Top Elegoo Mars

Sovol 3D 2 Pack Stick On Gasket for 5.5' & 6.1' 3D Resin Printers, Universal Protection from Resin Spill, Fits for Mars Series ANYCUBIC Photon QIDI Tech 5.5s - Resin Resistant

  • ...he FEP film from creating suction and pulling on the LCD, which can dislodge it while attempting to remove the vat. *THIS LISTING IS FOR THE GASKETS ONLY. IT IS NOT A SCREEN PROTECTOR..
  • [Suitable for both 5.5" & 6" resin printer] – Works on multiple 5.5 inch or 6.1 inch LCD resin printers. Compatible with EPAX X1, Elegoo Mars/Mars Pro/Mars C/Mars 2/Mars 2 pro, Anycubic Photon/Photon-S, Prusa LD-002R, QIDI Tech Shadow 5.5 (NOT 6.0) & Longer Orange 30 UV Resin Printers. Please note: You must re-level your build plate per the instructions included after installation..
  • [Extra durable] - Made of high-quality polypropylene, our gasket is built to last. It is resin-proof and safe from tears and abrasion, while remaining very flexible..
  • [Save your prep time] - Two-piece backing ensures easy installation. Now you're no longer forced to tidy up your printer right after a print. With our stick on gasket, you will have peace-of-mind knowing that your printer internals and LCD are protected from resin leaks..
  • [High light transmittance] - It would not affect the performance of LCD screen. Any questions or issues about sovol products please feel free to contact us..
Check Stock

ELEGOO Mars 4 DLP 3D Printer and ELEGOO Standard Resin Grey 1000g

  • LEGOO Mars 4 DLP 3D Printer, Desktop Resin 3D Printer with Ultra-Quiet Printing, 20000+ Hours Service Life, and Ultra-Low Operating Power, Printing Size of 132.8x74.7x150mm³/5.22x2.94x5.9in³.
  • ELEGOO 3D Printer Resin LCD UV-Curing Resin 405nm Standard Photopolymer Resin for LCD 3D Printing Grey 1000g.
Check Stock

ELEGOO 6.08 Inches Monochrome 2K LCD Compatible with ELEGOO Mars 2 and ELEGOO Mars 2 Pro Resin 3D Printers with 1620x2560 Resolution Active Area 3.25 x 5.14 inches

  • Original Monochrome 2K LCD screen used on ELEGOO Mars 2 and Mars 2 Pro resin 3D printer.
  • 6 inches LCD with 1620x2560 high resolution ensures your printing with high precision.
  • Four times longer in lifespan and two times faster in printing speed than the regular RGB LCD 3D printers, which means higher printing efficiency,....
  • Assembly of the 2K LCD screen is straightforward and easy. (See tutorial video links in the description below).
  • The 2K LCD screen kit is well-protected with anti-static PE foam package in the box.
Check Stock

ELEGOO Build Plate for Mars 3 Pro LCD 3D Printer, Replacement Build Platform with Anti-Slip Hexagon Socket Screws and Sandblasted Surface, Compatible with Mars 3 and Mars 3 Pro

  • Compatible with ELEGOO Mars 3 and Mars 3 Pro LCD 3D printer. Size: 150*95.6*10mm..
  • Upgrade large Allen socket screw for a more stable and durable leveling performance..
  • Sandblasted surface with stronger adhesion is not easy to fall off during printing for a better printing result..
  • Made of high quality aluminum alloy, it is non-deformation with good flatness, easy to install and clean, and durable for long-term use..
  • It comes with an Allen key to replace or fasten the screws on the build plate..
Check Stock

ELEGOO Mercury Plus 2 in 1 3D Printing Washing and Curing Machine V2 for Mars Photon S Photon Mono LCD SLA DLP 3D Printer Models

  • ...ate with models on it and wash them together, which can avoid direct contact with the uncured resin. The height of the platform bracket can be adjusted to fit the liquid level in the bucket..
  • 【Ideal Compatibility】Compatible with most of the LCD/DLP/SLA 3D printers like ELEGOO Mars, Mars Pro, Mars C, Photon, Photon s etc, which provides you an ideal support for washing and curing your 3D resin prints..
  • 【Special Notes】The washing function is not quite suitable for 3D models printed with water washable resin, which is better to be washed with running water..
Check Stock

ELEGOO 5PCs FEP Release Film Mars LCD 3D Printer 140x200 MM 0.15mm Thickness

  • Compatible with ELEGOO MARS LCD 3D printer.
  • 200*140 MM and with the thickness of 0.15 mm.
  • 95% light transmittance which ensures high stability of UV lightning.
  • Heat resistant and durable quality for long term usage.
  • Comes with an easy-to-follow tutorial on the package guiding you to replace the FEP film. Please remove the double-sided protective film before use..
Check Stock

6PCS FEP Film 200x140x0.15mm for ELEGOO Mars 2 Pro, Mars 3, Mars 3 Pro, ANYCUBIC Photon, Photon S, Photon Mono 4K, Phrozen Sonic Mini 4K, Creality Halot-one, LD-002H LCD Resin Printer Fep Replacement

  • Wide Application: Suitable for all desktop LCD 3D Printer that prints size no more than 200x140mm(L*W), such as ELEGOO Mars 2 Pro, Mars 3, Mars 3 Pro, ANYCUBIC Photon, Photon Mono SE, Photon S, Phrozen Sonic Mini 4K, Voxelab Proxima 6.0, Creality Halot one, Halot one Plus, Halot one Pro, LD-002R, LD-002H etc. Please note that this release film does not have a frame, so it is not suitable for the models that need to replace with the release film with a sealed frame..
  • High Purity FEP: Special FEP release film for 3D printing, using ultra-high purity FEP. Made of hot melt extruded cast film and has excellent non-stick, high-temperature resistance, electrical insulation, mechanical properties, wear resistance, and other characteristics. Size: 200x140mm.
  • High-Temperature Resistance: Long-term working temperature 205 ℃, melting point 260 ℃. Perfectly smooth, scratch free, perfectly cut, and shipped in thoughtful protective packaging..
  • High Transmittance: With over 95% light transmittance, this ultra-transparent film ensures the high stability of UV lightning..
Check Stock

KOYOFEI 3PCS Mono LCD Screen Tempered Glass Protective Film for 6.08‘’ Resin 3D Printer High Light Transmittance Protective Film for Elegoo Mars 2/Mars 2 Pro/Photon Mono 133x85.5x0.33mm

  • The light transmittance of the tempered film is 95%, which will not affect the light of the monochromatic screen to cure the resin in the resin tank....
  • With good protection, the tempered film can not only protect the monochrome screen from being scratched by sharp objects in daily use, but also....
  • Size: 133x85.5x0.33mm, perfect for 6.08-inch monochrome screens, compatible with ELEGOO Mars 2 , Mars 2 Pro, Photon Mono, Photon Mono SE and other....
  • Easy to use, the back of the tempered film is covered with a protective film. Please keep the screen clean before use, then remove the back protective....
  • Small Tips:The tempered film has a thickness of 0.33mm. In order to avoid printing problems, it is recommended to level the 3D printer again after....
Check Stock

6PCS Creality FEP Film Release Films 200 x 140 x 0.15mm for ELEGOO Mars/Mars 2 Pro/Mars 3/ANYCUBIC Photon/Photon Mono 4K/Phrozen Sonic Mini 4K/Creality Halot-one/LD-002R/LD-002H LCD SLA DLP 3D Printer

  • HIGH TRANSMITTANCE - The 3D release film, with high transmittance of over 95%, makes more perfect printing. Thickness: 0.15mm. Size information: 200 x 140mm. Package: 6 PCS Film..
  • WIDE COMPATIBILITY - Fit for ELEGOO Mars/Mars 2 Pro/Mars 3/ANYCUBIC Photon/Photon Mono 4K/Phrozen Sonic Mini/Phrozen Sonic Mini 4K/Halot-one/LD-002R/LD-002H/CL-60/Wanhao UV/MonopriceMini Deluxe/Nova3D/EPAX X1. Note: Not Fit for Halot one plus/Photon Mono S 3D Printer. Please confirm whether this FEP Film is compatible with your 3D Printer Before buying..
  • HIGH PURITY FEP - Special FEP release film, using ultra-high purity FEP resin. It is made from hot melt extruded cast film. It has excellent non-stick, high-temperature resistance, insulation, wear resistance, and other characteristics..
  • HIGH-TEMPERATURE RESISTANCE - Long-term working temperature 205 ℃, melting point 260 ℃. Perfectly smooth, scratch free, perfectly cut, and shipped in thoughtful protective packaging..
  • STABLE RELEASE FORCE - FEP melts at high temperature, passes through the extrusion equipment, and is poured into a similar plane to form with uniform thickness. Long-lasting durability, and stable release force. Strong ductility, excellent ductility, ductility up to 300%..
Check Stock

FULAMENT Fula-Flex Resin Sheet for 3D Printing - 150mm x 95mm - Flexible Stainless Steel Printer Build Plate

  • [ EASY TO INSTALL ] - Fulament’s resin build plate is very easy to install and use! Simply align the magnetic sticker, remove the paper backing from....
  • [ EASY TO REMOVE PRINTS ] - Keeping our customers’ needs in mind, we built a 3D printer build plate that increases printing success. Our 3D printing....
  • [ WHY FULAMENT ] - Unlike other resin flex plates who use spring steel, we use a spring tempered magnetic grade of Stainless Steel. Ensuring that the....
  • [ COMPATIBILITY ] - This 150mm x 95mm resin plate fits Elegoo Mars 3.
  • [ FULAMENT'S PROMISE ] - Fulament is a USA-based company. Our products are made by enthusiasts for enthusiasts. We know you'll love our 3D printer bed....
Check Stock

3D Printer Castable Resin Jewelry Liquid Casting/Wax Resin for LCD 3D Printer 1000 ml Casting Resin for All Different LCD 3D Printer

  • ✅ Jewelry Sample Observation: Ultra precision & high-strength ensure models' detail clearly display, delicate and perfect. It suitable for....
  • ✅ Lowest Shrinkage: Lower shrinkage and great stability significantly reduce printing time with its excellent fluidity, work excellent, which makes....
  • ✅ Practical Material: Jewelry model printed by NOVA3D Wax Resin can directly act as pressure rubber model, thus you can get empty jewelry shape by....
  • ✅ Better Adaptability: NOVA3D 405nm wax resin adapt to most LCD, DLP 3D printers, such as NOVA3D Elfin, Bene4, GEM, Anycubic photon, Elegoo Mars and....
  • ✅ Quality Guarantee: We pride ourselves on providing caring service, both before and aftersales. Our support will respond to all inquires within 24....
Check Stock

ELEGOO Mini Purifier with Activated Carbon Filter and Universal Adaptor for LCD,DLP,MSLA Resin 3D Printer（Pack of 2)

  • Odor Control: Activated carbon can absorb and filter the irritant resin odor before they are ventilated throughout the cooling fan at a super adsorption rate, which gives you fresh and safe user experience..
  • Replaceable Carbon Filter: It comes with one activated carbon block which can be used for 3 to 6 months. The carbon can be replaced and need to be purchased separately..
  • Long Endurance：With the 2000mAh battery, it can work continuously for at least 24H once fully charged via the power adapter included..
  • Wide application：Not only for ELEGOO Mars Printer, it also can be used for LCD, DLP, MSLA Resin 3D Printer.
  • Well-Protected Package: Well-designed and sturdy box stuffed with all the parts, keeping it from damage during transportation..
Check Stock