Top Electric Motors Generators

Slotted Shim Assortment Kits - size b 3x3 assorted slotted shims

  • Convenient assortment to carry to job site.
  • Shims marked with thickness in decimal and metric.
  • Slotted shim is the best way to solve alignment and leveling problems on motors pumps generators and.
Check Stock

Annurssy Brackets & Hinge Assembly for Boat Engine Outboard Electric Trolling Motor

  • Approved for up to 40hp motors (for motors without factory trim and tilt or standard BIA bolting pattern).
  • Works with 0-20hp motors with electric trim and tilt.
  • The Mini Electric On The Fly Jack Plate is easy to install.
  • Our jack plates can be raised and lowered by a up/down push button while on the water within seconds from top to bottom..
  • 3 year warranty on the jack plate housing - 1 year warranty on the electric actuator.
Check Stock

Berryman Products 1540 Energized Electric Parts cleaner 19 oz. Aerosol Can

  • For use where active current or Electrostatic potential exists.
  • Instantly dissolves dirt, grease, oil, and other contaminants.
  • Easily cleans a wide variety of electrical components including motors, generators, relays, brushes, contacts, and commutators.
  • Non-flammable, non-staining, and non-corrosive formula.
  • NOT intended for use on sensitive electronics.
Check Stock

Carbon Brushes 999038 for Hitachi Power Tool Motor

  • Carbon motor brushes are one of the most components for power tool. Fit for electric hammer, electric drill, angle grinder, etc..
  • Carbon motor brushes are one of the most components for power tool like electric drill..
  • Worn brushes are often the cause of a poorly running motor.
  • Replacing brushes can fix an intermittent motor..
  • New brushes can restore a motors electric braking Used widely for various of power tools and electric motors, such as rotary hammer drill, circular saw, cut-off saw and angle grinder..
Check Stock

Watersnake Venom 34lb Thrust Electric Motor (Fresh & Saltwater)

  • STURDY SIMPLE DESIGN: Our Watersnake Venom SXW electric motors provide saltwater anglers with a versatile range of tiller-steer transom-mount motors that are loaded with clever features. The shafts on all Venom SXW motors are an extra-tough composite constructed specifically for use in saltwater marine environments. The tiller handles are telescopic for versatility, comfort and control..
  • CONTROL + FEATURES: The 34lb motors have a two-blade propeller. The 54lb motors each run a three-blade propeller. All propeller shafts are stainless steel and the props have a weedless design, so you can push the boundaries during your next adventure. All the motors run on 12V power and operate with 5 forward and 3 reverse speeds, which are controlled with the tiller handle throttle..
  • ELECTRIC POWER: 54 lbs thrust, 12 Volt motor, 13-54 Amps / 34 lbs thrust, 12 volt motor, 7.5-34 amps. Battery Not Included. Each motor is suited to boats ranging from small tenders and tinnies up to dedicated estuary and inshore sportfishing boats..
  • VERSATILE TRANSOM MOUNT: The compact and stylish new Venom motor head design incorporates a new thicker ergonomic grip for the tiller handle. The new head design also includes a digital voltage meter display, so you can keep track of your batte....
Check Stock

Watersnake Venom Swet 54 Pound Thrust 12V Electric Trolling Motor with 42\ Steel Shaft

  • STURDY SIMPLE DESIGN: Our Watersnake Venom SXW electric motors provide saltwater anglers with a versatile range of tiller-steer transom-mount motors that are loaded with clever features. The shafts on all Venom SXW motors are an extra-tough composite constructed specifically for use in saltwater marine environments. The tiller handles are telescopic for versatility, comfort and control..
  • CONTROL + FEATURES: The 34lb motors have a two-blade propeller. The 54lb motors each run a three-blade propeller. All propeller shafts are stainless steel and the props have a weedless design, so you can push the boundaries during your next adventure. All the motors run on 12V power and operate with 5 forward and 3 reverse speeds, which are controlled with the tiller handle throttle..
  • ELECTRIC POWER: 54 lbs thrust, 12 Volt motor, 13-54 Amps / 34 lbs thrust, 12 volt motor, 7.5-34 amps. Battery Not Included. Each motor is suited to boats ranging from small tenders and tinnies up to dedicated estuary and inshore sportfishing boats..
  • VERSATILE TRANSOM MOUNT: The compact and stylish new Venom motor head design incorporates a new thicker ergonomic grip for the tiller handle. The new head design also includes a digital voltage meter display, so you can keep track of your batte....
Check Stock

Hitachi 49C60 LVDS Cable Ribbon (Main Board to Panel)

  • Carbon motor brushes are one of the most components for power tool. Fit for electric hammer, electric drill, angle grinder, etc..
  • Carbon motor brushes are one of the most components for power tool like electric drill..
  • Worn brushes are often the cause of a poorly running motor.
  • Replacing brushes can fix an intermittent motor..
  • New brushes can restore a motors electric braking Used widely for various of power tools and electric motors, such as rotary hammer drill, circular saw, cut-off saw and angle grinder..
Check Stock

Watersnake 3 Blade Propeller Kit for 12 Volt Motors

  • COMPATIBILTY: This boat propeller is compatible with Watersnake electric trolling 12 volt Assault and Venom motors..
  • QUALITY: Our Watersnake electric motors are increasing anglers’ catches in more than 30 countries. You’ll see our motors attached to the bows of tournament bass boats, mounted on family fishing boats, locked onto the transoms of the traditional tinny and even powering modern kayaks and canoes. We try to keep things simple at Watersnake and so every day our team focuses on just one thing: making better motors..
  • DURABLE: Watersnake Trolling motor propeller replacement kit is durable and made to last. Designed to chew through the heaviest of underwater grasses and marsh while maximizing thrust to provide speed and efficiency in the water..
  • KIT INCLUDES: Propeller, propeller nut and shear pins..
Check Stock

Stainless Steel Trade Size D (5\ x 5\) Slotted Shim Assortment (260 Pieces), Inch, With Case

  • Assortment includes 260 trade size D (5" x 5") slotted shims in a variety of thicknesses.
  • Slot width is 1-5/8" to align or level components on motors, pumps, generators, and other machinery.
  • Made of 300-series stainless steel for corrosion resistance.
  • Comes in a metal case for organized storage.
Check Stock

MG Chemicals 419D Acrylic Conformal Coating, Clear Finish, 12 oz. Aerosol

  • Urethane conformal coating is a durable finish product that provides a protective coating for printed circuit boards against moisture, corrosion, and thermal shock.
  • It protects and insulates electrical and electronic components and assemblies, including generators, motors, transformers, relays, and solenoid coils.
  • For spraying, liquid can be thinned using M.G. Thinner Cleaner.
  • Thin up to one half part thinner to one part coating.
Check Stock

One Pound of 24 Gauge Magnet Wire for Science Projects | Copper Wire Enameled Temperature Rated 356 F School and Lab Experiment

  • High Quality 24 AWG Enameled Copper Wire. Great for Science Projects, Personal Projects or Crafting, Winding Wire, Speaker Wire, Generators and Motors.
  • Rated Working Temperature: 356 Degree Fahrenheit.
Check Stock

DEWALT Die Grinder, 1-1/2-Inch (DWE4887)

  • 4.2 amp, 25,000 rpm motor of the die grinder provides high power and speed for all 1-1/2-inch grinding applications.
  • AC/DC capacity pf the electric die grinder works off welding machines and generators for increased productivity and versatility.
  • DEWALT die grinder has a convenient paddle switch with lock-on button for easy gripping.
  • Precision 1/4-inch collet securely holds all proper accessories (1/8-inch reducing sleeve as optional accessory).
  • 4.2 Amp, 25,000 rpm motor provides high power and speed for all 1-1/2" grinding applications.
  • AC/DC capacity works off welding machines and generators.
  • Paddle switch with lock-on button for easy gripping.
  • Precision 1/4" collet securely holds all proper accessories (1/8" reducing sleeve as optional accessory).
Check Stock