Top End milling Machine

BEAMNOVA 2200W Wet Grinder Grain Mill Molino de Maiz Electric Food Grinder for Corn Flour Rice Nut, Green Industrial Commercial Machine

  • ...s: Supporting power: 2200W. Rated voltage: 110V. Rated speed: 1400r / min. Drill diameter: 150mm. Direction of rotation: counterclockwise. Milling: Corn 60kg / h. Rice 75kg / h. Wheat 75kg / h. Paddy rice 50kg / h. Refining: Soybeans 50kg / h. Rice 50kg / h..
  • UPGRADED VERSION - BEAMNOVA 2200W Electric Food Mill Machine features a capacitor shell made of galvanized iron material, which will not be crushed during the transport and puts an end to rust..
  • WIDELY APPLICABLE - BEAMNOVA Electric Food Grinder Machine is suitable for wet & dry grinding of bean, rice, corn, wheat, rice, corn, sorghum, herb, soybeans, coffee and other crops into dry powder or wet slurry for corn flour, gluten free flour, rice flour, sorghum flour, tofu, soymilk, coffee powder or other food material or feed..
  • POWERFUL FOOD GRINDING MACHINE - BEAMNOVA Electric Corn Mill Grinder has higher performance than traditional mill. The innovative steel milling technology with finest grinding diameter of 80 mesh opens the door to healthy life..
  • Note: 1. The powder or slurry milled from this machine is human edible. 2. The rust in the grinding disc is normal and does not affect the milled items. 3. Please open the cover after grinding for air dry to avoid rust. 4. Before using the device, p....
Check Stock

ABORON Corn Grinder Electric Grain Mill Machine, Molino De Maiz Electrico, 3000W Dry Machine Cereals Coffee Wheat Miller, Commercial Home (wet&dry grinder)

  • ⏩【Machine Specification】 Grain mill grinding Machine, 2800r / min Rated speed, 3000W Supporting power, 110V Rated voltage, 150mm Drill diameter, counterclockwise rotation.
  • ⏩【Work Capacity】 Milling: (Corn ≤ 133lbs / h, Rice ≤ 166lbs / h, Wheat ≤166lbs / h, Paddy rice ≤ 110lbs / h).
  • Refining: (Soybeans ≤ 110lbs / h, Rice ≤ 110lbs / h).
  • can grind wheat, rice, corn, soybeans, spice, pepper, flower and other crops into powder.
  • ⏩【Quality Material】 The grinder capacitor shell is made of iron galvanized material, the transport process will not be crushed. Copper coil brings more power and a safer motor. Whole antirust painting, putting an end to rust.
  • Heritage of traditional mill, innovative steel mill technology.
  • ⏩【Package included】 1* Grinder machine, 2pcs metal + 2pcs sand grinding discs, 1* funnel, 1* Operation manual, please read the manual carefully before turning on the machine.
  • ⏩【Before using, the user should read】.
Check Stock

Micro 100 SFPM-050-10 Square End Mill - Upcut, 5 mm Cutter Dia, 16 mm LOC, 1 Fl, 5 mm Shank Dia, 50 mm OAL, Uncoated

  • END MILL CUTTER: Mill Cutter, usually used to be assembled on milling machine. Suitable for CNC data processing center, carved, high-speed machines..
  • WIDELY USE: Can milling of copper, aluminum, tool steel, cast iron, etc..
  • HIGH TOUGHNESS: High toughness, abrasion resistance, high-speed cutting for the high hardness..
  • EASY TO USE: Can processing directly or fine processing to the heat treatment mold..
  • SAVING TIME: Reducing the number of tool changes, improve machine actuator movement rhythm, save mold making time..
Check Stock

OSCARBIDE Carbide Inserts APKT1604 TiAlN Coated Indexable Milling Inserts APKT Style,10 Piece/Box

  • APKT 1604 carbide turning inserts,85 degrees parallelogram,Relief Angle 11 degrees,nose radius 1/32"..
  • Made of Tungsten Carbide,TiAlN Coated ,the cutting speed are 4-7 time faster than generic steel,and Sharpened on a diamond wheel to make it longer tool life, providing you a better experience and durable use and Better cut.
  • Designed for cast iron and non-ferrous materials,good for both finishing and roughing.
  • Used for indexable face mill and end mill,Performing square milling and side milling,ramping milling, helical milling, slotting milling, plunging milling..
  • These Insert fit for our Carbide Indexable End Mills and other same size indexable end mills, please search B07SG8JKDS or B099WPXW29 to buy this indexable end mills.
Check Stock

BONYTOOL Dovetail Milling Cutter HRC55 Coated Tungsten Steel Carbide Slotting End Mills 75° 60° 45° Chamfering CNC 4 mm -60°

  • Material: Tungsten steel, high hardness and good toughness.
  • Rugged construction, durable with long service life.
  • Milling cutter end mills machining hardness: HRC up to 55 degree.
  • Applicable machine tools: CNC machining center, CNC machine tool, engraving machine, fine engraving machine, high speed machine, etc.
  • Applicable materials: stainless steel, die steel, ductile cast iron alloy steel, mixing steel, titanium alloy, etc..
Check Stock

SpeTool 4 Flutes Ball Nose End Mill Solid Carbide CNC Router Bits 1/4 Inch Shank with 3 Inch Long Spiral Milling Tool

  • Solid Carbide Ball Nose CNC Bit with 1/4inch Shank and 1/4inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length.
  • Round Top with 4-Flute, Material: Solid Carbide with TiAlN Coated.
  • For CNC, Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc.
  • The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

AUTOTOOLHOME 1/4 inch HSS 4 Flutes End Mills Milling Cutter End Drill Bit Straight Shank Pack of 2

  • HIGH PROCESSING EFFICIENCY: the edge of end mill bits is HARD and SHARP with TIAIN coating, process the heat treatment materials under 32°with high speed, reduce changing times and improve the production efficiency..
  • APPLICATION: end mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
  • CUTTING EDGE DESIGN: the bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
  • STRONG and DURABLE:The end mill bits are made from Ultra-fine tungsten steel bar, with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
Check Stock

Niagara Cutter - SPB540-0.500-D2-B.3-Z4 17012957 Cobalt Steel Ball Nose End Mill, Weldon Shank, TiCN Finish, Roughing and Finishing Cutting, 30-Degree, 4-Flute, 3' OAL, 0.500' Cut Diameter, 0.500' Shank Diameter

  • 4 Flute design for creating finer finishes and creating a higher metal removal rate.
  • General purpose end mill for working on all types of materials and high temperature alloys.
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
  • Titanium Carbonitride(TiCN) allows for optimal end mill and machine tool performance with it's ability to increase material removal rates 3 to 5 times that of uncoated tools.
  • Center Cutting End Mills are designed with "End Teeth" making these ideal for applications such as profiling, contour and slotting.
Check Stock

SpeTool 14411 Ball Nose Carbide End Mill CNC Cutter Router Bits Double Flutes Spiral Milling Tool 1/4 inch Shank with 3 inch Over Length

  • Solid Carbide Ball Nose Router Bit with 1/4inch Shank and 1/4inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length.
  • Round Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated.
  • For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc.
  • The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

Precision Twist 4ASM High Speed Steel Short Length Drill Bit, Black Oxide Finish, Round Shank, Spiral Flute, 135 Degree Point Angle, 11.00mm (Pack of 6)

  • HIGH PROCESSING EFFICIENCY: the edge of end mill bits is HARD and SHARP, process the heat treatment materials under 32°with high speed, reduce changing times and improve the production efficiency..
  • CUTTING EDGE DESIGN: the bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
  • APPLICATION: end mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
  • One Set of metric end mill bits Including: 8 Different kinds of Size end mills to meet your need, 2mm=1/16.
Check Stock

HHIP 3900-1005 5-Piece R8 End Mill Holder Set, 3/16-3/4'

  • 5 PC SET 3/16, 3/8, 1/2, 5/8, 3/4" DRAWBAR END THREAD: 7/16" -20.
  • Hardened and ground For Bridgeport type milling machines.
  • Hardened and ground. For double and single end mills (single end mils only for sizes over 5/8").
  • 5 PC SET For Bridgeport type milling machines. DRAWBAR END THREAD: 7/16" -20.
  • For double and single end mills (single end mils only for sizes over 5/8").
Check Stock

SpeTool 5Pcs 2-Flute Square Nose Carbide End Mill 1/8 Inch Router Bit with 1/8 inch Shank CNC Machine Tools, TiAlN Coated

  • ENDMILL SIZE. 1/8" shank, 1/8" cutting diameter, 1/2" cutting length, 1-1/2" over all length.
  • SPECIFICATION. Flat top, 2-flute, HRC55 with tialn coated, use 1/8" collet.
  • PREMIUM QUALITY. Made of high quality tungsten carbide, precision edge-grinding technology.
  • excellent cutting results and enhanced productivity.
  • WIDE APPLICATION. For cnc, engraving machine, carbon steel, mould steel, inconel, stainless steel, titanium alloy etc.
  • suitable for side milling, end milling, finish machining, etc..
  • PACKAGE INCLUDE. 5 pieces high quality end mill pack in a individual plastic box.
Check Stock