Top End Bits Bulldozers

SpeTool Carbide Chamfer End Mill V Groove Router Bit 60 Degree, 4 Flutes 1/4 inch Shank for CNC Carving and Chamfering

  • Chamfer End Mill With 60 Degree, 1/4" Shank Diameter, 2" Overall Length..
  • The Router Bits Are Super for Carving V Groove, CNC Lettering And Signs, And Chamfering End..
  • 4 Flutes Designed Chamfer Bits to make Cutting More Efficiently And Clean Surface..
  • Solid Carbide Material With Tiain Coated, Applicable for Hard wood, Plywood, Soft wood, OAK, MDF And Metals Under HRC 55..
  • V Groove Router Bits Can Be Used in CNC, X carve, 3D carving, Router Hand And Table Mount, And Most Brand Handheld Routers with 1/4 Inch Collets..
Check Stock

Toystate Road Rippers CAT Mini Machine Free Construction Playtime Kit (12 Pack: 4 x Dump Trucks, Wheel Loaders, Excavator, 2 x Bulldozer, 1

  • DUMP TRUCKS: 4 dump trucks are included, each with two axles and fully functioning dumping trays.
  • BULLDOZERS: 2 bulldozers are included, with simulated treads and liftable demolition arm.
  • WHEEL LOADERS: 2 free wheeling loaders have lifting arms, so you can carry sand and drop it into the dump truck.
  • EXCAVATORS: 2 excavators with double jointed digging arms are included. The body also swivels on top of its two axles for realism.
  • BACKHOES: 2 Backhoes with a rear digging arm and front scooper, both functionable.
Check Stock

AUTOTOOLHOME 1/8\ 3/16\ 1/4\ 5/16\ 3/8\ 1/2\ high Speed Steel HSS 4 Flute Straight End Mill Cutter 5/32\ 1/16\ Set of 8

  • Cutting Diameter : 1/8" 3/16" 1/4" 5/16" 3/8" 1/2" 5/32" 1/16".
  • Suit for: Hardness of metal for above 30 degrees,with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
  • End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
  • The bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
Check Stock

Yakamoz 10-Pack 1/8" Shank Upcut Spiral Router Bits 3-Flute 7/8" Cutting Length CNC Router Flat End Mill Bits for MDF Acrylic Wood PVC 7/8" Cutting Length

  • Type: Spiral (Upcut), Cutting Type: 3 Flutes with Flat End, Shank: 1/8" (3.175mm), Cutting Diameter: 1/8" (3.175mm), Cutting Length: 7/8" (22mm), Overall Length: 1-33/64" (38.5mm).
  • Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut groove and slots, mortises, cycles and dados with clean edge and bottom, better than straight bits..
  • The unique flute design makes cutting process easier and faster, smooth cutting without 2nd polishing process..
  • Great for carving, cutting, engraving, milling in materials like density board, plastic, PCB, PVC, PP, MDF, nylon, resin, plywood, hardwood etc..
  • Built with tungsten steel, the CNC router mill has the superiority of high hardness, high-temperature resistance, and wear resistance..
Check Stock

Capri Tools 6 mm M6 Stubby XZN Triple Square Bit Socket, 1/4-Inch Drive (CP30353)

  • These XZN triple square bits are a must have for working with BMW, Mercedes, VW, Audi, Porsche and most other European vehicles.
  • Stubby bits, up to 20% shorter than standard length bits, are perfect for tight spots.
  • Premium S2 steel forged bits are exceptionally strong and durable. These S2 steel bits withstand high torque and do not twist, protecting both the bit and the fastener. Premium Chrome Vanadium steel sockets plated with our SmartKrome protective plating are durable and corrosion resistant.
  • Our proprietary advanced heat treatment process further enhanced the S2 and Chrome Vanadium steel alloy to achieve the optimal balance of strength and performance. All bits have chamfered end to ensure a smooth fit onto fasteners.
  • 1/4 in. Drive M6 (6 mm) stubby XZN triple square bit.
Check Stock

End Mill Bits, HSS CNC End Mill Cutter for Wood, Aluminum, Steel, Titanium, Straight 4 Flute Mill Bit Set of 6（3mm,4mm,6mm,8mm,10mm,12mm）

  • 1.Four flutes produce a better finish than fewer flutes..
  • 3.One Set of end mill bits Including: 6 Different kinds of Size end mills to meet your need, 3mm, 4mm,6mm, 8mm,10mm,12mm.
  • 4.Hardness of metal for above HRC 45 degrees,with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
  • 5.End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
Check Stock

Capri Tools 14 mm MT14 Stubby XZN Triple Square Bit Socket, 1/2-Inch Drive (CP30358)

  • These XZN triple square bits are a must have for working with BMW, Mercedes, VW, Audi, Porsche and most other European vehicles.
  • Stubby bits, up to 20% shorter than standard length bits, are perfect for tight spots.
  • Premium S2 steel forged bits are exceptionally strong and durable. These S2 steel bits withstand high torque and do not twist, protecting both the bit and the fastener. Premium Chrome Vanadium steel sockets plated with our SmartKrome protective plating are durable and corrosion resistant.
  • Our proprietary advanced heat treatment process further enhanced the S2 and Chrome Vanadium steel alloy to achieve the optimal balance of strength and performance. All bits have chamfered end to ensure a smooth fit onto fasteners.
  • 1/2 in. Drive M14 (14 mm) stubby XZN triple square bit.
Check Stock

EANOSIC Spiral Router Bits Up Down Compression Bit 1/2 inch Cutting Diameter with Nano Blue Coated 1/2 inch Shank Solid Carbide CNC End Mill for Wood Carving Engraver Milling Cutters Extra Long 4”

  • UP & DOWN cut spiral router bit with 1/2 inch shank and 1/2 inch cutting diameter, 1-1/2 inch cutting length, 4 inch for total length.
  • SOLID CARBIDE AND NANO BLUE COATED: The up and down cut spiral router bit is made of solid carbide. And Nano Blue Coating with high hardness and heat....
  • Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut and downcut groove and slots, mortises, cycles....
  • The CNC End Mill Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp. And also for....
  • The compression router bit suit for CNC router and any plunge routers with 1/2" collet..
Check Stock

4Pcs Tapered Ball Nose End Mill 0.25MM-1MM with 0.5MM Tip Diameter CNC Router Bits Set 2D 3D Woodworking Tool 2 Flute CNC Router Bits

  • 【High Quality】The end mills are made of ultra-fine tungsten carbide steel alloy, its nano black coating/titanium coating with high hardness and heat resistance..
  • 【End Mill Bits Set】4Pc【End Mill Set】4Pcs ball nose bit 2-flute, Nano black coat and titanium coat CNC router bits, will satisfying your different needs.s ball nose bit 2-flute, Nano black coat and titanium coat CNC router bits, will satisfying your different needs..
  • 【Parameter】Ball raidus 0.25mm, 0.5mm, 0.75mm, 0.1mm, flute length:15MM, overall length 1.5 inch, single side angle 5.12°..
  • 【Wide Compatibility】Widely used in various materials including plastics, aluminum, circuit board, wood, as well as other precision parts processing,they are compatible with most desktop CNC machines..
  • 【Wide Application】PCB, SMT, CNC, Mold, plastic fiber, carbon fiber, hard wood, printed circuit board, aluminum and other precision parts processing..
Check Stock

General Tools 90 Pin Vise, Double End

  • IDEAL FOR: Securely holding small stock, taps, drills, reamers, scribers, wire, files and other tools...
  • RECLAIM TIME: Help to reclaim precious time that is normally spent switching between tool attachments or searching for drill bits in a crowded toolbox..
  • REVERSIBLE COLLET: Each end of this Pin Vise features a reversible collet for holding your favorite drill bits, taps and reamers..
  • LIKE HAVINg TWO TOOLS: Now you can drill a small hole with one end of the tool, then flip to the other end for quick deburring or reaming..
  • HOLLOW INTERIOR: The tool features a knurled body for a comfortable grip and a hollow interior for use with long wire or rods..
  • GENERAL TOOLS: We're a recognized leader in designing and developing specialized precision tools dedicated to delivering exceptional customer service. We encourage artisans and DIYers to work smarter, measure better, and repair more productively..
Check Stock

Construction Birthday Banner Dump Truck Party Decorations Pre-Assembled Builder Bulldozer Excavator Tank Truck Garland Supplies

  • Happy birthday letter banner with trucks on each end. No DIY Required. All items are assembled and ready to hang..
  • The construction birthday banner is a great addition to decorate your child's birthday party. Also dump trucks, bulldozers, Excavator, Tank Truck, Orange Road Cones, and Safety hat are included as pictured..
  • This is a fun Birthday Banner perfect for little boys or girls. Suitable for all occasions: Birthday Parties, Showers, Thanksgiving, Christmas, Festivals, Family Reunions, Catering, Indoor or Outdoor Events..
  • Use it to decorate a wall, a backdrop, Mantel, Overhangs, Doorway, Archway, Branches in Trees, Veranda, or your sweets table..etc. The possibilities are endless..
  • Please feel free to contact us, if there is any problem with our product. We are more than happy to assist you to solve it..
Check Stock

OREI eARC 4K 60Hz Audio Extractor Converter 18G HDMI 2.0 ARC Support - HDCP 2.2 - Dolby Digital/DTS Passthrough CEC, HDR, Dolby Vision HDR10 Support (HDA-927)

  • Cutting Diameter : 1/8" 3/16" 1/4" 5/16" 3/8" 1/2" 5/32" 1/16".
  • Suit for: Hardness of metal for above 30 degrees,with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
  • End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
  • The bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
Check Stock