Top Electrode Holder

ORRIL 300A American Style Welding Electrode Holder for ARC MMA Welder

  • 1.300Amps Welding Electrode Holder American Style.
  • 2.With 35-50 quick plug. Easy connected..
  • 4.Applicable to use with MMA ARC Welders 120 200 250 Amp, Suit for various kinds of Welding Rods etc..
  • 5. Pack of 1 PC 300A electrode holder with 35-50 quick plug 3M cable.
Check Stock

Electrode Holder 500 Amp Welding Electrode Holder Set, Heavy Duty Jaw Holding Plier Electrode Clamp for Arc MMA Welder,Black

  • 【High Quality Welding Electrode Holder】The upper and lower clamps of the electrode clamp are made of high copper alloy for maximum conductivity and strength. High quality electrode holder with 500A current capacity, comfortable insulated handle, convenient and easy to operate. Ideal for most arc, MMA, hand welding work.
  • 【Heat-resistant insulation for Safety】The handle is molded from a durable glass-filled nylon material for good heat and impact resistance. Glass-filled nylon handle and clamp insulated for maximum operator protection and safety.
  • 【Groove Jaw Design】The grooved jaw for firm grip of rods in 45°, 90°, 135°, 180° positions. Clamping Device holds the stick electrode tight so it will not slip while welding and transfers the welding current to the stick electrode.
  • 【Welding Chipping Hammer & Wire Scratch Brush】Welding chip hammer is made of high strength and toughness steel. Dual-headed design, one end is flat chisel, the other end is pointed chisel, convenient operation in narrow space.Coil spring handles reduce vibration and improve comfort. The wire brush is made of stainless steel bristles and with wooden handle, they are durable and have a strong cleaning ability..
  • 【Work Great】Which are easy to remove and clean corrosi....
Check Stock

300A 16㎡ Copper Clad Aluminum Cable Dinse 10-25 Connector Plug Welding Leads Assembly Set 9.8ft Welding Electrode Holder and 6.5ft Stick Plier Ground Clamp for ARC Stick MMA Mini Welding Rod Welder

  • ✨ This kind of Welding Electrode Holder is made of Copper Clad Aluminum clamp head and special insulation heat-resistant material. High temperature resistance, non-conductive, suitable for long-term use.
  • ✨ The Welding Ground Clamp is also suitable for stick,tig,mig or cut welding.Features wide grip jaws to ensure a firm connection.Grounds work can be welded to a good electrical ground earth.
  • ✨ 9.8ft long Welding Electrode Holder with cable and 6.5ft long Welding Ground Clamp with cable. 16㎡cable,Dinse 10-25 connector.*-*Please check connector size in the picture and compare with your welder´s Connector/Receptacle to make sure it fits*-*.
  • ✨ This Welding Leads Assembly Set has a strong current(300A).It is not easy to scald with copper forging.Also,the welding electrode rod in the Electrode Holder is not easy to fall off for the high strength Multi-angle occlusion.You will receive a ready to use fully assembled lead, no tools required.
  • ✨ This set of welding accessories have a common advantage: Copper guide, Copper Clad Aluminum wire, stable and durable, thick handle, high-quality upper and lower jaws, not easy to oxidize with heat, strong bite force.
Check Stock

SP Bel-Art Flexible Gooseneck Arm for F18317-1000 Electrode Holder (F18315-0000)

  • Molded of chemical and corrosion resistant acetal copolymer links with ball-and-socket joints.
  • Arm can hold and position a pH meter or similar tools.
  • One end is designed to accept the F18317-1000 Electrode Holder while the other has a 12.7mm (1/2") diameter stainless steel pin for attachment to a clamp or base.
  • Base and electrode holder sold separately.
Check Stock

Reboot Welding Electrode Holder Twist Type 400AMP Full Copper Heavy Duty Electrode Clamp Accessories for Welding Machine ARC MMA Welder

  • Electrode holder is made of High Quality Brass material with Insulated Handle..
  • Electrode thickness:1/16-5/32(1.6-4.0mm).
  • Electrodes burn within 1''from the head and can be bent to any angle and still be held securely.
Check Stock

Welding Electrode Holder 400AMP Screw Type Red Handle

  • GREAT FOR MOST Arc, MMA, Hand Stick welding jobs.
  • HIGH QUALITY:The electrode holder is with highly conductivity and improved cable connections.
Check Stock

WeldingCity 100-ft 2-AWG USA-made Heavy Duty Welding Cable Highly Flexible Durable EPDM Rubber Jacket 600V -50C-105C Black

  • ...istant to chemicals, oils, and acids and is also weather, ozone and sunlight resistant. Available welding cable sets: welding cable only.
  • cable set with terminal lugs and cable set with Dinse connectors..
  • Welding Cable Set With Terminal Lug includes: 2-AWG USA-made welding cable at selected length, one 300-amp stick electrode holder with accessory kit, one 300-amp ground clamp and three zinc-plated copper terminal lugs (1/2" stud hole)..
  • Welding Cable Set With Dinse Plug includes: 2-AWG USA-made welding cable at selected length, one 300-amp stick electrode holder with accessory kit, one 300-amp ground clamp, one zinc-plated copper terminal lug (1/2" stud hole) and two Dinse-type 35-50mm male connectors..
  • Heavy duty 300-amp stick electrode holder with strong jaw spring.
  • both upper and lower jaws made of copper (brass) with increased operator comfort. Zinc-plated steel 300-amp work clamp with strong spring, copper plated jaw, copper braid, copper plated hex screw for secured cable connection. Dinse-type twist-lock cable connector (male) with heat and oil resistant covers and accessories.
  • 1/2" (12.7mm) pin. Accepts cables AWG #2-1/0 (nominal cable area 35-50mm²)..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer ....
Check Stock

DOMAS 28 Pcs TENS Unit Replacement Pads Premium Reusable Electrode Pads（Snap On 3.5MM ,Self Adhesive Electro Therapy Patches for Electrical Stimulation,Non Irritating Stim Pads Design

  • [How to use]: TENS Unit Replacement Pads stay on and are easy to take off when you need to. These electrode pads are comfortable, flexible,and durable....
  • [Standard 3.5mm Snap Electrode Pad]: The DOMAS replacement snap electrode pads are compatible with all TENS/EMS devices on the market that uses the....
  • [FDA With Safety Certification]: When you use the pads, you get safe & fast pain relief, and are further protected by not having to ingest potentially....
  • [Quality packaging]:28 PCS(14 pair)+1 PCS Pad Holder.It has 4 PCS small ellipse(1.2''×1.6''),16 PCS medium palm-shaped(1.6''×2.8''),8 PCS large....
  • [Good Service]: Replacement Pads stay on and are easy to take off when you need to. These electrode pads are comfortable, flexible,and durable for....
Check Stock

Brilnurse 4 Outputs TENS Unit Muscle Stimulator Machine for Pain Relief Therapy, Rechargeable Electric Pulse Massager with 16 Electrode Pads 24 Modes 20 Level Intensity

  • 4 CHANNEL - Compared to dual channel TENS unit, you can apply up to 8 electrode pads simultaneously for better pain relief. eg. You can select PALM mode intensity 5 for your shoulders in channel A1 and A2, and select TAPPING mode intensity 7 for your legs in channel B1 and B2. A1 and A2 (B1 and B2) can only be set with the same mode and intensity.
  • 24 MODES & 20 INTENSITY - With 24 modes and 20 intensity, this TENS machine is efficient for kinds of body pain relief and muscle spasms, such as: arthritis, cervical spondylosis, sports injuries and muscle spasms. You can choose the appropriate mode and intensity for different body parts. It is a welcomed gift for many elders.
  • 16 HIGH QUALITY ELECTRODE PADS - These 16 upgraded industrial grade electrode pads are with better self-stick performance and longer lifespan. They are easy to clean an reusable. Just paste the pads on the included pads holder after use for easier storage.
  • 20 HRS USE TIME & Large LCD - A built-in powerful rechargeable lithium battery provides up to 20 hours of continuous use(It is advised to be used no longer than 15 minutes everyday for sensitive skin). Time set range from 10-60 minutes. With memory mode, every time you can start with the mode you chose last time. We include an....
Check Stock

Goplus 250 AMP MMA Welder ARC Welding Machine 110V/ 220V Soldering Accessories Tools

  • 【Profession Grade ARC Stick Electrode Welder】Detailed treatment makes this welding machine highly efficient and practical. Stick electrode welding machine for MMA welding in alternating current (AC). Perfect welding performance, ideal for welding mild steel and stainless steel..
  • 【2 levels transformer】2 levels of transformer, 110V and 220V. Fit both home and professional use..
  • 【Stable and Durable】Compact construction and exquisite MMA ARC welding machine, made of heavy duty stainless steel body, painted with durable yellow paints, ensure its long-last serving life-span..
  • 【Portable Design】Features 2 easy carrying handle handles and 2 Wheels for easy access and movement during your maintenance tasks, adds extra maneuverability. Can be used anywhere u need..
  • 【Safe with A Lot of Complimentary Necessities】Build-in fan on the machine to help heat dissipation. Features with thermal overload protection to ensure safety. It also comes with a copper electrode holder, a ground clamp, a protection mask and a brush/chipping hammer..
Check Stock

Thermo Scientific Orion Star A211 Benchtop pH/ISE/mV/Temperature Meter

  • Thermo Scientific Orion Star A211 pH Benchtop meter with pH range: -2.00 to 20.00.
  • Large, backlit graphic LCD display shows pH/mV/RmV and temperature along with electrode status, time, date, sample ID, user ID and calibration points.
  • AUTO-READ locks in the stable reading on your screen, ready indicator alerts when readings are stable, and timed reading gathers data in specific time intervals.
  • Included electrode arm and newly-designed probe holder make it easier to maintain and place probes into samples.
  • Works with almost every AC power source with the included universal power adapter, or use four AA batteries (sold separately) to run the meter on DC power.
Check Stock

HITBOX TIG Welder 110V 220V 200A 2T 4T TIG Stick MMA IGBT Inverter High Frequency Dual Volatge Welding Machine (Model: TIG200A)

  • Ship from the United States. Dual Volt 200 amp IGBT Tig Stick Welder with tig torch, earth clamp, electrode holder and gas tube..
  • Adopt newly IGBT inverter technology, Compared to MOS Technology, greatly reduce breakdown.
  • Inverter frequency up to 100KHZ, the technology is mature, stable performance.
  • TIG Welding thickness 0.5-6mm, and application of electrode diameter (MM): 2--3.2mm.
  • Easy arc ignition, litter spattering, stable current and good shaping.
Check Stock