Top Electrical Flexible Laminates

DAILISEN Self Adhesive Floor & Door Flat Transition Strip Vinyl Floor Edge Trim Laminate Floor Gap Covering Joining Strip 78.7in L x 1.96in W Grey Wood Grain

  • 【Self-adhesive Installation】: The back of the floor gap covering strip is affixed with strong double-sided acrylic tape, which can be installed by tearing off the surface protective film..
  • 【Product application】: The product is mainly used for covering the gaps between wood floors and wood floors, between laminates and laminates, and between wood floors and tiles to prevent floor gaps from expanding and floor movement..
  • 【Installation steps】: Please clean the floor before installation to keep the floor clean. Then peel off the protective film on one side of the tape and install it in the designated position. Press the floor strips while removing the tape until the installation is complete. There is no need to drill holes in the floor or tile during installation, and it will not damage the floor or tile. Can be freely cut as needed..
  • 【Tip】: 4cm wide floor strips are recommended to cover gaps within 1cm, and 5cm floor strips are recommended to cover gaps within 1.5cm. Not recommended for use as a threshold transition strips. During transportation, the tape may be blistered, but it will not affect the use. If you mind, please purchase with caution. Due to the light, the product picture may be different from the actual color..
Check Stock

THINGAMEJIG QT25.SCRIB Scribing Tool

  • Scribes laminates, painted items, stone, soft metals , timber,.
  • scores the surface and prevents chipping or breakouts on laminates metrical..
  • accurate every time due to locking nut and easy adjustment.
Check Stock

Vic Firth Heavy Hitter Quadropad - Small (HHPQS)

  • Enables quiet practice and an authentic playing experience for marching tenors.
Check Stock

Vic Firth Laminate for Quadropad Large

  • Heavy duty, replaceable mylar laminates simulate the response and feel of a high-tension marching drum.
  • Replacement laminates for Vic Firth Quadropad.
Check Stock

Woodhead 35931 Pulling Grip, Medium Duty, Flexible Eye, Short Length, 3400lb Approximate Break Strength, 14.00\ Mesh Length, .50–.74\ Cable Diameter

  • Electrical Cable Support: pulling grip is a flexible holding device that helps to pull or remove electrical wirings, synthetic ropes, optical fibers, etc. This wire grip helps to dissipate the cable tension over a large area, protecting the cables from damage.
  • Flexible Mesh Grip: the offset eye design of this cord grip allows an easy attachment to the pulling line. This mesh support grip is flexible enough to work well in both large and confined spaces.
  • Applications: this cable support grip can easily fit single or a bundle of cables and is used for pulling cable in different overhead or underground applications, stringing service, pulling wire through conduit, and for underground electrical pulls.
  • Durability: mesh grip is made with high-quality galvanized steel that provides maximum strength to the cable connections along with resistant to corrosion. This adds to the durability of flexible cable grip.
  • Specifications: short length cable support grip features 14 in. mesh, double weave and split lace design with 0.50-0.74 in. cable diameter. It has a break strength of approximately 3400 lb..
Check Stock

Woodhead 35935 Pulling Grip, Medium Duty, Flexible Eye, Short Length, 8100lb Approximate Break Strength, 26.00\ Mesh Length, 1.50–1.99\ Cable Diameter

  • Electrical Cable Support: pulling grip is a flexible holding device that helps to pull or remove electrical wirings, synthetic ropes, optical fibers, etc. This wire grip helps to dissipate the cable tension over a large area, protecting the cables from damage.
  • Flexible Mesh Grip: the offset eye design of this cord grip allows an easy attachment to the pulling line. This mesh support grip is flexible enough to work well in both large and confined spaces.
  • Applications: this cable support grip can easily fit single or a bundle of cables and is used for pulling cable in different overhead or underground applications, stringing service, pulling wire through conduit, and for underground electrical pulls.
  • Durability: mesh grip is made with high-quality galvanized steel that provides maximum strength to the cable connections along with resistant to corrosion. This adds to the durability of flexible cable grip.
  • Specifications: short length cable support grip features 26 in. mesh, double weave and split lace design with 1.50-1.99 in. cable diameter. It has a break strength of approximately 8100 lb..
Check Stock

65.6ft 18 Gauge Electrical Wire, Low Voltage Stranded Wires, 2 Pin Red Black Flexible Electric Wire, Black Electrical Cable, Tinned Copper Hookup Wire for Led Strip Lighting Automotive

  • ★【Durable Material】- The jacket/insulation materials are PVC(RoHs), which protects the wire against abrasion, resistant to sunlight and chemicals. The rated operating temperature up to 80℃/176℉..
  • ★【High Conductivity】- The Strands copper wire are inside each circuit. High precision Oxygen-free copper conducts electricity well. Compared with aluminum materials, the Electrical Wire has lower resistance and higher conductivity..
  • ★【More Flexible】 - The electrical cable is made of top premium silicone, strong toughness and not easy to break, suitable for various work. This Silicone wire is more flexible, easy to strip and crimp..
  • ★【Widely Used】- Our 65.6 feet (About 20M) stranded copper wire can be used for all single color LED strip lights, various DC electrical hookups including Radios, transformer, electronics, electrical appliance and equipment, motor lead wire connection, other low voltage (5V-12V-24V) products installations..
  • ★【What You Get】- 65.6 feet (About 20M) 18 AWG Gauge electrical wiring. And our friendly customer service..
Check Stock

BOSCH U503 3-Piece Assortment U-shank Jig Saw Blade Set for Laminate Flooring

  • Includes two U1BIF special for laminates, and one U1AOF special for scrolling in laminates.
  • Precisely ground teeth for clean, fast cuts in laminate flooring and other abrasive materials.
  • U-shank design fits some professional and most consumer jig saw brands.
Check Stock

FastCraft 14pc Multi Tool, Oscillating Tool Kit, PRO Saw Model 86225-1 (5.0Amp PEAK GUARANTEED POWER Rated 2.4A Keyless Blade Change 6 Speeds 3-4 Angle Cutting + 13pc Blades/Carbide PRO Grade - BULK PACKAGING [No Box] FastCraft the High End Brand at Costco

  • ... metals like cast iron, and fiberglass.
  • --- (2) Bi-metal steel blade (wood/plastic/soft metal) - Best for cutting: hard/soft wood, demolition (nail-embedded wood), sheet metal and pipe cutting, plastic, drywall.
  • (1) 3-1/2" Bi-metal half moon blade (wood/plastic/soft metal) - Best for cutting: soft metal, wood, wood laminates, softer plastics, drywall, carpet,.
  • --- (2) 3-1/2" HCS SK5 steel half moon saw blades (wood/plastic) - Best for cutting: wood, wood laminates, softer plastics, drywall, carpet, (5) HCS SK5 steel saw blades (wood/plastic) - Best for cutting: wood, wood laminates, softer plastics, drywall, carpet.
  • (2) HCS sk5 steel E-Cut saw blades (wood/plastic) - Best for cutting: wood, wood laminates, softer plastics, drywall, carpet. Bulk Packaging [No Clamshell Packaging].
Check Stock

Kable Kontrol PVC Electrical Tape - 66 Feet Length -18 mm Wide 10 Pcs/pack - Yellow

  • DIMENSIONS – Length – 66’ Feet Per Roll | Width – 3/4" Inch | Thickness – 7 Mil | Color – Yellow | Material – Polyvinyl Chloride (PVC) |....
  • MATERIAL – The electrical tape is made from heavy-duty polyvinyl chloride (PVC). This tape can be used up to 600 V and can handle temperatures up to....
  • MULTIPURPOSE – Kable Kontrol’s electrical tape is highly versatile making it the ideal product for electrical splicing, cable insulation, wire....
  • EASY TO USE – This electrical tape is extremely user friendly, durable, and flexible. Ensure that the cables are dust-free for optimal application....
  • QUALITY - This great quality electrical tape has become trusted by industry professionals for everyday usage..
Check Stock

CMT P10080 5/8\ Bore ITK Melamine & Ultra Finish Saw Blade, 10\ x 80 Teeth

  • For crosscuts, fine finish on two-sided laminates without using scoring blades.
  • Use on radial arm, miter and table saws for cutting wood, moldings, melamine, laminates, chipboard.
  • 0.094 kerf thickness, 0.063 plate thickness, 10Degree hook angle.
  • Thin kerf reduces material waste, shear angle produces smooth cuts and improves cutting speed.
  • Special Carbide prevents from material failure, Non-Stick Orange Shield protects against corrosion.
Check Stock

Flexible Shaft Bits, Snake Shape Screwdriver Connect Link, 1/4\ Hex Shank Extention Screwdriver Bit Holder Connect Link Power Tools(Red)

  • HIGH QUALITY - The screwdriver connect link is made of high‑quality materials, which is reliable and durable in use.
  • FUNCTION - The drill flexible shaft is mainly used in computer chassis, electrical cabinets, furniture, electrical appliances and other narrow space screwdriver can not work in an environment operations.
  • WIDELY APPLICATION - This Flexible shaft can be used for general formula hand drill chuck, it can also be used for electric screwdriver.
  • BRAND NEW - 100% brand new high quality flexible shaft bits, strictly full tested to ensure the best quality before shipment, safe to use.
  • PRACTICAL - The design is clever, suitable for all kinds of dead corners, practical and wide application. Flexible shaft head can be mounted hexagonal shank (1/4 handle).
Check Stock