Top Electric Trailer Jack

Weize 3500 Lb Power Tongue Jack Heavy Duty Electric Trailer Jack with 600D Polyester Protective Cover 23-5/8 Lift 12V DC

  • Durable and Sturdy: Heavy-gauge steel construction ensures durability and strength.
  • Black powder coat finish resists rust and corrosion.
  • Durable, textured-housing prevents chips and cracks..
  • Weize electric jack lets you raise and lower your A-frame trailer quickly and easily. 3,500 lbs. lift capacity, a low maintenance 12V DC electric gear motor. Provides 18” lift, retracted 9 inch, extended 27”, drop leg extra 5-5/8” lift. Outer tube dia.: 2-1/4", inner tube dia.: 2"..
  • To ensure great performance even at night, this jack also comes with a front-facing LED light .The light is directed at a downward angle allowing for easy deployment and retraction of the jack in low-light settings. The unit also comes with a manual crank handle in case you lose power..
  • Come with electric tongue jack protective cover: the cover measures 14″(H) x 5″(W) x 10″(D), it can work with most electric tongue jacks. 600D Polyester Fabric features high tear strength, that is durable and long lasting. Adjustable both-side pulling drawstring with barrel cord lock holds the cover securely in place, keeps your electric tongue jack dry and protects the casing, switches, and light from the elements..
  • Warranty: Meets international quality standards. 1 YEAR WARRANTY, don't h....
Check Stock

RVMATE Electric A-Frame Trailer Jack up to 3500lbs Heavy Duty RV Electric Power Tongue Jack with Accessories Manual Crank Handle and Level, 18" Lift, 12V DC and Bright LED Lights, Black

  • 【WHAT ARE INSIDE THE BOX】1PC Electric A-Frame Jack , 3PC Flat&Star Washers, 1PC Manual Crank Handle, 1PC Level and 1SET Instruction Manual. Red wire(+) connect to 12-volt power source..
  • 【DURABLE AND STURDY】Made of heavy duty steel, the electric A-frame trailer jack is rated capacity up to 3500LBS. Durable exterior black powder-coat finish on outer tube and zinc finish for inner tube with removable footplate will provide good surface protection and greatly reduce the rusty risks..
  • 【TERRIFIC FEATURES】The purpose is for use with trailers with a A-frame coupler by wiring to 12-volt power source. The maximum travel is 18in. the standard tube diameter for a-frame trailer jacks is 2.25 inches, and the drop leg travel is 5-5/8in. Four holes on the footplate bracket are for height adjustment by securing with the locking pin. Bright LED lights are illuminated for night time..
  • 【TIME-SAVING】Just push the UP switch to extend the jack until the footplate touches the ground. Retract the jack by pushing the DOWN Switch. The jack will slow down and stop as it approaches the fully retracted position. Release the swit....
Check Stock

CURT 28112 Marine Boat Trailer Jack with 6-Inch Wheel 1,200 lbs 11 Inches Vertical Travel

  • DEPENDABLE STRENGTH. This boat trailer jack is rated to support up to 1,200 lbs. trailer tongue weight, and it comes with bolt-on mounting hardware to....
  • CONVENIENT MOBILITY. For easier coupling and positioning of your boat trailer, this jack comes with a 6-inch diameter trailer jack wheel.
  • EASY OPERATION. This trailer tongue jack allows for 11 inches of vertical movement and operates using a side-wind handle (12-1/2-inch retracted....
  • SWIVEL DESIGN. To ensure plenty of clearance while towing your trailer, this trailer jack stand is equipped with a swivel bracket. The jack swings up....
  • CORROSION-RESISTANT. For long-lasting corrosion resistance against water, dirt, road salt and more, this marine boat trailer jack is protected in a....
Check Stock

CURT 28156 Marine Boat Trailer Jack with 6-Inch Wheels, 1,500 lbs. 10-3/8 Inches Vertical Travel

  • DEPENDABLE STRENGTH. This boat trailer jack is rated to support up to 1,500 lbs. trailer tongue weight, and it comes with bolt-on mounting hardware to readily attach to the trailer tongue.
  • CONVENIENT MOBILITY. For easier coupling and positioning of your boat trailer, this jack comes with dual 6-inch diameter trailer jack wheels.
  • EASY OPERATION. This trailer tongue jack allows for 10-3/8 inches of vertical movement and operates using a side-wind handle (12-5/8-inch retracted height, 23-inch extended height).
  • SWIVEL DESIGN. To ensure plenty of clearance while towing your trailer, this trailer jack stand is equipped with a swivel bracket. The jack swings up and out of the way for towing and features a heavy-duty pull pin to securely lock into place.
  • CORROSION-RESISTANT. For long-lasting corrosion resistance against water, dirt, road salt and more, this marine boat trailer jack is protected in a durable zinc-plated finish.
Check Stock

Boat Trailer Jack,Heavy Duty Trailer Jack with 6 Inch Dual Wheels,1500 lbs Swivel Trailer Tongue Jack,Bolt-on Trailer Jacks,10\ Vertical Travel, Black

  • 【Corrosion Resistant Finish&Bearing Capacity】Boat Trailer Jack body is made of high quality black powder-coat corrosion-resistant steel,Zinc finish on the rest.Overall heavy-duty steel structure, reliable strength, long-lasting corrosion resistance.Features 1500 pound bearing capacity..
  • 【Adjustable Height&Easy to Operate】 This trailer tongue jack allows 10 inches of vertical movement (12.6 inches retracted height, 22.6inches extended height).The ergonomic hand crank handle is easy to grasp and comfortable to hold,which allows you to easily swing jack in place,The height of the whole dual wheel jack will can be stretchable from 24.8inch to 34.8inch..
  • 【Double Wheel Design】 For easier coupling and positioning of your boat trailer,each boat trailer jack is equipped with 6inch diameter double wheel at the base, can rotate 360 degrees,giving your trailer enhanced maneuverability without requiring you to fully lift up the trailer tongue.Compared with most wheels on the market, dual wheel trailer jack wheel replacement is stronger and more stable..
  • 【Swivel Plate & Pull Pin Design】 For increased safety while towing and ease of use, this trailer jack stand is equipped with a swivel bracket,can 360° swivel.the jack swings up and out of the way for....
Check Stock

CURT 28204 A-Frame Trailer Jack, 2,000 lbs, 15 Inches Vertical Travel , Black

  • DEPENDABLE STRENGTH. This A-frame trailer jack is rated to support up to 2,000 pounds trailer tongue weight.
  • VERTICAL RANGE. This trailer tongue jack allows for 15 inches of vertical movement and can be fully retracted for towing (9-1/4-inch retracted height, 24-1/4-inch extended height).
  • EASY OPERATION. This trailer tongue jack features a side-wind handle for easy operation. The handle also has an integrated grip for comfortable handling when raising and lowering the trailer coupler.
  • CORROSION-RESISTANT. For long-lasting corrosion resistance against water, dirt, road salt and more, this trailer jack is protected in a durable black powder coat and zinc-plated finish.
  • SECURE INSTALL. This A-frame trailer jack can be bolted into place or welded onto the trailer tongue (hardware not included).
Check Stock

CURT 28250 A-Frame Trailer Jack 5,000 lbs 14-1/8 Inches Vertical Travel

  • DEPENDABLE STRENGTH. This A-frame trailer jack is rated to support up to 5,000 pounds trailer tongue weight.
  • VERTICAL RANGE. This trailer tongue jack allows for 14-1/8 inches of vertical movement and can be fully retracted for towing (10-3/8-inch retracted height, 24-1/2-inch extended height).
  • EASY OPERATION. This trailer tongue jack features a top-wind handle for easy operation. The handle also has an integrated grip for comfortable handling when raising and lowering the trailer coupler.
  • CORROSION-RESISTANT. For long-lasting corrosion resistance against water, dirt, road salt and more, this trailer jack is protected in a durable black powder coat and zinc-plated finish.
  • SECURE INSTALL. This A-frame trailer jack can be bolted into place or welded onto the trailer tongue (hardware not included).
Check Stock

CURT 28356 Weld-On Pipe-Mount Swivel Trailer Jack, 5,000 lbs. 15 Inches Vertical Travel

  • DEPENDABLE STRENGTH. This trailer jack is rated to support up to 5,000 pounds trailer tongue weight.
  • SWIVEL DESIGN. To ensure plenty of clearance while towing your trailer, this trailer jack stand is equipped with a swivel bracket. The jack swings up and out of the way for towing and features a pull pin to securely lock into place.
  • EASY OPERATION. This trailer tongue jack allows for 15 inches of vertical movement and operates using a top-wind handle (16-1/2-inch retracted height, 31-1/2-inch extended height). The integrated grip allows for easy raising and lowering.
  • CORROSION-RESISTANT. For long-lasting corrosion resistance against water, dirt, road salt and more, this trailer jack is protected in a durable black powder coat and zinc-plated finish.
  • SECURE INSTALL. This trailer tongue jack is designed to mount onto the trailer frame with a weld-on installation. It comes with a raw steel pipe bracket for ready welding.
Check Stock

TYT 2000lbs Boat Trailer Jack, Heavy Duty Swivel Trailer Jack with 6 Inch Dual Wheels, 12 inches Lift, Zinc-Plated Finish for Boat, RV, Trailer, Camper

  • 【Efficient and Durable Trailer Jack】: Featuring dual sturdy 6-inch poly wheels and a heavy-duty steel construction, this trailer jack can lift up to 2000 lbs with ease. The outer tube has a diameter of 2.5 inches and can provide a maximum lifting height of 12 inches, making it a perfect fit for most trailer tongues. The package size is 65cm*17cm*17cm, with a weight of only 8.35 kg..
  • 【Bolt-On Mounting Hardware】: This trailer jack comes with bolt-on mounting hardware, making it easy to attach to the trailer tongue. The jack capacity is 2000 lbs, ensuring that it can handle most trailer lifting needs..
  • 【Easy to Operate】: This trailer jack features a side-wind handle that allows for smooth and easy operation. The jack can be adjusted to fit specific operation requirements, with a retracted height of 26 inches and an extended height of 38 inches..
  • 【Heavy Duty Material】: Made from heavy-duty steel, this boat trailer jack provides an excellent mounting facility. It is protected with a durable zinc-plated finish, ensuring long-lasting corrosion resistance against water, dirt, road salt, and more..
Check Stock

CURT 28300 Weld-On Bracket-Style Swivel Trailer Jack, 2,000 lbs. 10-1/2 Inches Vertical Travel

  • DEPENDABLE STRENGTH. This trailer jack is rated to support up to 2,000 pounds trailer tongue weight.
  • SWIVEL DESIGN. To ensure plenty of clearance while towing your trailer, this trailer jack stand is equipped with a swivel bracket. The jack swings up and out of the way for towing and features a pull pin to securely lock into place.
  • EASY OPERATION. This trailer tongue jack allows for 10-1/2 inches of vertical movement and operates using a top-wind handle (11-1/2-inch retracted height, 21-1/2-inch extended height). The integrated grip allows for easy raising and lowering.
  • CORROSION-RESISTANT. For long-lasting corrosion resistance against water, dirt, road salt and more, this trailer jack is protected in a durable black powder coat and zinc-plated finish.
  • SECURE INSTALL. This trailer tongue jack is designed to mount onto the trailer frame with a weld-on installation. It comes with a raw steel bracket for ready welding.
Check Stock

CURT 28354 Weld-On Pipe-Mount Swivel Trailer Jack, 5,000 lbs. 10 Inches Vertical Travel , Black

  • DEPENDABLE STRENGTH. This trailer jack is rated to support up to 5,000 pounds trailer tongue weight.
  • SWIVEL DESIGN. To ensure plenty of clearance while towing your trailer, this trailer jack stand is equipped with a swivel bracket. The jack swings up and out of the way for towing and features a pull pin to securely lock into place.
  • EASY OPERATION. This trailer tongue jack allows for 10 inches of vertical movement and operates using a side-wind handle (10-1/4-inch retracted height, 20-1/4-inch extended height). The integrated grip allows for easy raising and lowering.
  • CORROSION-RESISTANT. For long-lasting corrosion resistance against water, dirt, road salt and more, this trailer jack is protected in a durable black powder coat and zinc-plated finish.
  • SECURE INSTALL. This trailer tongue jack is designed to mount onto the trailer frame with a weld-on installation. It comes with a raw steel pipe bracket for ready welding.
Check Stock

CURT 28358 Weld-On Pipe-Mount Swivel Trailer Jack, 5,000 lbs. 15-1/2 Inches Vertical Travel

  • DEPENDABLE STRENGTH. This trailer jack is rated to support up to 5,000 pounds trailer tongue weight.
  • SWIVEL DESIGN. To ensure plenty of clearance while towing your trailer, this trailer jack stand is equipped with a swivel bracket. The jack swings up and out of the way for towing and features a pull pin to securely lock into place.
  • EASY OPERATION. This trailer tongue jack allows for 15-1/2 inches of vertical movement and operates using a side-wind handle (15-5/8-inch retracted height, 31-1/4-inch extended height). The integrated grip allows for easy raising and lowering.
  • CORROSION-RESISTANT. For long-lasting corrosion resistance against water, dirt, road salt and more, this trailer jack is protected in a durable black powder coat and zinc-plated finish.
  • SECURE INSTALL. This trailer tongue jack is designed to mount onto the trailer frame with a weld-on installation. It comes with a raw steel pipe bracket for ready welding.
Check Stock