Top Enclosure Ground Wire Clamp

Forney Easy Weld 261, 140 FC-i Welder, 120V, Green

  • ...ows you to weld mild steel up to 1/4 in plate.
  • PORTABLE WELDER- Lightweight 19 lbs. easily carried to any Do-It-Yourself, Maintenance, Repair, Metal Fabrication and Hobbyist project.
  • RUGGED- All metal case, Built to take the day to day. Big enough to handle 2 and 10 pound rolls of wire.
  • WELDER INCLUDES- 8' MIG gun, 8' ground clamp, Integrated handle with torch wrap and a 20A-15A adapter. Backed by a 12-month warranty.
  • PRODUCT SPECIFICATIONS- Dimensions: 16.75" (425.45 millimeters) x 8.125" (206.38 millimeters) x 12" (304.8 millimeters), Weight: 19 lbs. (8.62 kilograms), Gasless/flux-core welding only, Portable, Torch wrap, Infinite voltage and wire feed speed control, 120-volt input, 140 AMP output, Welds up to 1/4 in. (6.35 millimeters), Handles .030 in. or 0.35 in. wire, Includes: 8' MIG gun, 8' ground clamp and 20A - 15A adapter, Duty Cycle 30% @ 90A.
  • RECOMMENDED ACCESSORIES- Contact Tips (60170, 60171 and 60172),Welding Nozzles: (85336 and 85337), Diffuser: (85339), Flux Core MIG Wire: (42300 and 42301), Anti-Spatter Spray: (37030), Nozzle Gel: (37031).
  • Click on the (BY FORNEY) name above in blue under the title to view our full catalog of Welders, Abrasives, Chain/Wire Rope, Tools and more!.
Check Stock

200A Magnetic Welding Ground Clamp, 200A On/off Adjustable Magnetic Welding Ground Clamp Rare Earth Switchable Magnet Welding Holder,Grounding Magnet Connector

  • Magnetic Welding Ground Clamp: Made of high quality iron, durable in use. High strength and hardness. Fast set up and grounds instantly. Applicable to clamp both flat and round workpieces..
  • 200A Magnetic Ground Clamp: Magnet Strength Pull Force 30 kg, Simple to connect, ground wire of welding machine. Simply place on clean surface and turn on then start welding. Stays clean because magnetic field turns completely off..
  • Easy to Use: Strong grip on flat or round iron surfaces. The on/off control makes the metal dust fall off without cleaning, which is convenient and simple to use..
  • Package Included:1 x Welding Ground Clamp.
  • Warm Tips: Make sure that the grounding device is in the off state when it is not in contactwith the ferromagnetic material. It can be freely controlled to open and close. When the ferromagnetic material is opened and connected, it will produce sudden and powerful suction. Do not use welding grounding to lift or transport materials..
Check Stock

Rockville RV12.2B 1200W Dual 12 Car Subwoofer Enclosure+Mono Amplifier+Amp Kit

  • Rockville RV12.2B 1200W dual 12" Car Subwoofer Enclosure amplifier+amp kit.
  • Rockville RV12.2B Dual 12” bass enclosure system with matching mono block amplifier. 1200 watts peak power/ 400 watts RMS cea-2031 rating. Dual 12” bass enclosure system with matching mono block amplifier. Quasi transmission Line cabinet design..
  • Angled at 15% for near perfect in vehicle bass alignment. Exterior: high quality aviation grade tweed Carpet. Oversize Rockville Shield embroidery. Mono, Gold-plated push style, speaker terminal. Dual, high-power, high-efficiency 12" Subwoofers..
  • 1200 watts peak power. Power output: 200 watts RMS cea-2006 power @ 4-Ohm and 97DBA (Reference: 1Watt into 4 ohms). Frequency Response: 15Hz - 20Khz (-3Db). RMS power: 400 watts @ 2 ohms. 4 ohm mono-block class A/B..
  • 17" High grade twisted pair 100% Copper RCA cables. 17' 8 gauge translucent Blue Super flex Power cable. 3' 8 gauge clear super flex ground wire. 17' 18 gauge Blue remote cable. 17' 16 gauge speaker wire. Gold Plated anl heat resistant fuse holder.
Check Stock

BAYTORY Upgrade Magnetic Welding Support Ground Clamp Tools, Welding Magnet Head Strong Magnetism Large Suction, Copper Tail Welding Accessories Stability Clamps

  • Check out this handy Fix-tite Magnetic Welding Ground Clamp. A device that speeds up grounding chores for welders..
  • NO-HASSLE SAFETY SETUP - You no longer have to waste your time finding, placing or removing a ground point for a welding job. This device serves as the ground point, which you can take with you anywhere. Simply tack this onto a convenient spot, hook up your safety wire and you're ready to weld..
  • STRONG MAGNETIC GRIP - This magnetic clamp attaches easily to any smooth metal surface, flat or curved. It holds on tightly, without budging easily. Now that you've got this, you won't have to take minutes searching for a good ground or attaching grounding tabs..
  • OFFERS CONVENIENCE - Sometimes you're faced with a welding job that has limited options for ground points. You don't want to have to damage a car's paint job simply to affix a safety line. This magnetic clamp is handy to have in such situations. You can stick in on a car body and not have to damage the paint. The clamp can also be attached to metal poles, struts, railings or the welding table..
  • Material: Copper / insulation board. Durable and solid.With copper tail with good welding stability..
Check Stock

VOLT Solid Brass 12V LED Landscape Lighting Kit (6 Spotlights, 4 Path Lights) with Transformer

  • ...der the shade to increase ground illumination. Complies with International Dark-Sky Association standards..
  • 150-WATT SLIM LINE LOW VOLTAGE TRANSFORMER – Slimmer, lighter and easy to install compared to traditional transformers. Clamp-type wire connectors allow for fast and secure connections with a stainless-steel enclosure and a lockable hinged lid. Designed specifically for LEDs, and features a toroidal core for more reliable, efficient, cooler and quieter operation than EI laminated types. Mechanical timer included..
Check Stock

MTX TNP212D2 12\ 1200 Watt 4 Ohm Dual Loaded Car Audio Subwoofer Package with Sub Enclosure, Planet 1500W Monoblock A/B Amplifier & 8 Gauge Wiring Kit

  • COMPLETE SOUND PACKAGE: Upgrade your cars sound system with this complete package that includes MTX 12 inch dual loaded car subwoofer, a sub enclosure, Planet Audio monoblock amplifier and a complete 8 gauge amp installation wiring kit.
  • CAR SUBWOOFER: The MTX Terminator series subwoofer system includes 2 subs, sub enclosure and a car amp.
  • Boasts 1200 watts max power and 400 watts RMS.
  • Features rubber surround, polypropylene cone and a 2-inch aluminum single 4 ohms voice coil.
  • SUBWOOFER BOX ENCLOSURE: This MTX enclosure features solid MDF construction and thick black carpet.
  • Dimensions (H x W x D1 x D2): 14 x 29.69 x 13.5 x 11.13 inches.
  • CAR AMPLIFIER: Planet Audio Amplifier delivers 700 watts RMS x 1 @ 4 Ohm, 1100 watts RMS x 1 @ 2 Ohm, 2500 watts RMS x 1 @ 2 Ohm max power, 1500 watt max power.
  • Switchable input sensitivity: 100mV 2V or 2V 8V.
  • Dimensions (H x W x L): 2.19 x 10 x 10 inches.
  • INSTALLATION WIRING KIT: 20-foot 8 gauge red power cable.
  • 20-foot high performance RCA interconnect.
Check Stock

Memphis Audio MJME8S1 8' MOJO Car Subwoofer+Ported Sub Enclosure+Mono Amp+Wires

  • Package Includes: (1) Memphis Audio MJME8S1 8″ MOJO Car Subwoofer In Ported Sub Enclosure Box MJM822, (1) RockvilIe RXD-M3 4000 Watt/2000w RMS Mono Class D 1 Ohm Amplifier Car Stereo Amp, (1) RockvilIe RWK41 4 Gauge Complete Car Amp Wiring Installation Wire Kit with RCA’s.
  • Features of MJME8S1: Piano black gloss finished front panel, Carpet wrapped enclosure, 4-layer wound copper voice coil, Fiberglass reinforced subwoofer cone, Stitched foam surround, Heat dissipating aluminum heat sink, DVVC Direct Vent Voice Coil Cooling, Ported Enclosure. Specifications of MJME8S1: Single 8″ 900w RMS/1800w PEAK @ 1Ω loaded enclosure, Width 20.7″, Height 12.7″, Top 13.7″, Bottom 16.2″.
  • Features of RXD-M3: RockvilIe RXD-M3 4000 Watt/2000w RMS Mono Class D 1 Ohm Car Stereo Amplifier With Optical Coupler Technology, CEA Compliant Power Ratings (Rated at less than 1 % distortion) (Use these CEA ratings when matching and comparing with other CEA compliant brands such as Kicker, Rockford Fosgate, etc), 1 Ohm: 1000 Watts x 1 Channel .
  • RMS Power Ratings: (Use these RMS ratings when comparing with great brands such as Hifonics, Earthquake, Soundstream, etc), 1 Ohm: 2000 Wat....
Check Stock

Jacazooy Welding Electrode Holder 4.9ft Stick Copper Plier Ground Clamp MMA Mini Welding Rod Copper Clamp Tool Accessories With Cable

  • ✔️The goods are mixed in black and white and shipped randomly. Please don’t take the order if you mindThe Welding Electrode Holder is made of all copper clamp head and special insulation heat-resistant material. High temperature resistance, non-conductive, suitable for long-term use..
  • ✔️The Welding Ground Clamp is suitable for a welding arc.Features wide grip jaws to ensure a firm connection.Grounds work to be welded to a good electrical ground earth..
  • ✔️ This welding accessories is made of copper clamp head, strong current.It is not easy to scald with pure copper forging.Also,the welding electrode rod in the Electrode Holder is not easy to fall off for the high strength Multi-angle occlusion..
  • ✔️The welding accessories have a common advantage: Copper guide, pure copper wire, stable and durable, thick handle, high-quality upper and lower jaws, not easy to oxidize with heat, strong bite force..
  • ✔️ The Welding Electrode Holder with cable is 6.5ft long and the Welding Ground Clamp with cable is 4.9ft long. Please allow the manual measurement data to deviate slightly. (0.1-0.2ft error).
Check Stock

Triplett AC Line Splitter and GFCI Outlet/Receptacle Tester with 5 Visual Indicators (ET200)

  • Check Outlet Wiring, Measure Voltage, And Use Your Clamp Meter To Measure Current Up To 15A Without Breaking The Circuit.
  • Use A Clamp Meter (Sold Separately) Around The 1X Position For A Direct Current Reading.
  • Use The 10X Position To Display Low Current Readings Multiplied By 10.
  • Cetlus Listed - Test Gfci Receptacles For Proper Operation.
  • Detect Faulty Wiring In 3-Wire Receptacles.
  • Lights Display 5 Wiring Faults: Open Ground, Open Neutral, Hot/Ground Reverse, Open Hot, Hot/Neutral Reverse.
Check Stock

Astro Pneumatic 7760 Cordless Circuit Tester

  • Does not require ground cable or clamp, user’s own body/hand as ground.
  • User must be holding tester as well as contacting a ground with bare hands.
  • Safe on ECM’s, transducers and airbags.
  • V-Tip for safe and centered wire piercing.
Check Stock

VOLT 300W LED Low Voltage Transformer (12V/15V)

  • ...mers, which may not be compatible with LED circuits, suffer from extensive voltage loss, and are subject to overheating and premature failure..
  • LIFETIME WARRANTY – With an industry-leading warranty, this Slim Line Transformer is designed for a lifetime of worry-free use - we guarantee it. The core, stainless steel enclosure and all electrical components are backed by our lifetime warranty..
Check Stock

PRORECK PR-122M Complete 1500W Dual 12

  • Package Includes: (1) PRORECK PR-1500.1M 1500W Amplifier, (1) dual 12" Car Subwoofer, (1) Complete Amp Installation Wire Kit..
  • PRORECK PR-1500.1M Dual 12 Car Subwoofer enclosure system with matching mono block amplifier. 1500 watts peak power/ 400 watts RMS. The surface is high quality aviation grade tweed carpet and has embroidery. The angle is 15%, close to the perfect vehicle bass alignment. Frequency Response: 15Hz - 20kHz. Power Output: 200 Watts RMS Mono-block at 4 Ohms and 1% THD+N. 4-Ohm Mono-Block Class A/B. Dynamic Power: 400 Watts @ 2 Ohms..
  • This system includes a top-level Enclosure with more powerful and rich bass. It also includes a mono block bass amplifier. This mono amplifier is built just for loud bass.It feature high power 1.5" aluminum 4-layer voice coils with bumped and vented magnet motor structures among other features. It has efficient bass response with deep and clean sound..
  • Amplifier with full range RCA output, RCA line input, high level input, bass EQ, dashboard remote, etc, meet all your needs.And amplifier contains mute circuit, bass optimization circuit, protection circuit, thermal protection, speaker short circuit protection, input overload protection and DC offset protection,make users have a better experience. Rich wire....
Check Stock