Top Electric Boat Motors

NyVoozy Transom Trolling Motor Mount for Kayaks, Trolling Motor Mount for Clamp-on Electric Trolling Motors, Maximum Trolling Motor Thrust of 62 Pounds

  • Adding the boat rudder to your boat trolling motor made the trolling motor more stable as trolling motors are known for lack of steering especially when the big wind picks up. With trolling motor stabilizer, even in the big wind, the direction is in your own hand, don’t worry rudder out of control any more. It is recommended using for towing motors which the biggest horsepower up to 3 HP or the biggest thrust up to 70 pounds, recommended the maximum weight for 55 pounds..
  • Our kayak rudder kit measures 3.75″ high x 4.75″ wide and suitable for a 23-32MM” shaft diameter which is boat rudder clamp compatible with most 24-55lb transom mount trolling motors. It’s commonly used for motor guide trolling motors, minn kota trolling motor, newport vessel trolling motor, etc. Designed for kayak, canoe, seayak, angling boat, etc..
  • It can last long time. And the screws are made from hight quality material which is one kind of anti-rust and resistant to hydrochloric acid corrosion material, so you could use it in the seawater..
  • Very easy to install, just with screws, you could install our trolling motor mount to trolling motor only a few minutes. Because of multiple pattern screws, so you could install it on all kinds of boats..
Check Stock

Trolling Motor Accessories, Haoguo Paddle Boat Parts, Boat Rudder Fits Most 24-55 Thrust Trolling Motors, Great for Pontoon, Fishing Kayak, Canoe, Jon Boat

  • MORE CONTROL – Turns easily when steering and provides better control in wind and most weather conditions, decreasing the need for oars, it does help to keep your boat on course in the wind, and prevent the boat from spining as much when the motor is off.
  • UNIVERSAL MOUNT – Compatible with most electric trolling motors (24 to 55 thrust). Ideal for use as a canoe rudder, or a inflatable pontoon rudder, kayak rudder, or pelican bass raider 10E rudder. Please note, it will NOT work on a self deploy bow mount trolling motor.
  • EASY INSTALLATION – Complimentary socket wrench for easy installation, it takes only a few minutes to attach the rudder to the shaft of your small watercraft motor and can be mounted in an upright position on the front or back of the shaft. You may even mount it with the short end down (upside down) for shorter motors. A universal design for your needs.
  • BOW MOUNT – Fits the EDGE, Minn Kota, MAXXUM, and FORTREX. The bow mount motor must be a hand cable pull, NOT self deploy. Your bow mount setup needs to have 1ft shaft protruding from the end of the platform allowing enough room to attach the rudder.
Check Stock

Annurssy Brackets & Hinge Assembly for Boat Engine Outboard Electric Trolling Motor

  • Approved for up to 40hp motors (for motors without factory trim and tilt or standard BIA bolting pattern).
  • Works with 0-20hp motors with electric trim and tilt.
  • The Mini Electric On The Fly Jack Plate is easy to install.
  • Our jack plates can be raised and lowered by a up/down push button while on the water within seconds from top to bottom..
  • 3 year warranty on the jack plate housing - 1 year warranty on the electric actuator.
Check Stock

Lubrimatic 11382 High Temp Disc/Drum Brake Wheel Bearing Grease, 4 lb. Tub

  • Lithium complex grease designed for multipurpose everyday applications.
  • Excellent grease for farm equipment, powersports equipment, automotive grease lube points, ball joints, bushings, chassis lubrication, electric motors, gears, plain bearings, presses, roller bearings, tie-rod ends, steering knuckles, trailers, hitch ball, universal joints, wheel bearings, winches.
  • Mechanics choice for automotive grease applications and truckers choice for fifth wheel (5th wheel) grease.
  • Superior water resistance, extreme pressure and high temperature protection suitable for scheduled maintenance greasing of journal and anti-friction bearings, chassis fittings, springs, water pumps, universal joints, non-disc brake wheel bearings, lawn mower equipment, power tools and more!.
  • Typical industries include automotive, car, truck, motorcycle, ATV, boat, construction, mining, drilling, and several industrial applications.
Check Stock

Carbon Brushes 999038 for Hitachi Power Tool Motor

  • Carbon motor brushes are one of the most components for power tool. Fit for electric hammer, electric drill, angle grinder, etc..
  • Carbon motor brushes are one of the most components for power tool like electric drill..
  • Worn brushes are often the cause of a poorly running motor.
  • Replacing brushes can fix an intermittent motor..
  • New brushes can restore a motors electric braking Used widely for various of power tools and electric motors, such as rotary hammer drill, circular saw, cut-off saw and angle grinder..
Check Stock

Watersnake Venom 34lb Thrust Electric Motor (Fresh & Saltwater)

  • STURDY SIMPLE DESIGN: Our Watersnake Venom SXW electric motors provide saltwater anglers with a versatile range of tiller-steer transom-mount motors that are loaded with clever features. The shafts on all Venom SXW motors are an extra-tough composite constructed specifically for use in saltwater marine environments. The tiller handles are telescopic for versatility, comfort and control..
  • CONTROL + FEATURES: The 34lb motors have a two-blade propeller. The 54lb motors each run a three-blade propeller. All propeller shafts are stainless steel and the props have a weedless design, so you can push the boundaries during your next adventure. All the motors run on 12V power and operate with 5 forward and 3 reverse speeds, which are controlled with the tiller handle throttle..
  • ELECTRIC POWER: 54 lbs thrust, 12 Volt motor, 13-54 Amps / 34 lbs thrust, 12 volt motor, 7.5-34 amps. Battery Not Included. Each motor is suited to boats ranging from small tenders and tinnies up to dedicated estuary and inshore sportfishing boats..
  • VERSATILE TRANSOM MOUNT: The compact and stylish new Venom motor head design incorporates a new thicker ergonomic grip for the tiller handle. The new head design also includes a digital voltage meter display, so you can keep track of your batte....
Check Stock

TUFFIOM Outboard Boat Motor Stand, Engine Carrier Cart Dolly for Storage, 315lbs Weight Capacity, w/Wheels (Black)

  • ...ure a good and stable structure and a high load capacity..
  • 【High Load-bearing Capacity】 This outboard boat motor stand carrier cart dolly features a thickened pine hanging board with a loading capacity of up to 154.32lbs, which can withstand the weight of most outboard motors..
  • 【Good Stability】 It has a geometric triangular structure and two widened rear wheels, making the trolley more stable and less likely to tip over, so it is easier and safer to use.The simple construction of this trolley makes it very easy to install. It comes with all the necessary accessories in the package for convenient and time-saving installation..
  • 【Space Saving】The two support frames on the sides have been carefully designed with clasps so that you can fold this trolley quickly and without taking up too much space. So all you need is a car boot or a small corner to store it..
  • 【Wide Application】 Heavy duty outboard boat motor stand carrier cart dolly is suitable for long and short shaft motors for moving outboards with up to and including 30 hp and can also be used to repair and display o....
Check Stock

Watersnake Venom Swet 54 Pound Thrust 12V Electric Trolling Motor with 42\ Steel Shaft

  • STURDY SIMPLE DESIGN: Our Watersnake Venom SXW electric motors provide saltwater anglers with a versatile range of tiller-steer transom-mount motors that are loaded with clever features. The shafts on all Venom SXW motors are an extra-tough composite constructed specifically for use in saltwater marine environments. The tiller handles are telescopic for versatility, comfort and control..
  • CONTROL + FEATURES: The 34lb motors have a two-blade propeller. The 54lb motors each run a three-blade propeller. All propeller shafts are stainless steel and the props have a weedless design, so you can push the boundaries during your next adventure. All the motors run on 12V power and operate with 5 forward and 3 reverse speeds, which are controlled with the tiller handle throttle..
  • ELECTRIC POWER: 54 lbs thrust, 12 Volt motor, 13-54 Amps / 34 lbs thrust, 12 volt motor, 7.5-34 amps. Battery Not Included. Each motor is suited to boats ranging from small tenders and tinnies up to dedicated estuary and inshore sportfishing boats..
  • VERSATILE TRANSOM MOUNT: The compact and stylish new Venom motor head design incorporates a new thicker ergonomic grip for the tiller handle. The new head design also includes a digital voltage meter display, so you can keep track of your batte....
Check Stock

Hitachi 49C60 LVDS Cable Ribbon (Main Board to Panel)

  • Carbon motor brushes are one of the most components for power tool. Fit for electric hammer, electric drill, angle grinder, etc..
  • Carbon motor brushes are one of the most components for power tool like electric drill..
  • Worn brushes are often the cause of a poorly running motor.
  • Replacing brushes can fix an intermittent motor..
  • New brushes can restore a motors electric braking Used widely for various of power tools and electric motors, such as rotary hammer drill, circular saw, cut-off saw and angle grinder..
Check Stock

Newport Vessels L-Series 62lb Thrust Transom Mounted Saltwater Electric Trolling Motor w/ LED Battery Indicator (40\ Shaft)

  • EFFICIENT POWER: 62lb Thrust - this 12v electric trolling motor provides excellent power and efficiency for any boater. The high quality build allows the motor to run all day long without overheating, or making noise to spook fish..
  • FEATURES: This motor features a 40 inch shaft, a 10 LED battery meter, a 6 inch telescoping tiller handle, and 3 blade propeller. The mount angle, height, and direction can all be adjusted and locked into place when needed..
  • SPEED: Motor has 8 speeds, 5 forward & 3 reverse and is designed for trolling, so top speed of motor is about 4.25mph, speed depends on your boat shape, weight, water, wind, & other factors. 3 Blade Propeller has great low end torque to get boat moving..
  • BATTERY: 62lb motor requires one (1) 12V Lead-Acid Deep Cycle or Lithium Deep Cycle battery (battery not included), 50ah recommended. Motor includes 60amp circuit breaker recommended at all times to protect from battery voltage surges. Max Amp Draw: 58A.
  • QUALITY & WARRANTY: All Newport motors are made w/ high quality stainless steel, magnesium, & zinc hardware to withstand freshwater and saltwater environments. We back every product we make with industry leading customer service and a 2 year warranty..
Check Stock

RC Car Amphibious Remote Control Car Boat with 2.4 GHz RC Stunt Car 4WD&Double Sided 360° Rotate Hobby RC Car Birthday Toy for Age 6 7 8+ Girls Boys Teens Aadults

  • ...itly,keep balance on single wheel running and never roll over.Forward,back,left turn,right turn.Quickly overcomes all obstacles.Cool car toys for kids and adults!.
  • 【2.4GHz LONG DISTANCE CONTROL&STRONG POWER】30meters long distance remote control,2.4GHz signals support RC boat toys playing without any interference.Electric energy converted into power maximizely,no matter land,sandy beach,wetlands,grasslands or water RC trunk can through easily,fearless! (2 AA battery excluded).
  • 【4WD ADJUSTABLE SPEED&RECHARGEABLE BATTERY】RC car has two powerful motors with 4WD flexible wheels for quick turns,ensure its high speed&can be adjusted by remote control.Amphibious off road trank came with one rechargeable battery (included).Charging fast and long-lasting of use.Kids and adults will enjoy the fun for a long time too..
  • 【HIGH QUALITY&LONG TIME USE&BEST GIFTS】ABS aviation plastic makes the amphibious off road trunk's body more durable and waterproof.With the high-geadr rubber,it is not easy to break or fall off.High quality car boat make the fun last longer.RC remote control car boat is the best gifts for 6+ children teens adults..
Check Stock

Minn Kota 1854053 MKA-53 Electric Steer Trolling Motor Composite Quick Release Bracket Black

  • Designed to meet the increased stress created by high thrust motors and long shaft lengths.
  • Allows bow-mount trolling motors to be quickly mounted and/or removed from boat deck.
  • Low-profile design attaches trolling motor to top bracket and drop in over deck-mounted puck.
  • Constructed of marine grade composite, powder-coated aluminum, and stainless steel to resist rust, corrosion, and discoloration.
  • Recommended for 112 lbs thrust and 72" shaft trolling motors.
Check Stock