Top Electrical Studs - BuyWiseBest.com

Zircon 67324 StudSensor 70 Center Finding Stud Finder with Live AC WireWarning Detection and Built-In Erasable Wall Marker

The Zircon SS 70 electronic stud scanner detects the edges and center of wood and metal studs and alerts you of live AC wires helping you easily find studs and avoid hazards.
StudScan mode locates the edges of wood or metal studs up to 0.75 inches (19 mm) deep.
DeepScan mode locates targets up to 1.5 inches (38 mm) deep.
WireWarning Detection indicates the presence of live, unshielded electrical AC wiring while scanning in StudScan and DeepScan modes.
ACT (Auto Correcting Technology) automatically corrects common user errors, such as when scanning begins over a stud, in both StudScan and DeepScan modes.
“Ready” LED lights to indicate when the stud finder is calibrated and ready for use while the patented SpotLite Pointing System illuminates and the audio tone signal sounds when the stud center is located.
Integrated erasable wall marker enables users to mark targets with the simple push of a button.

##A - ## Pack -- #10-32 Studs where terminals can be stacked up to 1/2".
Flexible red vinyl cover eliminates electrical shorts and prevents corrosion. Durable plastic rustproof housing.
Thermal automatic reset feature, power protected when circuit is overloaded.
For Use On: automotive, electromechanical equipment, vehicle, marine, ATV, RV, yachts and ships, heavy-duty and truck applications, battery chargers, car engines electrical control etc..

Universal mount accommodates screens with mounting patterns up to 29.06¡± W x 17.67¡± H.
Adjustable 15 degrees forward and -5 degrees backward tilt for finding the optimal viewing angle.
Optional IncreLock feature offer fixed tilt angle of -5 degrees , 0 degrees, 5 degrees, 10degrees , 15degrees.
Horizontal screen adjustment of up to 8¡± (depending on screen model) for perfect screen placement.
Adjustable +15/-5 degree tilt for the optimal viewing angle.
Open wall plate design allows for greater access to electrical outlets and cable management.
Mounts to wood studs, concrete, cinder block or metal studs (metal stud accessory required).
Universal mount accommodates screens with mounting patterns up to 29.06¿ W x 17.67¿ H.

AUDIBLE ALERTS: The sensor pings any time you hit the center of a stud.
STUD DETECTION: Can locate the edges and center of wooden or metal studs up to 1 1/2 inches deep.
LIVE WIRE DETECTION: An alert pops up in the corner of the display whenever the system detects electrical currents up to 2 inches under the surface.
LCD DISPLAY indicates when you are nearing the edge and center of a stud. It also tells you when re-calibration is necessary.
SPOTLIGHT: Visual cues in the form of a glowing arrow aid you in finding the location of metal and wooden studs.

WireWarning Detection indicates the presence of live, unshielded electrical AC wiring while scanning in all scanning modes.
ACT (Auto Correcting Technology) automatically corrects common user errors, i.e. when scanning begins over a stud, as the Signal Strength Indicator help distinguish shallower targets from deeper ones.
Ergonomically designed grip allows a comfortable hold on the tool for any size hand, at any angle while the Patented SpotLite Pointing System clearly indicates the target location.
One fully charged 9V battery, not included, is required for the stud scanner to run at optimal performance to help you easily find studs and metal while avoiding electrical hazards.

Insulating cover satisfies ABYC/USCG insulation requirements.
Insulating cover breakouts allow wire access in three directions.
Insert molded studs ensure secure fuse mounting.
Stainless steel studs provide resistance to corrosion and high torque for excellent electrical contact.

Locates the edges and center of wood or metal studs up to 1 1/2-Inches (38 mm) deep.
Easy-to-read LCD display, audio tone, and the patented SpotLite Pointing System indicate stud center.
WireWarning detection indicates the presence of live, unshielded electrical wiring up to 2" deep.

150A Common BusBar with 10 screws and a cover (part number 2300).
Max voltage: 300V AC/ 48V DC, Continuous Rating: 130A AC/ 150A DC.
Terminal Screws: 10 x #8-32, Terminal Studs: 2 x 1/4"-20.
Reinforced polycarbonate base with tin plated pure electrical copper for maximum conductivity and corrision resistance.

600A PowerBar with four 3/8" terminal studs.
Reinforced polycarbonate base with tin plated pure electrical copper for maximum conductivity.

Two stud scan modes to find wood or metal studs or joists up to 1- 1/2-Inch (38 mm) deep.
Metal scan mode to locate metal pipes or rebar.
WireWarning detection indicates the presence of live, unshielded electrical wire up to 2-Inches (51 mm) deep.
ACT Auto Correcting Technology corrects common user errors automatically.

150A Common BusBar with 10 screws and a cover (part number 2300).
Max voltage: 300V AC/ 48V DC, Continuous Rating: 130A AC/ 150A DC.
Terminal Screws: 10 x #8-32, Terminal Studs: 2 x 1/4″-20.
Reinforced polycarbonate base with tin plated pure electrical copper for maximum conductivity and corrision resistance.