory card,Precision tuning with metal knobs,Mic mixer: 3 front microphone inputs with volume,....
Full function remote gives you easy access to all the important features, Built in pre-amplifier, Built in FM radio with manual tuning, and auto-scan,....
Specifications: RMS @ 4 Ohm less than 1 % THD: 600 Watts RMS (300 x 2), RMS @ 8 Ohm less than 1 % THD: 400 Watts RMS (200 x 2), Peak @ 4 Ohm at 10 %....
Inputs and Outputs: Front: (3) ¼” mic inputs (additional 2 mic inputs on the rear), Front: USB/SD Inputs, built-in Bluetooth, FM radio, Rear: (2)....

Check Stock

Roland Professional A/V V-1HD HD Video Switcher

4 HDMI Inputs: The V-1HD has 4 HDMI input connectors compatible with a variety of equipment. The V-1HD supports 1080p/1080i/720p video resolutions. Devices outputting the same resolution can be input regardless of what type of device they are. Both progressive and interlace signals can be input allowing for both 1080i and 1080p signals to be used at the same time..
Professional Switching: The V-1HD has large back-lit buttons for intuitive video switching even in low light conditions. The V-1HD even lets you know which inputs have sources connected by illuminating the buttons of the inputs with connected sources. The V-1HD features broadcast style Preview/Program switching for professional results..
Effects: Compositing two videos in one screen using Picture in Picture or the split function is ideal for seminars and presentations. The V-1HD also supports chroma key and luminance key which ideal for creating professional looking broadcasts using green screen backgrounds or for overlaying computer generated titles on top of video sources..
Audio Mixing: Included is a 12 channel digital audio mixer. The V-1HD can mix 4 stereo audio inputs from the HDMI ports, the stereo line level input and a mic level input. Every channel is equipped with a delay function ....

Check Stock

Acoustic Audio by Goldwood AAT3002 Tower 5.1 Home Theater Bluetooth Speaker System with 8\ Powered Subwoofer

BLUETOOTH 5.1 HOME TOWER SPEAKER SYSTEM - Stream music from your phone to the built in Bluetooth receiver, integrated power amp with 1000 watts system power, Pro Surround function automatically converts stereo to 5.1 sound.
EASY PLUG AND PLAY CONNECTIONS - Standard RCA inputs connect to most audio sources, 6 independent RCA inputs for true surround, stereo RCA AUX inputs, front panel controls with USB drive and SD card input, 2 mic inputs with controls.
HIGHEST QUALITY - Powered subwoofer with 8" woofer is 16.375" x 10.25" x 14.5.

Check Stock

Monolith Liquid Gold Balanced Headphone Amplifier & DAC by Alex Cavalli, Solid State Amp, AKM AK4493EQ DAC, Balanced & Single-Ended Headphone Outputs

...oad. The amplifier is microprocessor controlled using precision A-to-D and D-to-A conversions to manage and monitor the runtime behavior of all critical aspects of the circuitry..
AKM AK4493EQ DAC: Detailed sound. Exceptional musicality. The AKM AK4493 is AKM's new flagship 32-bit stereo premium DAC. It supports PCM inputs up to 768kHz and a Direct Stream Digital (DSD) input of 2.8/5.6/11.2 (maximum) MHz, the industry's highest level. An internal circuit employs a newly developed 32-bit digital filter for the ultimate in sound quality and musicality..
Balanced and Single-Ended Headphone Outputs: With multiple inputs and outputs for balanced and single-ended operation and easy front panel input selection, the Liquid Gold X is compatible with just about everything..
Versatile Inputs: Digital or Analog — We've Got You Covered: The Liquid Gold X amplifier features both single-ended and balanced analog inputs, as well as USB, Coaxial, and Optical digital inputs to support all your connectivity needs..
4x and 6x gain settings and an approximate full output power of 3.6 watts per channel into a 50-ohm load..

Check Stock

Xiaokeis Optical Audio Splitter, 2 in 1 Out Optical Cable Splitter Fiber Replacement, Optical Splitter Dual Port Optical Adapter Audio Cable Fiber Optic Adapter(Black)

... for one-in and two-out distribution.Plug and play, no need for other equipment and softwareSmall and exquisite, easy to use, easy to carry, easy to store.
✅Fiber Splitter 2 In 1 Out Optical Adapter - It supports 1 male input to 2 female outputs at same time.
If 2 female inputs to 1 male output, you need turn off one female inputs device,2 female inputs can‘t work at the same time,or will interfere and cause noise..
✅Optical Audio Splitter - If a power amplifier has only one fiber interface, and there are two fiber interfaces that need to be connected to the power amplifier, use this adapter to get it. No need to change the line when using this adapter, so the interface will not be damaged. Note: It isn't suitable for TV.
✅Audio Cable Splitter - No need to change the line when using this adapter, so the interface will not be damaged. 24k Gold Connectors, 1mm low-loss core, low-jitter synthetic fiber and heavy metal connectors to dampen vibration, giving you the ultimate listening experience.
✅Wide Application - Optical audio splitter apply to A/V receiver, player, he....

Check Stock