Top Ecu For K Swap

Dell - 2TB 7.2K RPM 6Gb/s 3.5" SAS HD - Mfg # R755K (comes w/ drive & tray)

  • Original Dell Hard Disk Drive Part Number: R755K.
Check Stock

Autel MaxiPRO MP808BT KIT Automotive Scan Tool, 2023 Upgrade of MS906 MP808, 2 Years Updates (Worth $700), ECU Coding for Unlock Hidden, 150 Adapters, Bi-Directional Control Scanner, 30 + Services

  • 【2023 NEW ADDED FUNCTIONS & 2-YEAR FREE UPDATeS】Autel MP808BT KIT scanner has been fully upgraded from one-year updates to 2 years of free updates. Please upgrade the system to V2.62 and above to get new features. ECU Coding for Peugeot/ Citroen/ GM etc Refresh hidden and VAG Guided for Audi/ VW/ Skoda/ Jetta etc Battery Tests (work with BT506) Check difficult-to-reach areas ( work with MV108） Support 2018 and later FCA car AutoAuth login such as Chrysler, JEEP, Dodge, Fiat, etc..
  • 【2023 NEWEST, UPGRADED OF MP808/DS808/MP808K】Autel MP808BT KIT diagnostic scanner with 2-year updates (worth $700), 30+ services, bi-directional control, OE-Level all systems, excellent hardware, wider vehicle coverage, etc✅MP808/DS808 are ancient models for old cars, MP808BT Pro with 11 non-standard adapters (Valued $150) not only works on obd 2 but also non-standard OBD 2 cars✅Same functions as MS906 but cheaper $170, MP808BT working range for BT communication is about 33 feet (about 10 m)..
  • 【ECU CODING UNLOCK HIDDEN FEATURE & VAG GUIDED】Autel scanner MaxiPRO MP808BT KIT with ECU coding refresh hidden function to level up your vehicle. MP808BT pro can wor....
Check Stock

AlfaOBD Demo

  • Native support of Electronic control units (ECU) used in Fiat group cars.
  • Reads and clears faults from all ECU, reads ECU status, monitors various dynamic parameters.
  • Full version: active diagnostic and car configuration procedures, elsectronic key and remote controls programming.
Check Stock

XTOOL D9 Automotive Diagnostic Scan Tool with 3 Years Updates($900 Value), 2023 Newest, CAN FD & DoIP, Topology Mapping, 42+ Services, ECU Coding, Bi-Directional Control, All Systems Diagnostics

  • 【Smart Diagnostic System】XTOOL D9 is a 2023 new released 9.7” smart diagnostic tool featured OE level all systems diagnostics, Module Topology Mapping, full bi-directional controls, 35+ special functions, ECU coding capabilities, support CAN FD/DoIP/RP1210/OBDII protocol vehicles, comes with Complete Connector Kit and can work with key programmers, inspection camera to extent capabilities. NOTE: Please reach us with VIN # via xtoolofficial @ hot mail c om to check compatibility before purchase!.
  • 【Module Topology Mapping】XTOOL D9 intelligent diagnostic computer comes with Module Topology Mapping that displays interrelationships among various vehicle modules and views faulty modules in one glance to reduce guesswork performing all systems scan and improve diagnostic efficiency by 60% for automotive technicians, mechanics, car dealers and advanced DIY mechanics. NOTE: Software already released for GM, for Ford, for Toyota, for Honda, for Nissan, for Mazda and for BMW. More to come..
  • 【ECU Coding + Programming】XTOOL D9 ECU Programming & Coding tool can perform Offline Programming on Ford, Lincoln, Mazda vehicles, to update ECU software/firmware, program....
Check Stock

RED WOLF OBD2B to OBD1 ECU Conversion Jumper Harness Adapter Replacement For 1998-2002 Honda Accord 1999-2000 Honda Civic 2000-2001 Acura Integra

  • Compatible with Acura integra 2000-2001, Honda civic 1999-2000, Honda accord 1998-2002 TO use an OBD1 1992-1995 ECU vehicle..
  • Jumper harness allows you to use the obd1 computers with the obd2B wiring harness in car or means adapt obd2B engine harness to obd1 ecu..
  • Easy to use. Directly plug and play no need to cut any wire. For manual transmission only, not for automatic transmission..
  • This harness convert a OBD2B in OBD1 ECU connector. If the ecu are not a obd1 and the wiring harness that in the car are not obd2B, the jumper will....
  • Noted: OBD2B ONLY, NOT FIT OBD2A. It not about what engine you have, it's about what computer you are using with what harness..
Check Stock

Woopeey Electric Dual Fan Upgrade Wiring Harness Fit for GM 1999–2006 ECU Control Electric Cooling Fan Wire Harness Kit Replace OE # 7L5533A226T

  • 【Compatibillity】-The Electric Cooling Fan Wire Harness Kit Fit for GM 1999–2006 ECU Control..
  • 【Replace OE Part Number】-Cross Reference Part Numbers: 7L5533A226T, please check OEM part number and compatibility to ensure you purchased correct items!.
  • 【High Quality Material】-Made of durable corrosion and dust resistant material. 100% tested and meets or exceeds OEM specifications..
  • 【Function】-You can use this harness to pin your electric fan upgrade directly through the ECU and let it control the fans (ECU does need flashed). The harness is setup to control your dual fan combo and comes wired with 05+ GM truck plugs..
  • 【Package Contents】- 1 X ECU Control Dual Electric Fan Upgrade Wiring Harness Kit. Professional Installation is Highly Recommended (No Instructions Included)..
Check Stock

THINKCAR Bidirectional Scan Tool ThinkTool Pd8, 2023 New OEM Full System & 34+ Service Car Scanner Diagnostic for All Cars, ECU Coding, Key Programmer, AutoAuth for FCA SGW, Power Balance, Free Update

  • ...p,Alfa Romeo and Fiat after 2017➤Setting & Changeover (adblue reset, unlock the engine after a collision, cancel ABS driving test, and more) for Benz ➤Modification for BMW ➤Offline Coding ➤Customization ➤Personalization, and keep growing..
  • 【Bi-Directional + ECU Coding & Replacement + 34 Services + Active Test + Adaptation + Initialization + Matching 】ThinkTool PD8 car diagnostic scanner tool support ECU Coding to quickly match, learn, code any replaced ECU. Modify ECU and reveal hidden features for 99% cars in the market. Adaptive data for certain components after repairs or replacements. Online coding is an expensive function worth $1000+. Online Coding is compatible with VW, Audi, BMW, Porsche, etc..
  • 【OEM Full System Diagnostics + Quick Update Frequency】The ThinkTool PD8 car all-system scanner can perform OE-level diagnosis and analysis on all available systems: ECM, TCM, ABS, SRS, BCM, BMS, TPMS, and A/C system, etc. Through reading/erasing codes, viewing live data, retrieving ECU info, and performing active tests & service functions, ThinkTool PD8 evaluates the car’s health status for 200，000+ models. With quick update frequency....
Check Stock

LAUNCH X431 PADVII, ECU Programming Scan Tool, Topology Map Full System Intelligent Diagnostic Scanner, Online Coding, 60+ Services, Heavy Duty Truck Scanner, 13.3 Inch,5G WiFi,2 Years Free Updates

  • [ECU PROGRAMMING & ECU CODING] Launch x431 PADVII ECU programming support 30+ car brands, such as Benz, BMW, Porsche, etc, It can program/ rewrite/ code/ match the blank/used ECUs and upgrade the ECU software version. ECU Coding for Component Matching after replacement or reflash modules to activate hidden features / deactivate features, without the use of often very expensive factory automotive scan tools. ECU Programming and Coding is not universal, please send VIN to check before ordering..
  • [UNMATCHED COVERAGE, Truck & Car 2 in 1 Diagnostic Tool] 2022 LAUNCH diagnostic tool works on 200+ car brands, support 12/24V passenger cars & commercial vehicles. FCA Secured Gateway Access (SGW) Authorization “OE-level coverage for Asian, Euro, Domestic Cars, Launch x431 padvii not only supports J2534 diagnostic standard but also exclusively supports D-PDU/ RP1210 and CAN2.0/CAFD/DoIP protocols, which makes it compatible with OE factory tools to perform further services and programmings..
  • [2022 LAUNCHX431 PADVII: TOP INTELLIGENT DIAGNOSTIC] LAUNCH X431 PADVII diagnostic scan tool is the first intelligent one in industry ①Topology module mapping overview of virtually the all-systems communication status②Pin detection function to detect pin volt, data rate,....
Check Stock

Autel Scanner MaxiSys Ultra EV Car OBD2 Scanner with EVDiag Box VCMI Battery Pack Analysis Bidirectional Scan Topology Map Full System Diagnostics ECU Coding 40+Functions Better MS Ultra MS919 MS909

  • ...cle Communication and Measurement Interface) is used as an integrated device that functions as an oscilloscope, a waveform generator, a multimeter and a bus inspection. It can perform super precise and most overall diagnostic and services on 99% vehicles in the market..
  • 【ECU Coding & Programming】Autel MaxiSys Ultra enhanced the process of ECU programming , which can finish program/ rewrite/ code/ match new ECU after new module replacement. Besides the ECU Programming, Autel MaxiSys Ultra support advanced ECU Coding on 90% cars, which unfold the hidden features and activate high-end functions to improve vehicle performance. Note: ECU Programming and Coding is not universal, please contact [email protected] comfor check before order..
  • 【40+ Maintenance Functions】The TOP car diagnostic scanner Maxisys Ultra supports the most comprehensive services on 99% vehicles, specially designed to provide quick access to the vehicle systems for various scheduled service and maintenance tasks including EPB Reset, SAS, Battery Reset, Throttle Reset, ABS Bleed, Injector Coding, IMMO Service, Suspension Calibration, Transmission, Headlamps, Window Door Roof etc. Toget....
Check Stock

ACDelco GM Original Equipment 10085754 Crankshaft Pulley , Black

  • Compatible/Replacement For: Acura / Honda K20 / K24 Engines Only.
  • [ Attention: Some Listed Models Will Require Engine Swap Of A K-Series Engine ].
  • Please Check Your Engine Before your purchase.
  • Lightweight aluminum pulley made from T6061 aluminum and anodized for durability.
  • No Installation Guides Are Included, We Highly Recommend To Seek Professional Installation.
Check Stock

LAUNCH X431 PAD VII, 2023 J2534 Reprogramming Tool, ECU Online Coding, Topology Map Intelligent Diagnostic Scanner, 2 Years Free Update, Upgraded of X431 PAD3/ V+, 50+ Services, Bi-Directional Control

  • 【LAUNCH X431 PAD VII, 2023 Top Diagnostic Scanner】 The latest all-around scan tool, upgraded from LAUNCH X431 PRO5/PADIII/V+ 4.0 and rival OEM car scanners. High-end ECU programming backup/restore for 30+ car brands (the most on market), ECU/SCN coding, J2534/RP1210/D-PDU/Do-IP/CANFD, topology mapping, 50+ service functions, guided functions, highest hardware configuration … with 99.99% worldwide car coverage. LAUNCH X431 PAD VII is a worthwhile investment for repair shops and mechanics..
  • 【Huge-Upgraded ECU Programming & Coding】 Beyond the reach of most competitors, LAUNCH X431 PAD VII features ECU Programming working on upmost 30+ car brands: 1) Backup/Restore data from original ECUs, you won't find this in any other tools.
  • 2) Programming offline or online, manual or automatic to meet more needs.
  • 3) R-etrofit, e.g. replace halogen lamp. 4) ECU Upgrade, e.g for Fuel quality d efect firmware. Coding features: Recode ECU Data, Personalization, and loads of more..
  • 【LAUNCH X431 PAD VII, 50+ Services & Topology】 LAUNCH X431 PAD VII bidirectional scan tool has 50+ service functions, like Oil Reset/ABS Bleeding/Injector Coding/AdBlue Reset … to win more business. Topology mapping checks DTCs and all-system communication status visually in....
Check Stock

Washinglee OBD2 Diagnostic Cable for VW Audi Skoda and Seat Car ECU Scanner USB Cable Support VAG KKL 409

  • ［Application Scenes］-Read/Clear DTC trouble codes, read Control Modules, Code Modules, Adaptions, for Volkswagen, Audi, Skoda, seats. Please refer....
  • ［Converter Cable］- Made by Washinglee. Built in FTDI chip, USB A 2.0 to OBDII 16-pin male. No CD inside the package, Driver/APP will be sent to....
  • ［Protocols Supported］- Support terminal K bus communication, Terminal (L) ignition device for waking up ECU..
  • ［APP and OS Supported］- Support KKL409. Support 32 bit XP and 32 bit Win7. If your computer is running on 64 bit Win10, Win10 still provides....
  • ［Important Note］-Without CD inside the package, the driver and User Manual will be sent to buyers by Email. Not support directly 64 bit Win10....
Check Stock