Top End Fitting Insulator

Oatey 43551 Replacement Ring, for Use with 4 in Closet Flanges, 3-Inch or 4-Inch, Brass

  • 3 countersunk holes and 3 closet bolt slots for secure attachment to the floor.
  • 3-Inch Spigot Closet Flange fits inside the hub end of 3-Inch Schedule 40 DWV fitting.
  • 4-Inch Spigot Closet Flange fits inside the hub end of 4-Inch Schedule 40 DWV fitting.
  • Solvent weld into fitting-short throat length is perfect for use in tight spaces and where the fitting is close to the sub-floor.
  • Four mounting slots for proper fit and alignment of closet bolts to the toilet.
Check Stock

Power Steering Hose Kit for 1982-88 T-Bird Steering Rack to GM Pump

  • Adapts an aftermarket 1982-1988 T-Bird/Cougar type rack to a GM Type 1 Saginaw pump.
  • Pressure line has a 5/8"-18 male inverted flare fitting at the pump end.
  • Adapter for the GM pump, to allow it to work with both metric O-ring and standard inverted flare style threads on the power steering pump fitting..
  • Features a -6AN to an 9/16"-18 O-ring fitting on the rack end.
Check Stock

iMopo 70 Pack Drip Irrigation Universal 1/4 Barbed End Plug Fittings Barbed Connectors for Drip or Sprinkler System

  • 【Great Value】：Comes with 70 pieces barbed end plug fittings in total,enough to meet your daily use..
  • 【DURABLE MATERIAL】：Made of high-impact,UV-resistant and chemical-resistant materials,durable and reliable to assure a long life using time..
  • 【BARBED DESIGN】：Barbed end plug fittings tight fits universal 1/4" drip tubing,barbed design ensures the tubing will not slip and leak..
  • 【EASY TO INSTALL】:Barbed end plug fitting is easy to be installed without glue, tools, or clamps.Push the tubing firmly over the end plug fitting.Warm tips:Put the tubing end into 75°~85° hot water 10 seconds before pushing them..
  • 【FOR WIDE APPLICATIONS】:Barbed end plug fittings are Great for use with raised garden beds,lawn,greenhouse gardening and agricultural watering applications..
Check Stock

OKBA RV Vent Covers for Roof 14'x 22'x2.75', RV Skylight Cover for RV Trailer Camper/RV Shower Skylights,RV Vent Insulator with Reflective Surface

  • The rv skylight cover with 2.75" thick insulating foam and with double layer reflective surface which can reflect harmful UV-RAYS. Latest upgrade design rv vent insulator is both a cold insulator and heat insulator..
  • Fits for 22" x 14 x 2.75" RVs/Campers/Trailers shower skylights/vents,make sure the RV/camper skylight is vertical and depth is greater than 2.75" without obstructions..
  • The rv vent cover for roof will be completely return to its original shape until in 24-48 hours after you open vacuum sealed packaging,let the unfold rv vent insulation pillow lay flat..
  • The rv vent insulator with a removable case has a zipper,easy to remove if rv vent cover needs to wash. Easy to install, just get in vent and pull insulator cover out in one minute..
  • RV window insulation covering size:14x 22x2.75",package with 8pcs sewn velcro make RV sky light covers more fixed. If you have any question pls kindly let us know,we will provide 100% satisfactory service and Amazon local fastest shipping..
Check Stock

Camco RV Vent Insulator and Skylight Cover with Reflective Surface, Fits Standard 14 x 14 Inch RV Vents (45192)

  • Durable RV Skylight Insulator: Blocks and protects against the sun's damaging rays.
  • the vent insulator keeps your RV cool in the summer and warm in the winter.
  • 3-Layer Protection: The RV roof vent insulator features a reflective layer, a foam insulating layer, and a synthetic fleece layer that provides UV protection.
  • Saves Energy: The RV vent insulator and skylight cover has a full 2.75-inch foam coating that blocks heat transfer and increases AC efficiency.
  • Compatibility: The RV skylight cover fits standard 14-inch RV vents and is machine washable.
  • Quality Products: Camco makes quality products for RVing, boating, camping, towing, tailgating, and grilling that help take your passion for the outdoors to the next level.
Check Stock

DC Defy Mens Jacket Twill Sz L

  • Color-block styling and retro outdoor-inspired details combine with the warmth of 100G of insulation for timeless good looks and cold weather comfort..
  • Profill Insulation - Our Go-to insulator because it provides not just loft and heat-trapping warmth but also because it allows for moisture-transport away from your body when things heat up..
  • Weather Defense - performance-driven outerwear for handling in the heaviest winter conditions..
  • StormDivision - Designed to deliver the best in all-condition breathability and weather resistance..
  • Commitment to Sustainability - 100% recycled packaging and hang tags, and the end result is our most eco-friendly product line to date..
Check Stock

M MINGLE Pressure Washer Adapter, Metric M22 15mm Female Thread to M22 14mm Male Fitting, 4500 PSI

  • ATTENTION: CONVERT METRIC M22 15MM FEMALE TO M22 14MM MALE. M22 14mm fitting is compatible with Generac, Simpson, Briggs Stratton, craftsman, karcher, Ryobi pressure washer. M22 15mm fitting is compatible with Sun Joe, Campbell, MI-T-M, AR Blue, Stanley, Cleanforce, Simoniz, Excell power washer..
  • If not sure which fitting on the pressure washer accessory, please measure the outsize diameter of inside plug at the female end or measure the inside diameter of male end. If 14mm, it is M22 14mm fitting. If 15mm, it is M22 15mm fitting. Pressure washer coupler connects power washer gun to hose, hose to pump..
  • If leakage, please put teflon tape on the male threads of your wand or other products..
  • Made of high quality brass, resistance to corrosion. Working pressure is up to 4500 PSI.
  • M MINGLE is professional on Pressure Washer Accessory and always stand behind our products, please free to contact us if any questions..
Check Stock

Attwood 93806MUSD7 Mercury Fuel Line Kit, 6 Feet Long, 3/8-Inch Diameter, Multi-Layer Low-Permeation Primer Bulb

  • Reliably delivers fuel to your Mercury engine.
  • Includes 6-foot-long, 3/8-inch diameter low-permeation fuel line.
  • Line is designed to prevent kinking and hardening, and is rated up to 100 degrees C.
  • Comes with tank fitting 8838TM6, tank end hose fitting 8838HF6, and engine end hose fitting 8896LP6.
  • Multi-layer, low-permeation primer bulb with connections engineered for strength, durability, and leak resistance.
  • Kit is compatible with Ethanol blended fuels.
  • For use with Mercury brand engines and tanks.
  • Male Universal Sprayless Connector (USC) tank fitting included.
Check Stock

SUSPA C16-04270 Gas Spring (set of 2)

  • Package Content: 5Pcs x Gas Spring End Fitting.
  • Gas Spring Strut Joint connector End Fitting..
  • It is a good replacement of gas springs Ball Strut, and the gas springs are motion control devices for lifting, holding, counterbalancing, and providing support for applications such as horizontally hinged doors, lids, hoods and canopies..
Check Stock

Polaris Ranger Fuel Line Assembly, Genuine OEM Part 2521226, Qty 1

  • Durable, flexible, long lasting fuel line.
  • Gray color helps reduce potential for vapor lock on warm days and exposure to sunlight..
  • Includes quick disconnect fitting at engine end and 1/4" NPT threaded fitting at the fuel tank end..
Check Stock

Flexzilla Polyurethane Recoil Hose 1/4 in x 15 ft ZillaGreen - LP1415AFZ

  • EXTREMELY FLEXIBLE - All weather flexibility (-40° to 165°F) resists kinks and coils easily.
  • EXTREMELY DURABLE - The polyurethane construction of the recoil hose will not brittle over time Polyurethane is more flexible than nylon, and has....
  • TANGLE-FREE RECOIL - Polyurethane has better recoil memory than nylon, and will not tangle when done with use. Polyurethane is also more flexible than....
  • 120 POUNDS PER SQUARE INCH - Maximum working pressure at 70 degrees F. Product Dimensions - 180 x 0.25 inches.
  • REUSABLE END FITTINGS - 1/4 in. MNPT reusable ends. Tool End: 16 in. tail with swivel fitting. Compressor End: 8 in. tail with rigid fitting.
Check Stock

2PCS Car Exhaust Rubber Muffler Hanger, 2 Holes 11mm (0.43inch), Universal Muffler Bracket Mount, Exhaust High Density Rubber Insulator Muffler Hanger (Black)

  • Universal Accessory: This rubber exhaust hanger fits most cars that use an easily replaceable hanger system and consists of two holes and a rubber lined insulator bracket. Please be sure to check the size and distance of the hooks before use to ensure the product is suitable for use..
  • High quality rubber: The exhaust pipe insulator hanger is made of high quality, high density rubber. It is heat resistant and durable for long term use. This is a standard automotive part used to replace exhaust systems..
  • Depth: 20mm (0.8") Hole diameter. 11mm (0.43"). It is a universal vehicle tool for exhaust systems of cars, trucks, Jeeps and SUVs. Please make sure to measure the size before purchase to avoid improper use..
  • Installation: First use the exhaust hanger removal tool to remove the muffler hanger from the exhaust system. Then hang the new exhaust hanger on the mounting pegs attached to the chassis. Finally, hang the other end of the exhaust hanger on the exhaust pipe mounting pegs..
  • What you will get: 2 x rubber exhaust hanger, this rubber exhaust hanger is essential to effectively reduce the sound generated by rocking and hitting the car body, reduce the height and contact surface of the exhaust pipe with th....
Check Stock