Top Electric Servo Board
G.T. Power Servo Tester Multi 3CH ECS Consistency Speed Controler Checker CCPM Master for RC Helicopter Car Boat
- ★ Aluminum shell, durable and lightweight, easy to operate buttons. A new upgraded servo tester..
- ★ 3 modes to check servos or ESC, manual mode, neutral mode, automatic “window wiper” mode, you can manage the servo tester as your need..
- ★ You can also connect 1-3 ESC to test and compare their reaction time respectively..
- ★ GT Power Servo Tester can connect 3 servos of the CCPM helicopters, adjust the helicopters and select servos, multi-function..
- ★ The device also can be used as a signal generator for electric speed controller (ESC). With it, you can test your motor system without using a transmitter and receiver..
Check StockELECROW Sensor Kit Compatible with Microbit, Crowtail Programming Learning Electronics Kit, Coding Kit for Programmer (Micro:bit NOT Included)
- [Micro:bit Starter Kit] The electronic starter kit for Micro: bit can work with you for a lot of interesting things and brings endless possibilities to your Micro: bit. NOTE: Micro: bit board is not included..
- [What You Can Get] This kit includes more than 20 modules like the buzzer, touch sensor, servo, ultrasonic ranging sensor, etc. The kit also provides you plenty of fun experiments so you can learn how the electric modules work and use it to build innovative works and plan out unique projects..
- [Plug & Play Modules] All of the Crowtail modules have a standard 4 pin connectors, so it’s easy to plug them into the base shield to realize your ideas. Plug and play, no troublesome soldering and no complicated wiring..
- [Step by Step] More than 20 creative tutorials teaches you to use the Micro: bit and sensor step by step..
- [Crowtail] Crowtail is composed of a series of open source electronic sensor modules. Each electronic module is composed of a circuit board with integrated sensors and a standard 4pin connection terminal. It can be used without breadboards and other complicated operations. It is convenient and quick to build a project..
Check Stock6Pcs ShareGoo JR Style Servo Splitter Cable, 2.75' Servo 1 Male to 2 Female JR Y Harness Y Cable Extension Wire for RC Models Car Airplane Helicopter Drone Boat
- Used for RC cars trucks airplanes helicopters rc boat servo connection, receiver connection and flight control board..
- This servo Y-cable allows you to control two servos with one radio channel..
- Material: 22AWG silicone wire.Wire Length: 7CM/2.75".
- 3Pin wire cable.Male JR plug to 2 Female JR plug Y Harness cable..
- Pack of 6 JR style servo splitter cable,unique design, professional quality JR style connectors..
Check StockArduino Uno 3 Ultimate Starter Kit Includes 12 Circuit Learning Guide
- This is the ultimate Arduino Uno kit enough to get you started with hundreds of arduino projects.
- Bread Board — Holder — Jumper Wires — USB Cable — LEDs — DC Motor — Small Servo — Relay.
- Includes a total of over 190 electronic parts and components.
Check Stocksb components Motor Driver Board for The BBC Micro bit 2 Channel DC Motors and 3 Channel Servos Motors Motor Driver for Micro bit BBC microbit Motor Driver Board
- micro:bit edge connector, directly pluggable.
- 2x DC motor interfaces, 3x servo interfaces.
- Integrates 5V regulator, up to 3A output current.
- Onboard multi connector options for DC motors in different specifications, onboard standard servo headers.
Check StockKEYESTUDIO 16-Channel 12-bit Servo Motor Driver Board I2C Interface for Arduino
- This expansion board can directly stack on the controller R3 board and can drive up to 16 servos.
- Uses I2C input, just occupy A4 and A5 interface on the control board.
- Contains PCB double sided holes, can direct to solder with components to build up prototyping circuits.
- Servo power supply independent V + input up to 6V.
- How to use: Search for "keyestudio wiki KS0258" in Google Chrome to get the wiki online tutorial for this product..
Check StockVEVOR Fabric Cutter 125mm Rotary Fabric Cutter 39mm Cutting Height Wireless Electric Rotary Cutter All-Copper Motor with Low Noise Adjustable Speed Electric Scissors for Cutting Fabric and Cotton
- ...d with a protective cover. The thicker design is safer and prevents accidental injury. Miniature high torque servo motor as a power system, no carbon brush sparks can be applied in places with open flame restrictions, eliminating fire hazards..
- 【SHARPENING DEVICE】- The electric rotary cutter is designed with a sharpening stone device. The sharpening stone can be replaced as needed without disassembling the blade, which is fast and convenient..
- 【WIDE APPLICATION】- The electric scissors for cutting fabric is essential equipment for the garment, umbrella, and shoemaking industries. The electric fabric cutter machine has a wide range of cutting, such as cotton, wool, silk, chemical fiber, leather, and other fabrics..
Check StockTeam Associated 1/10 Rival MT10 4WD Monster Truck Brushless RTR, ASC20516
- Team Associated 20516 - Rival MT10 1/10 4WD Off-Road Monster Truck RTR.
- Features: 2.4GHz 2-channel radio system High-Torque digital servo with spring-style servo saver Powerful Reedy 3300kV 4-pole brushless motor Three sealed gear differentials 12mm hex wheels inspired by Method Race Wheels Threaded, oil-filled, coil-over shock absorbers 4mm heavy-duty adjustable steel turnbuckles Durable slider-type drive shafts Factory-finished RIVAL monster-truck-inspired High-traction, all-terrain tires Water-resistant high-power Reed.
- Specs: Scale: 1:10 Power: Electric Length: 507mm (20.0") Width: 325mm (12.8") Weight: 2.80kg (6.1 lb) Wheelbase: 225mm (8.86") Transmission Ratio: 2.85:1.
- Part number(s) included (in factory packaging): 20516.
Check StockMKS SERVO42C NEMA17 Closed Loop Stepper Motor Driver Low Noise for CNC 3D Printer Prevent Losing Steps Compatible with Gen L SGen L SKR 2 / V1.4 Turbo BTT Octopus V1.1 Mainboard
- MKS servo42C is a product developed by MKS to meet market demand. The closed-loop motor uses the motor's rotation angle feedback to the drive circuit to detect whether every step that should be taken has been taken to prevent losing steps. If a closed loop occurs, the motor will make up or lose steps through the feedback information, and the blue LED on the closed loop module will light up..
- Support 1-256 subdivision,odd subdivision (such as 11 subdivision) is also available. And support motors with 0.9 degree or 1.8 degree. Maximum speed 1000RPM. With usart interface, you can connect the computer by serial port, for parameter adjustment and query..
- Position /speed/torque closed-loop, it can run at high speed without losing step. Easy to install and wire. The max printing speed can reach 150-180mm/S. Field-Oriented control, low noise, low vibration and low calorific. 4 Half bridge driver with 8 MOSFET, high operating efficiency. 14Bits magnetic encoder, high angle resolution..
- Compatible with Gen L SGen L, SKR 2 / V1.4 Turbo BTT Octopus V1.1 Motherboard and other board which is seperated with drivers, that means drivers is not soldered onto the board.
- Package: 1*MKS SERVO42C(include motor) + 1*Adapter board(MKS APT) + 1*60cm 6pin Data Cable . (User metho....
Check StockBarnabas Robotics Servo Motor Tester Kit | 180 Degree 9g Servo Motor + RC Servo Tester Controller + 6V Battery Holder
- [CONVENIENT, ALL-IN-ONE KIT FOR TESTING SERVO MOTORS] Experiment with servo motors with this all-inclusive kit. Includes 9g servo motor + servo tester controller + 6V battery holder at a low price!.
- [9G Servo Motor] 180 degree range of motion. Includes 3 types of servo horns..
- [4 CELL x AA BATTERY HOLDER] Fits 4 x AA batteries, which produces 6V for your servo tester and servo motors..
- [SERVO TESTER] Includes 3 modes to test servo motors or ESC.
- [GREAT FOR RC APPLICATIONS] Use as a power source for robotics, RC cars, helicopters, planes, boats and or any hobby projects.
Check StockWEISHUJI 25T Servo Horn Steering Arm, Servo Horn 25T Steering Arm, Aluminum 25T Servo Horn Steering Arm for Traxxas TRX4 Axial SCX10 Tamiya 1/10 RC Crawler Truck (Red-Black)
- 25T Servo Horn Steering Arm fits for Traxxas TRX4 Axial SCX10, SCX10 ii 90046 1:10 scale rc crawler, and Servo Horn 25T Steering Arm is CNC machined..
- 25T Servo Horn Steering Arm has 18mm and 22mm threaded mounting holes for adjustability, and Servo Horn 25T Steering Arm is of high quality..
- 25T Servo Horn Steering Arm is Red-Black, and Aluminum 25T Servo Horn Steering Arm is of small size and lightweight..
- 25T Servo Horn Steering Arm works on Futaba, Savox, Emax, HSP, Power HD, Xcore, Aluminum 25T Servo Horn Steering Arm works on other popular prand servos motor (Except Hitec and JR Servos)..
- Package of 25T Servo Horn Steering Arm includes: 1 x 25T Servo Arm (Red-Black), Servo Horn 25T Steering Arm, Aluminum 25T Servo Horn Steering Arm.
Check StockWEISHUJI 10PCS 25T Aluminum Servo Horns Arms, M3 Threads Metal Steering Arm for Towerpro, HSP, HD power, Futaba, Axial, Savox, Xcore, Standard Servos Motors, MG995 MG996R MG946R, S3003 etc servo (Red)
- 25T Aluminum Servo Horns Arms are suitable for mostly 25T Standard Servo Motor, and M3 Threads Metal Steering Arm is compatible with Towerpro HSP HD power Futaba Axial Savox Xcore Standard Servos Motors MG995 MG996R MG946R S3003 etc servo..
- 25T Aluminum Servo Horns Arms are made of strong aluminum, 25T Aluminum Servo Horns M3 Threads are hard to break..
- 25T Aluminum Servo Horns Arms are of dimension 35x15x6mm, and Metal Steering Arm behaves very well on your RC models..
- 25T Aluminum Servo Horns Arms are djustable type servo arm, and M3 Threads Metal Steering Arm have two steel bolts to secure the split-clamp onto the servo output..
- Package of 25T Aluminum Servo Horns Arms include: 10 x 25T Aluminum Servo Horn-Red, M3 Threads Metal Steering Arm, 25T Aluminum Servo Horns M3 Threads some hardware.
Check Stock