Top End of life Firmware

POLAR H10 Heart Rate Monitor, Bluetooth HRM Chest Strap - iPhone & Android Compatible, Black

  • BUILT-IN MEMORY: Heart rate monitor stores 1 heart rate training session. Perfect for sports and activities where a wrist unit would be difficult to use..
  • GoPro COMPATIBLE: Pair your H10 Polar heart rate sensor directly to the GoPro Hero 5 compatibility camera and overlay your heart rate data onto the recorded video..
  • UPDATEABLE FIRMWARE: Heart rate monitor contains firmware updates that enhance the functionality..
  • ENHANCED BATTERY LIFE: 400 hours of operation time on a user replaceable battery. Operating temperature - 10 °C to +50 °C / 14 °F to 122 °F.
  • COMFORTABLE FIT: Revised heart rate chest strap design provides the comfort and security needed when exercising..
  • Compatible with iOS mobile devices iPhone 4s and later and android mobile devices with Bluetooth 4.0 capability and android 4.4 or later.Battery type:CR 2025.
  • Building upon the legacy of Polar heart rate technology, the H10 is set to be the standard upon which consistent, accurate heart rate recording is based..
Check Stock

SAMSUNG 870 QVO SATA III 2.5\ SSD 2TB (MZ-77Q2T0)

  • GO BIG, DO MORE: The 870 QVO is Samsung’s latest 2nd generation QLC SSD with up to 8TB of storage capacity. Compatible with SATA 3 Gbps & 1.5 Gbps interfaces.
  • ENHANCED IN EVERY WAY: With an expanded SATA interface limit of 560/530 MB/s sequential speeds, the 870 QVO improves random access speed and sustained performance.
  • BOOST CAPACITY: The 870 QVO is available in 1, 2, 4 and 8TB.
  • RELIABLE AND SUSTAINABLE: The capacity of the 8TB 870 QVO increases reliability up to 2,880 TBW using a refined ECC algorithm for stable performance.
  • UPGRADE WITH EASE: Upgrading to 870 QVO is now easier than ever for anyone with a desktop PC or laptop that supports a standard 2.5 inch SATA form factor.
  • SAMSUNG MAGICIAN SOFTWARE: Manage your drive and enhance its performance with tools that keep up with the latest updates and monitor the drive's health and status.
  • FLASH MEMORY BRAND: All firmware and components, including Samsung's world renowned DRAM and NAND, are produced in house, allowing end to end integration for quality you can trust.
Check Stock

Samsung 870 EVO 500GB SATA 2.5" Internal Solid State Drive (SSD) (MZ-77E500)

  • GO BIG, DO MORE: The 870 QVO is Samsung's latest 2nd generation QLC SSD with up to 8TB of storage capacity.
  • ENHANCED IN EVERY WAY: With an expanded, SATA interface limit of 560/530 MB/s sequential speeds, the 870 QVO improves random access speed and sustained performance.
  • BOOST CAPACITY: The 870 QVO is available in 1, 2, 4 and 8TB.
  • RELIABLE AND SUSTAINABLE: The capacity of the 8TB 870 QVO increases reliability up to 2,880 TBW using a refined ECC algorithm for stable performance.
  • UPGRADE WITH EASE: Upgrading to 870 QVO is now easier than ever for anyone with a desktop PC or laptop that supports a standard 2.5 inch SATA form factor.SAMSUNG MAGICIAN SOFTWARE: Manage your drive and enhance its performance with tools that keep up with the latest updates and monitor the drive's health and status.FLASH MEMORY BRAND: All firmware and components, including Samsung's world renowned DRAM and NAND, are produced in house, allowing end to end integration for quality you can trust.
Check Stock

ORTUR Laser Master 2 Pro S2-lu2-2, 24V Laser Engraver, Laser Engraving Cutting Machine, DIY Laser Marking for Metal, Compresed Spot CNC, 32-bit Motherboard LaserGRBL,Engraving Area 400×400mm

  • ... system update] 1. Because it is equipped with the latest OLM-PRO-V10 motherboard, the engraving is smoother and more delicate, the engraving accuracy is higher, and the speed is faster. 2. The circuit system with 24V voltage is upgraded, the current is lower, and the system is safer. 3. Update Ortur Laser 1.8 firmware, which is the most advanced laser engraving machine firmware at present, with more powerful functions. 4. Support Ortur offline control screen..
  • ✅[Product advantage] Ortur Laser 1.8 firmware is based on OLF1.4 firmware upgrade, optimizes the motion algorithm, and increases the maximum motion speed from 4000mm/min to 10000mm/mm. The focus of the LU2-2 laser module is smaller because of it. It is the second-generation FAC laser module, the focal point is only 0.07*0.06mm, and the focal area is about a quarter of the first-generation 0.23*0.23mm. So he can cut through 3mm plywood and 6mm pine board at a time..
  • ✅[Safety protection]1. When the engraving machine is displaced or tilted, it will automatically stop the laser to prevent damage to the target from the laser.
  • 2. When the engraving machine or computer crashes, the laser will stop working immediately to prevent continuous fire. 3. The engraving machine is turned on, but there ....
Check Stock

Sniper Elite III - PlayStation 3 Standard Edition

  • Fast, accurate and stable. Designed by pro FPS gamers.
  • Exquisite UI design. Super easy to use. Online storage..
  • No original controller need for revification.Please check the compatibility of the product at the brook official web site before you place the order because NOT all the brand or models of the controllers / wheel / Joystick are compatible with the brook adapter..
  • Hot swapping. Firmware upgradable. NOTE: The latest PS4 firmware update disables the Brook Super Converter after 8 minutes. Brook has developed a firmware update to address this. Please make certain to update your device firmware before using. With Gam3Gear Keychain..
  • BrookSniper App: available in App Store/Google Play. Exquisite UI design. Super easy to use. Real-time applying with blue-tooth devices. Optimized config for popular games. Online storage..
Check Stock

ORTUR 24V Laser Engraver 2 Pro-S2-SF, Laser Cutter 5.5W Output Power Laser Machine Eye Protection, Laser Master with 400x400mm, 10000mm/min Laser Engraving Machine for Metal and Wood

  • ... system update] 1. Because it is equipped with the latest OLM-PRO-V10 motherboard, the engraving is smoother and more delicate, the engraving accuracy is higher, and the speed is faster. 2. The circuit system with 24V voltage is upgraded, the current is lower, and the system is safer. 3. Update Ortur Laser 1.8 firmware, which is the most advanced laser engraving machine firmware at present, with more powerful functions. 4. Support Ortur offline control screen..
  • ✅[Product advantage] Ortur Laser 1.8 firmware is based on OLF1.5 firmware upgrade, optimizes the motion algorithm, and increases the maximum motion speed from 4000mm/min to 10000mm/mm. The focus of the LU2-4 laser module is smaller because of it. It is the second-generation FAC laser module, the focal point is only 0.12*0.15mm, and the focal area is about a quarter of the first-generation 0.23*0.23mm. So he can cut through 4mm plywood and 8mm pine board at a time..
  • ✅[Safety protection]1. When the engraving machine is displaced or tilted, it will automatically stop the laser to prevent damage to the target from the laser.
  • 2. When the engraving machine or computer crashes, the laser will stop working immediately to prevent continuous fire. 3. The engraving machine is turned on, but there ....
Check Stock

Polar H10 Heart Rate Monitor, Bluetooth HRM Chest Strap - iPhone & Android Compatible, Black, Size XS - S

  • BUILT-IN MEMORY: Heart rate monitor stores 1 heart rate training session. Perfect for sports and activities where a wrist unit would be difficult to use..
  • GoPro COMPATIBLE: Pair your H10 heart rate sensor directly to the GoPro Hero 5 compatibility camera and overlay your heart rate data onto the recorded video..
  • UPDATEABLE FIRMWARE: Heart rate monitor contains firmware updates that enhance the functionality..
  • ENHANCED BATTERY LIFE: Polar watch stores 400 hours of operation time on a user replaceable.
  • COMFORTABLE FIT: Revised heart rate chest strap design provides the comfort and security needed when exercising..
  • Compatibility : iOS mobile devices: iPhone 5 and later, with iOS 11 or later.
  • Android mobile devices with Bluetooth 4.0 capability and Android 5.0 or later.
  • Building upon the legacy of Polar heart rate technology, the H10 is set to be the standard upon which consistent, accurate heart rate recording is based. Utilizing advanced materials and optimized construction, the H10 combines the latest in Bluetooth sma.
Check Stock

PDP Victrix Pro BFG Wireless Controller for PS5

  • ... offset sticks. Fans of fighting games can swap in the Fight Pad module, to replace the Right Stick with six microswitch buttons..
  • App Update Coming Soon - The Pro BFG is fully customizable and mappable out-of-the-box, please reference the Product Guide below for more information on button mapping and configuration..
  • Firmware Update - A new firmware update is available for your Pro BFG Controller and Dongle to extend battery life to 20 hours of play and improve wireless stability. Download the Victrix Control Hub.
  • Four Mappable Back Buttons & Multi-Position Clutch Triggers - Map the back buttons on the fly with the LED Profile Button, then save and store up to 3 unique profiles on the controller. The patented clutch triggers have 5 different stopping points, allowing players to tune them to their specific liking..
Check Stock

Official Creality New Upgrade Motherboard Silent Mainboard V4.2.7 for Ender 3 Customized and Non-Standard Matching,Ender 3 Silent Mother Board

  • Creality new release silent motherboard V4.2.7 ，32bit, compatible with Ender 3..
  • Super quiet by TMC2225 drivers , Bootloader installed,copy the firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the power cord. Insert the SD card & power cord, and turn on the printer. Wait 10s to complete the firmware updating process., easier to flash the firmware..
  • Thermal runaway protection is enabled. The Board is Optimized by Circuit, effectively solve Heating Problem..
  • Firmware comes pre-installed, pre-configured for the Ender 3, makes it totally plug & play..
  • This silent mainboard preinstalls the Ender-3 firmware. If you want to install it in your Ender 3 Pro/Ender3 v2/ Ender-5, need to flash the Ender 3 Pro/Ender 3 v2/Ender5 firmware..
Check Stock

Sonicon Wireless PS4 Elite Controller w/ 4 Remappable Back Paddles Customized Modded PlayStation 4 DualShock Joystick Gamepad Gaming Controller for PS4 PC Switch Raspberry Pi Retropie Emulators

  • Remappable Paddles - Work Out of The Box, Easily Remappable & Removable Back Paddles.
  • Re-designed Ergonomics - Improved, Enlarged Grip and Non-slip Texture Provides Precise and Secure Handling, Outperforms the Stock PS4 Controllers..
  • Long Battery-life - Built-in 1000 mAh Rechargeable Battery, Type-C Fast Charging Port, Up to 8 Hrs Gaming Time..
  • Firmware Upgradeable - Your Gaming Needs Are Changing, So We Improve Our Product Continuously. Firmware Can Be Upgraded via the USB C Port..
  • Customize-able - The Shell & Back Paddles Support Customization, We Have Tons of Options for You. Please Contact Custom Service for More Details..
Check Stock

Monoprice Mini Delta v2 3D Printer 110 x 120mm Heated Build Plate PoloPrint Pro Wi-Fi Auto Resume Advanced Gcode Auto Leveling Open Source Works with PLA & ABS

  • Touchscreen Control, Updated Firmware and UI: You spoke and we listened. Larger icons, clear and concise instructions, and overall quality of life....
  • Fully assembled: the mp mini delta 3D printer comes fully assembled, ready to print out of the box.
  • PoloPrint Pro Wi-Fi Connection: Connect to the printer over Wi Fi using the updated PoloPrint Pro app for iOS or Android..
  • Open Source Friendly Cura Compatibility: The industry standard firmware is great for people who want to tinker. The printer is compatible with Cura....
  • Quiet Driver Motors: Thanks to quieter driver motors, the Mini Delta V2 operates at a whisper quiet 30dBA, which is considerably quieter than the....
Check Stock

Sonicon Wireless PS4 Elite Controller w/ 4 Remappable Back Paddles Customized Modded PlayStation 4 DualShock Joystick Gamepad Gaming Controller for PS4 PC Switch Raspberry Pi Retropie Emulators - Magma Red

  • Remappable Paddles - Work Out of The Box, Easily Remappable & Removable Back Paddles.
  • Re-designed Ergonomics - Improved, Enlarged Grip and Non-slip Texture Provides Precise and Secure Handling, Outperforms the Stock PS4 Controllers..
  • Long Battery-life - Built-in 1000 mAh Rechargeable Battery, Type-C Fast Charging Port, Up to 8 Hrs Gaming Time..
  • Firmware Upgradeable - Your Gaming Needs Are Changing, So We Improve Our Product Continuously. Firmware Can Be Upgraded via the USB C Port..
  • Customize-able - The Shell & Back Paddles Support Customization, We Have Tons of Options for You. Please Contact Custom Service for More Details..
Check Stock