Top Electrode Graphite Mould

3 Pieces Heart Star Cross Graphite Casting Ingot Mold Metal Refining Scrap Melting Casting Mould for Smelting Gold Silver Metal Aluminum Copper Brass Zinc

  • Quality Graphite Material: made of quality graphite material, the ingot molds won't affect the metal purity during the metal refining process.
  • Fast cold and hot conditions, with good thermal stability, producing exquisite refining effect for you.
  • Detailed Size Information: the outside dimension of heart graphite casting mold is about 50 x 50 x 20 mm/ 1.97 x 1.97 x 0.79 inch, the inner is about 10 mm high.
  • The cross graphite casting mold is about 88 x 47 x 8 mm/ 3.45 x 1.85 x 0.31 inch, the inner is 63 x 38 x 4 mm/ 2.48 x 1.5 x 0.16 inch.
  • The star graphite casting mold is 50 mm/ 1.97 inches in length and width, 11.45 mm/ 0.45 inch on each side, proper in size for you to cast metal and make your own jewelry.
  • Good Performance: the graphite molds for casting metal has nice thermal stability, which can withstand 2000 degrees Celsius, shorten the melting time and save energy, has good impact resistance and corrosion resistance to acid and alkali, good in performance to ensure the reliability of product quality.
  • A Wide Range of Application: the casting ingot mold has a wide range of application, suitable for experiments and melting of non ferrous metals, such as gold and silver, brass, copper, aluminum, zinc and so on, they can also be applied for test analysi....
Check Stock

Graphite Ingot Mold Silver Ingot Mould Gold Casting Ingot Crucible Mold for Melting Casting Refining Gold Silver Metal Aluminum Copper Brass (40 x 40 x 45 mm, 1000 g Gold/ 500 g Silver)

  • Size information: the outside dimension is 50 x 50 x 50 mm and the inner is 40 x 40 x 45 mm, the capacity is about 1000 g gold or 500 g silver, general size can meet your most melting or casting needs for metals.
  • Durable material: the main material is graphite, hardly ash content ensures that the metal purity will not be affected during the metal refining process.
  • Fast cold and hot conditions, with good thermal stability, exquisite refining effect.
  • Nice performance: our casting ingot crucible mold has nice thermal conductivity, which can highly shorten the melting time and save energy, and withstand 2000 degrees Celsius, nice acid and alkali resistance, nice corrosion resistance, impact resistance, 89 MPA compression resistance, and 48.7 MPa flex resistance, nice impact resistance performance to ensure the reliability of product quality.
  • Wide uses: this ingot mould is suitable for experiments and melting of non-ferrous metals, such as gold, silver, brass, copper, aluminum zinc, lead and so on, also can be applied as graphite crucible melting into non-ferrous metals, test analysis, as the ingot mold and other purposes.
  • Taking the size of the product into account, small-capacity metal melting are more suitable.
  • Package contents: you will get 1 piece of gra....
Check Stock

Piscifun Viper X Spinning Reel - Ultralight 5.2 1 High Speed Spinning Fishing Reel 10+1BB Carbon Fiber 33 LB Max Drag,1000 Series

  • Lighter & Stronger - Based on high quality graphite material, new mould technology was applied for the Viper X fish reel on frame and rotor. This....
  • Multiple Retrieves - The Piscifun Viper X spinning reels features a lightning fast 6.2:1 gear ratio as well as a buttery smooth 5.2:1 in our 500,1000....
  • Smooth & Consistent - Double shielded 10+1 stainless steel bearings provide incredible smoothness for the Viper X fishing spinning reels. The....
  • Increased Waterproof - Innovative Waterproof Tech including the one way clutch bushing, one way clutch plate, stainless steel washer and shielded....
  • Unbeatable Affordable - Tiny details highlight premium quality. Such as the high density EVA knob, CNC machined braid ready spool and exquisite....
Check Stock

Weber 67532 Igniter Kit, Genesis II 330/335

  • Weber 67532 Igniter Kit for Genesis II 330 and 335 Grills Manufactured in 2019.
  • Includes: Ignition module, 6 terminal (1) Electrode, 36″, black (1) Electrode, 27″, yellow (1) Electrode, 46″, green (1) Electrode, 32″, red (1) Ground wire, 38″, blue (1) Sideburner wire, 38″, white (1) CLIP WIRE SADDLE SLF ADHSIVE NTRL GP 19 1 SWITCH MOMENTARY IGN CHROME/GRY GP 17 1 WIRE ASSY IGN LOW VOLTAGE C1 3B GP 17 1 SCREW 1/4-20 X .625 DP HH MAGNI 510 OUS 1 SCREW 6-32 X 1/4 PPH SS 1 ELECTRODE SUM S/B ’03 1 ELECTRODE CLIP SUM S/B ’03 1 INST IGN MDL/ELECTRODE OC GEN 19 ENG 1.
Check Stock

Champion Iridium 9407 Spark Plug (Carton of 1) - RER8ZWYCB4

  • Champion Iridium - Maximum Performance. Premium Spark Plug.
  • Iridium center electrode delivers maximum life.
  • Fine-wire center electrode and V-trimmed for greater ignitability.
  • V-trimmed ground electrode promotes sharper spark focus.
  • Maintains stable operating temperature under all engine loads.
  • Heat-Active alloy allows electrodes to reach optimal temperature quickly.
  • Champion iridium spark plugs feature a fine wire iridium center electrode that is laser-locked to the center electrode.
  • Every Champion iridium spark plug features a platinum ground electrode to ensure high performance and long life.
  • The fine-wire center electrode and platinum V-trimmed ground electrode produce the sharpest spark focus.
  • This provides the greatest engine performance regardless of the engine type or ignition system.
  • Exclusive heat-active alloy allows the electrodes to reach optimal temperature quickly and maintain stable operating temperature under all engine loads.
  • The Champion iridium spark plug fine-wire center and platinum ground electrode provides the sharpest spark focus for maximum plug performance.
Check Stock

LOVEINUSA Ice Cream Mold Set, Square Cakesicle Mold Small Popsicle Molds 50 Wooden Sticks for DIY Ice Cream Cake Mousse Dessert

  • PACKAGE INCLUDED - 1 x Square Chocolate-like Popsicle Mould, 1 x Classic Popsicle Mould, 50 x Wooden Stick, each mould has 4 cavities, suitable for both kids and adults..
  • SIZE - Chocolate-like Mould: 10.25 x 5.75inches, Classic Mould: 8.4 x 4.8inches, Popsicle Stick: 4.5inches (L), Cavity of Chocolate-like Mould: 1.9 x 3.1inches, Cavity of Classic Mould: 1.5 x 2.75inches.
  • PREMIUM QUALITY - Our Ice Pop Molds are all made of food-grade silicone, eco-friendly and BPA free, can stand with the temperature ranging from -40-230 degrees Celsius. Can be put in the fridge and oven. Washable and dishwasher safe..
  • PERFECT DESIGN - Our popsicle molds are compact and easy to store. Stackable in the fridge, room-saving and easy to clean up, labor-saving. Easy to pop the popsicle out when frozen. Lightweight and reusable, designed for long-term use..
  • VARIOUS APPLICATIONS - Our popsicle mould is not only perfect for all kinds of ice creams making but also for freezing fruit, cakesicle, mousse and other desserts making. Suitable for both refrigerator and oven..
Check Stock

Denso (4702) IK20TT Iridium TT Spark Plug, (Pack of 1)

  • Larger spark translates to more power and superior fuel economy.
  • 0.4 mm iridium center electrode, world’s smallest diameter that maximizes firing potential.
  • 0.7 mm needle tip ground electrode, promotes higher spark energy and less heat quenching.
  • DENSO patented 360 degree laser welding process, ensuring exceptional quality bond and structural strength with the iridium center electrode..
Check Stock

4 Pack Tray Silicone Molds

  • What you will receive: the package comes with 5 pieces of round coaster resin moulds, 5 pieces of square coaster resin moulds, 2 pieces of silicone coaster storage box mould in rectangle and round, sufficient quantities and proper combinations will satisfy your various DIY needs in daily life.
  • Quality material: these epoxy casting moulds are made of silicone material, they are lightweight, reliable and reusable, they can withstand temperature from minus 40 to 446 degrees Fahrenheit, you can use them for a long time, and they are non-toxic, safe and tasteless, easy to clean with warm soapy water.
  • Simple to use: our round and square resin moulds set has smooth interior, so they are easy to demould, you just need to put the required filler into the mould, wait a while until the resin is completely cured, and gently twist the mould to push it out without tearing easily, while maintaining the shape of the mould.
  • Size of products: the diameter of round craft resin coaster mould is approx. 9 cm/ 3.54 inches, the size of the square coaster silicone mould is approx. 9 x 9 cm/ 3.54 x 3.54 inches, the round coaster holder silicone mould measures about 4 x 10.5 cm/ 1.57 x 4.13 inches, and the size of rectangle coaster storage box silicone mould is approx. 4 x 7 x 1....
Check Stock

5 Pieces Maple Leaf Jewelry Resin Moulds Spice Silicone Mould and Lighter Protective Cover Epoxy Mould Set for DIY Crafts Resin Casting Candle Wax Soap Making Projects Supplies

  • What's included: the package contains 5 pieces resin casting moulds, including 1 piece maple leaf jewelry mould and 2 pieces (1 pair) spice grinder resin moulds and 2 pieces lighter protective cover resin moulds in two size, enough for you to apply and satisfy your various needs.
  • Nice material: these epoxy moulds are made of silicone, which are reliable and easy to release materials, and the mould is not easy to get deformed, washable, please pay attention to blending ratio when adjusting glue.
  • Dimension: the size of maple leaf jewelry mould is approx. 16 x 18 cm/ 6.3 x 7 inches, the diameter of spice grinder resin mould is approx. 6 cm/ 2.4 inches, the size of lighter protective cover resin mould is approx. 6.6 x 3.5 x 2.5 cm/ 2.6 x 1.4 x 0.98 inch and 5.2 x 3.5 x 2.5 cm/ 2 x 1.4 x 0.98 inch, proper sizes are simple for you to operate.
  • How to use: you just need to twist the silicone mould and release your items out of the mould after the resin is completely dry and solidified, no tearing while the mould maintains its shape, so convenient for your DIY crafts.
  • Design your styles: our epoxy casting moulds provide interesting DIY ways for you to make, you can add some dry flowers, sequins, powder or pigments of various colors into the resin mould, or add a ....
Check Stock

Whaline Christams Gingerbread House Baking Tray Silicone Molds for Desserts Chocolate Candy,Cookies 2 Pieces

  • PACKAGE INCLUDE - 2 pieces Christmas theme silicone molds, totally 16 mould pits. Enough quantity and patterns for festive use and daily use. Delicate....
  • 3D HOUSE DESIGN - 2 roof mould pieces and 4 wall mould pieces can used for house building and tree, gingerbread, bird animal mould can stand beside....
  • SAFE MATERIAL - Made of good-quality silicone, our molds are available in ovens, freezers, microwaves and dishwashers. Flexible, non-stick and easy....
  • SIZE - Silicone mould is measuring 28.3x 18.1 x 0.8cm .1inx 7.1in x 0.31in. Each mould pit is suitable for making a chocolate house. You can put the....
  • GREAT FESTIVE DECOR- Perfect for Christmas party, holiday family gathering and new year party. You make chocolate house decor for cake, bakery,....
Check Stock

3 Shapes Storage Box Resin Moulds with Lids Crown Resin Jar Mould Jewelry Jar Silicone Mould Jewelry Ring Box Epoxy Mould Storage Bottle Casting Moulds for DIY Container Soap Candle Trinket Making

  • Nice combination: the package comes with 3 shapes storage box resin moulds with lids, including 1 crown resin jar mould, 1 vintage stripe edge box resin mould, 1 mini jewelry box mould, different styles for you to choose, allow you have a interesting making time.
  • DIY as you want: you can DIY your own jar with different options like glitter powder, mica powder, liquid resin dye or dried flowers and so on, to make a nice home decor or a gift for your family and friend by your imagination.
  • Reliable quality: made of silicone material, smooth and washable, you can clean and store the jewelry jar silicone mould easily, saving you much time and energy.
  • Easy to release: our jewelry ring box epoxy mould is easy to operate, you just need to twist the mould and release your creation out of your mould after the resin is completely cured.
  • Your piece comes out easily, no sticking, no tearing while the mould maintains its shape.
  • Functional usages: ideal for making craft projects and jewellery DIY storage box, gift box, candy box, candlesticks, items containers, flower pot or other items, the finished crafts will also be beautiful decorations for your home, office, shop and other places.
Check Stock

4 Pieces Mushroom Shaped Silicone Mould Mushroom Cake Moulds Vegetable Fondant Candy Moulds for Chocolate Candy Ice Cube French Dessert Cake Decoration

  • Package includes: you will get 4 pieces funny shape silicone moulds in 3 different shapes.
  • The size of each mould is different, please refer to the picture for the specific size carefully before purchasing.
  • Reliable material: made of quality silicone material, these mushroom chocolate mould trays are durable, non-toxic, odorless, heat resistant and reusable, so you can rest assured to use them to make various kinds of food.
  • Mould trays are able to be applied in oven, microwave, dishwasher and fridge.
  • Smooth and non-stick: the surface of silicone mould is smooth, non-stick and flexible.
  • And the mushroom-shaped dessert will pop up by pressing the mould with your fingers, easy to demould and also convenient to clean with water.
  • Wide range of usages: these silicone moulds are suitable for baking mousse, cake, French dessert, chocolate, ice cube, candy, cheese cakes, fondant, chocolate, candy, cake decoration, soap, candle, wax and more.
  • Cute shape design: silicone chocolate mould is well designed as many mushroom shapes, cute and lifelike.
  • With this vivid 3D mould, your baking will be more fun and memorable, and desserts made with it will be loved by your friend and family.
Check Stock