Top Electrical Metallic Tubing Reducing Fittings

(2\ Dia x 50 ft) HydroMaxx® Flexible PVC Non Metallic UL Liquid Tight Electrical Conduit Kit with 2 Straight and 2 Angle Fittings Included

  • Non Metallic Flexible Liquid Tight Conduit with 2 Free Straight and 2 Free Angle Fittings.
  • Conduit is Flexible - Can be used in extremely Tight Quarters, Light Weight - Lower Installed Costs.
  • Liquid Tight Conduit Resists Corrosion, Oil and Water, Smooth Inside for Easier Wire Pulling, Resists Crushing and Stretching,Outdoor Sunlight Resistant.
  • These Non-Metallic connectors are molded of Type Nylon 6, O Ring and Steel Lock-nut included, for Indoor and outdoor use.
  • No Threading of Conduit Required to Install, No Disassembly Required (Just Push Tubing onto Fitting).
Check Stock

(1\ Dia x 50 ft) HydroMaxx® Flexible PVC Non Metallic UL Liquid Tight Electrical Conduit Kit with 2 Straight and 2 Angle Fittings Included

  • Non Metallic Flexible Liquid Tight Conduit with 2 Free Straight and 2 Free Angle Fittings.
  • Conduit is Flexible - Can be used in extremely Tight Quarters, Light Weight - Lower Installed Costs.
  • Liquid Tight Conduit Resists Corrosion, Oil and Water, Smooth Inside for Easier Wire Pulling, Resists Crushing and Stretching,Outdoor Sunlight Resistant.
  • These Non-Metallic connectors are molded of Type Nylon 6, O Ring and Steel Lock-nut included, for Indoor and outdoor use.
  • No Threading of Conduit Required to Install, No Disassembly Required (Just Push Tubing onto Fitting).
Check Stock

Cantex 1/2 in. Dia. PVC Quick Connect Coupling (5163380C)

  • 1/2 For electrical non-metallic tubing No gluing UL and CSA listed. Bulk. Specifications.
  • Produced with the highest grade materials.
Check Stock

mistcooling 160PSI Misting Pump (220 V-AC)

  • Specs: 160 PSI Mist Pump - 160psi Pump Quiet operation 35DB - self priming - max pressure 200psi pump - Available in 110 V, 220 V & 12 VDC - Thermal Safety Switch - Oil-less Pumps may generate heat, motor manufacturer have installed built-in thermal safety switch to improve the longevity of pumps I DON’T THINK THIS BELONGS WITH THIS PUMP - Standard pump inlet: 3/8 inch push lock Fitting. - Standard Pump outlet: ¼ inch Push- lock fitting..
  • Nozzles - Nickel-plated brass button series - With stainless-steel Orifice - Standard 10/24 inch thread - 0.012 inch Orifice - Rust-resistant fixed impeller pin - 0.014 GPM Flow per Nozzle..
  • Fittings - ¼ inch OD - Push to Connect Fittings - Easily Re-Usable - Black Color Fittings - 10/24 Thread Size - Leak Proof Fittings..
  • Tubing - ¼ inch OD Flexible PE Tubing - Max burst pressure is 300psi at 75 degree F - UV Resistant Flexible Tubing - Black Color - UV Treated..
Check Stock

mistcooling Patio Misting System - 160psi (12VDC-12 Nozzles Kit - W/Out Enclosure)

  • Features: Base 10 Nozzle Kit Includes: - 1- 160 PSI Misting Pump - 12 – Brass/Stainless Steel Misting Nozzles - 12 – Push to Connect Black Color Misting Tees - 1 – Push to Connect Misting Elbow - 1 – Calcium Inhibitor Filter - 30 - ¼ Inch Black Clamps - 50 Feet of Black Tubing - 6 Ft Feed Line.
  • Specs: - 160 PSI Mist Pump - 160psi Pump Quiet operation 35DB - self priming - max pressure 200psi pump - Available in 110 V, 220 V & 12 VDC - Thermal Safety Switch - Oil-less Pumps may generate heat, motor manufacturer have installed built-in thermal safety switch to improve the longevity of pumps I DON’T THINK THIS BELONGS WITH THIS PUMP - Standard pump inlet: 3/8 inch push lock Fitting. - Standard Pump outlet: ¼ inch Push lock fitting..
  • Nozzles - Nickel-plated brass button series - With stainless-steel Orifice - Standard 10/24 inch thread - 0.012 inch Orifice - Rust-resistant fixed impeller pin - 0.014 GPM Flow per Nozzle.
  • Fittings - ¼ inch OD - Push to Connect Fittings - Easily Re-Usable - Black Color Fittings - 10/24 Thread Size - Leak Proof Fittings.
  • Tubing - ¼ inch OD Flexible PE Tubing - Max burst pressure is 300psi at 75°F - UV Resistant Flexible Tubing - Black Color - UV Treated. MC12020-MC12024.
Check Stock

Irrigation Fittings Kit Hoomtry Drip Irrigation Barbed Connectors for 1/4-Inch Tubing Flower Pot Vegetable Garden Lawn（Straight Barbs Tees Elbows End Plug 4-Way Coupling）

  • Plastic 1/4 Irrigation Fittings Kits: 208 Pcs 1/4 inch drip irrigation tubing kits total, 80 straight barbs, 68 three-way pipes, 20 elbow fittings, 20 end plugs and 20 four-way pipe joints, the number is sufficient to meet your needs for garden irrigation accessories various needs..
  • No tool required: The lrrigation fittings kit secure, Easy to install without glue, tools, or clamps. Barbed ends grab tubing for a secure leak-proof connection.
  • Simply push the tubing firmly over the barbs for a very tight fit that won't leak. If desired you may use a heat gun or blow dryer to soften the end of the tubing before inserting..
  • Confirm Drip Irrigation Tubing Size: These irrigation kits are designed with barbs and can be used to connect 1/4 inch drip irrigation pipes. Jumpstart your drip irrigation system installation with this set of essential components for building a maintenance-free drip system.Please check the size carefully before purchasing..
  • Easy to Use: This irrigation fittings kit is made of quality engineering plastics that is durable, strong, water resistant, chemical-resistant for long time using. These drip irrigation accessories work well with the tubing..
  • Excellent customers service: You are not completely satisfied with Hoomtry plastic drip irrig....
Check Stock

B BOSI TOOLS Tubing Cutter, 3/16 to 1-3/8 inch Outer Diameter Heavy Duty Pipe Cutter of Aluminum, Copper, PVC, Thin Stainless Steel Tube

  • 【Large Cutting Capacity】This tubing cutter quickly and easily cuts 3/16" to 1-3/8" copper, brass, aluminum and plastic tubing, precision designed and constructed with thrust bearing feed for smooth cutting action. Each tool is tested to ensure accurate spiral free cutting..
  • 【Clean & Precise Cut】B BOSI TOOLS professional copper pipe cutter set has 6 pieces of individual bearings allowing for increased cutting speed. Precise rolling control makes every cut smoother and more accurate in pipe cutting..
  • 【Easy to Use】Slide the cutting wheel feed mechanism into place, line up the cutting wheel with the cut line and tighten handle, rotate cutter around tube, tighten knob every few turns until wheel cuts through, use reamer to smooth the edges of the cut..
  • 【Widely Application】This convenient tubing cutter combo is a must-have for any toolbox. Ideal for refrigeration and plumbing programs. The cutter allows you to easily cut metallic tubing with a simple one-handed operation..
  • 【Durability & Practicality】Heat treated alloy steel cutting wheel and high-grade steel construction make our heavy-duty copper tubing cutters perfect for plumbing, electrical, air conditioner installation, automotive, and DIY applications..
Check Stock

Bosch SP0F000054 Style Line 2\ Triple Gauge Kit (Black Dial Face, Black Bezel)

  • 2" Triple Gauge Kit with black dial face and black bezel.
  • Oil/Water Temperature SP0F000053, Electrical Voltmeter SP0F000051, and Mechanical Oil Pressure SP0F000052 gauges.
  • Includes 72" high temperature nylon tubing with 1/8" and 1/4" NPT thread fittings.
  • Also includes mounting hardware and 12 volt internal lighting.
  • Only for 12 volt negative ground systems.
Check Stock

iMopo 70 Pack Drip Irrigation Universal 1/4 Barbed End Plug Fittings Barbed Connectors for Drip or Sprinkler System

  • 【Great Value】：Comes with 70 pieces barbed end plug fittings in total,enough to meet your daily use..
  • 【DURABLE MATERIAL】：Made of high-impact,UV-resistant and chemical-resistant materials,durable and reliable to assure a long life using time..
  • 【BARBED DESIGN】：Barbed end plug fittings tight fits universal 1/4" drip tubing,barbed design ensures the tubing will not slip and leak..
  • 【EASY TO INSTALL】:Barbed end plug fitting is easy to be installed without glue, tools, or clamps.Push the tubing firmly over the end plug fitting.Warm tips:Put the tubing end into 75°~85° hot water 10 seconds before pushing them..
  • 【FOR WIDE APPLICATIONS】:Barbed end plug fittings are Great for use with raised garden beds,lawn,greenhouse gardening and agricultural watering applications..
Check Stock

mistcooling Pre-Assembled, Low Pressure System Kit,25' Mist Ring,Recommended for Fans with 30-46'' Di, 25 Inch Diameter 8 Nozzles, Beige Color Tubing

  • 8 - Nickel-plated brass Nozzles, 7 misting Line Tubing,1 - 6 ft feed Line,1 - end elbow, 7 - misting tee, 8 Zip ties.
  • Nozzles:Nickel-plated brass button series ,With stainless-steel Orifice ,Standard 10/24” thread ,in 0.015” OD Orifice ,Rust-resistant fixed impeller pin.
  • Fittings :¼” OD Compression Fittings,Beige Color to blend with most patios and backyards,Compression Type Fittings,Leak Proof.
  • Garden Hose Adapter : ¾” OD, Fits most Garden Faucets ,With Filter Washer to protect your nozzles.
  • Tubing :¼” OD Flexible PE Tubing ,Operating Pressure 40 to 100 PSI ,UV Resistant Flexible Tubing.
  • 25'' Fan Mist Ring with 8 or 10 Nozzles -Recommended for fans with 30-46'' Diameter.
  • Supply Line : 6 Ft Feed Line, Low Pressure tubing , Beige Feed Line.
  • Simply fix to your garden hose and ready to use.
Check Stock

Cimeton 32Pcs Drip Irrigation Tubing Hole Punch & Fittings Kit, Including 2Pcs Drip Irrigation Pipe Hand Puncher 2-in-One Punch Tools with 30Pcs Drip Irrigation Barbed Plugs End Closure Plugs Fittings

  • ❀【Package Included】: Cimeton drip irrigation tubing punch and fittings kit includes 2pcs drip irrigation tube hand punch (1pc professional hole punch and 1pc 2-in-1 punch tool).
  • and 30pcs drip irrigation fittings: 20pcs straight barbed plugs and 10pcs figure 8 end closure plugs, 32pcs in total. This is a practical tool kit to meet your daily gardening and irrigation needs..
  • ❀【Long-Lasting】: Made of durable plastic, these punch tools and irrigation fittings are sturdy and safe, non-toxic, have well performance of water, UV and chemical resistance. And the hole punchers have been polished so it will not become dull, which ensure a longer service life..
  • ❀【Tube Hole Punchers】: Our irrigation tube punchers are designed to fit for drip tubing punch and 1/4" fitting insertion use, match with PE pipes with a diameter of 16/20/25mm. Punch hole size measures approx. 3mm. These tube hole punchers are mainly used to drill holes when installing drippers and micro sprinklers in PE pipe to ensure proper insertion of fittings, tubing and emitters for a tighter fit..
  • ❀【Irrigation Fittings】: Our straight barbed plugs are designed for quick connecting two side of 1/4" drip irrigation tubing or filling into a 1/2" drip irrigation pipe, and the....
Check Stock

Habitech 3-Pack 1/2 Inch Drip Irrigation Tubing to Faucet/Garden Hose Adapter - Reusable Connector Fittings for Most Rain Bird, Orbit, Dig, Toro 1/2 or 5/8 Tubing x 3/4" FHT

  • ... Thickness. PLEASE MAKE SURE YOUR TUBING SPECIFICATIONS FALL WITHIN THESE RANGES FOR THE PROPER FIT. Compatible with many models of Rainbird, Orbit, Dig, Hunter and Toro tubing as well as generic 1/2″ blank drip irrigation tube or drip line. Large fitting ID means less flow restriction..
  • ZERO LEAKS. Power-Loc fittings don’t leak. Barb design ensures tubing will not slip out or blow off at high pressure and temperature. No slippage or leaking, even under high pressure..
  • REUSABLE & LONG LASTING. Unlike other types of fittings, these parts are reusable and may be removed and reinstalled for a long, versatile life. Simply loosen nut to remove tubing. Durable construction provides years of reliable use..
  • PATENTED LOCKING TECHNOLOGY. Power-Loc fittings are quickly revolutionizing irrigation fitting expectations worldwide. The patented locking technology works great under high pressures and around heavy foot traffic. A more rugged alternative to insert and compression fittings, these adaptors have a locking mechanism that is easily tightened after the drip line is pushed on..
Check Stock