Top Enduring Clamping Systems

Sentry XB200 Gamer Headset with Microphone for Microsoft XBOX 360

  • 30% greater active noise reduction than conventional aviation headsets. Connectivity Technology: Wired/Wireless.
  • 30% less clamping force than conventional aviation headsets. The ergonomic control module includes an auxiliary audio input with intercom/AUX priority switching, ideal for dedicated GPS and traffic warning systems.
  • Clear audio with active equalization. Simple, intuitive headset operation plug it in, turn it on, go flying.
  • Now with Bluetooth audio and communications interface for connectivity with your communications and navigation devices.
  • Customizable audio prioritization control lets you mute an audio signal when receiving a communication, or mix the two together.
Check Stock

POWERTEC 70215 2-Inch Double Wire Hose Clamp | 5-Pack

  • INCLUDES: 2 inch Double Wire Hose Clamps – Pack of 5.
  • APPLICATION: These carbon double wire clamps with zinc coating are perfect for rubber and PVC hoses, and work brilliantly with spiral wire dust collection systems, industrial vacuum cleaners, or even pool pump hoses.
  • QUALITY: Delivers a heavy duty, leak proof and corrosion resistant hose clamping tool constructed out of premium grade stainless steel built for durability.
  • FUNCTIONALITY: 2” ring hose clamps designed to provide a secure and flexible option for connecting pipes to dust hoods, blast gates and other dust collection fittings.
  • EASY TO USE: Simple release and tighten the screw to adjust the clamp diameter.
Check Stock

POWERTEC 70197 2-1/2-Inch Double Wire Hose Clamp | 5-Pack

  • "INCLUDES: 2.5 inch Double Wire Hose Clamps – Pack of 5".
  • APPLICATION: These carbon double wire clamps with zinc coating are perfect for rubber and PVC hoses, and work brilliantly with spiral wire dust collection systems, industrial vacuum cleaners, or even pool pump hoses.
  • QUALITY: Delivers a heavy duty, leak proof and corrosion resistant hose clamping tool constructed out of premium grade stainless steel built for durability.
  • FUNCTIONALITY: 2-1/2” ring hose clamps designed to provide a secure and flexible option for connecting pipes to dust hoods, blast gates and other dust collection fittings.
  • "EASY TO USE: Simple release and tighten the screw to adjust the clamp diameter".
Check Stock

AQUANEAT Aquarium 4 x2 Cylinder Air Stone Fish Tank Aerator Diffuser Hydroponics 10 pcs

  • Small but Enduring: Each cylinder measures 1.5" D x 0.7" T and weighs 1 oz. Small but well-constructed for continual bubbling. Ideal for fish tanks,....
  • Medium Bubbles: The air stone discs produce a good amount of dense bubbles. A great way to increase oxygen solubility in your aquarium and enliven the....
  • Standard ID airline tubing: 3/16". Also great for DWC systems of small....
  • Reliable Material: Made of mineral material and sintered at a high temperature, it causes no effect to the health of your aquatics. Keep fish or roots....
  • Easy to Use: Soak the stone completely in water for 1 hour before use. Clean it regularly with a brush as it gets clogged after weeks or months of....
Check Stock

RPG 4X New Commercial Gauge Wheel Axle for John Deere X700 Series 1023 1025 TCU19299

  • This item is shaft holder,with this SHF shaft holder made of aluminum, depending on the size, suitable shafts can be attached quickly and easily..
  • The applications are extensive,such as measuring systems, printing equipment, and computer numerical control (CNC) tools,3D printer..etc, especially in bearing purpose..
  • Type: Shaft Holder /Install Method : Horizontal /Material: Aluminum Alloy /Compatible Model: SHF 8A.
  • Shaft Diameter: 8mm /Locking Bolt: M4 /Clamping Bolt: M5 /Dimensions: 43*10*5mm (W*L*T).
  • Package Included: 2 x Horizontal Shaft Holder.
Check Stock

TSPROF Whole-Milled Fillet Clamps (2pcs)

  • TSPROF Whole-milled fillet clamps are designed for clamping knives with a spine thickness up to 3.5 mm, suitable for K03 and Kadet Expert sharpening systems. The shape of the outer surface is radially convex, it allows you to set the minimum sharpening angles. The minimum sharpening angle is 7.2 degrees. The clamps are made of a single piece of aluminum, allowing you to adjust the clamp to any shape of the blade and ensure the symmetry of the installation..
  • Thanks to the two gripping points, the deflection of the blade is impossible. It is possible to move the clamps independently, along the entire length of the frame. There is no need for calibration. With these clamps, it becomes possible to sharpen knives with "Scandinavian bevels" along the line of bevels..
Check Stock

IRWIN QUICK-GRIP C Clamp, 4-Inch (225104)

  • Clamp features a double-rolled thread for faster clamping and increased durability.
  • C-clamp has a larger swivel pad to reduce marring on work surfaces and increase stability.
  • Larger handle for greater clamping pressure with less effort and reduced hand fatigue.
Check Stock

Bessey One Hand Trigger Clamps Medium EZR-SET

  • Set of 2 Track Clamps 6" Capacity Throat Depth 2 3/8" for use on track saw guides, 100 lb force.
  • Quick clamping, smooth operating, consistent clamping force for track saw quides & general clamping /spreading.
  • 4 5/8" to 12 1/8" spreading capacity, simple push button for reversing fixed jaw for change to spreading, no tools needed.
  • V-Grooved, non marring pressure pads included.
  • "Step Over" design jaw allows clamping over obstructions, includes ergonomic comfortable soft grips for easy clamping.
Check Stock

Bessey DUO65-8 24-Inch DuoKlamp One Hand Clamp/Spreader

  • Just turn the knob to change from clamping to spreading while using only one hand.
  • Large flat clamping jaws with soft pads allows clamping sensitive surfaces, right angles and both rounded and pointed work pieces.
  • 24" capacity with 800 lbs of clamping and spreading force.
  • Innovative pump lever allows effort free clamping or spreading.
  • Quick release of jaws with the push of a buttonDescriptionJMCDUO65-8 Features: -DUOKLAMP. -UNSPC CODE: 27112100. -Clamps Clamps mro plant maintenance clamp. -3 1/4IN x 24IN ONE-HANDED. Product Type: -Clamps..
Check Stock

BESSEY KRE3550 PAIR 50' K Body REVO Parallel Bar Clamp Now With Hex Key Clamping

  • Two (2) 50" KRE3550 clamps: 50" of clamping capacity, a 3-3/4" throat depth, a 10" to 52-1/2" spreading capacity, and up to 1700 lbs. of clamping force!.
  • Newly-designed 2-part handle can receive a hex key or driver in its end to provide more clamping force if desired, or just easier clamping for those who have issues with wrist strength..
  • Improved operating jaw design means once you put it in place, it stays in place and is ready for clamping..
  • Comes equipped with three removable pressure caps for the clamping surfaces that are glue-, paint-, and solvent-resistant and help provide protection for delicate work-pieces.
  • and two adjustable and removable work-piece supports on the bar prevent any contact between the bar and your project..
  • Easily converts to spreader without tools!.
Check Stock

BESSEY KRE3531 PAIR 31' K Body REVO Parallel Bar Clamp Now With Hex Key Clamping

  • Two (2) 31" KRE3531 clamps: 31" of clamping capacity, a 3-3/4" throat depth, a 10" to 36-1/2" spreading capacity, and up to 1700 lbs. of clamping force!.
  • Newly-designed 2-part handle can receive a hex key or driver in its end to provide more clamping force if desired, or just easier clamping for those who have issues with wrist strength..
  • Improved operating jaw design means once you put it in place, it stays in place and is ready for clamping..
  • Comes equipped with three removable pressure caps for the clamping surfaces that are glue-, paint-, and solvent-resistant and help provide protection for delicate work-pieces.
  • and two adjustable and removable work-piece supports on the bar prevent any contact between the bar and your project..
  • Easily converts to spreader without tools!.
Check Stock

BESSEY KRE3524 PAIR 24' K Body REVO Parallel Bar Clamp Now With Hex Key Clamping

  • Two (2) 24" KRE3524 clamps: 24" of clamping capacity, a 3-3/4" throat depth, a 10" to 28-3/4" spreading capacity, and up to 1700 lbs. of clamping force!.
  • Newly-designed 2-part handle can receive a hex key or driver in its end to provide more clamping force if desired, or just easier clamping for those who have issues with wrist strength..
  • Improved operating jaw design means once you put it in place, it stays in place and is ready for clamping..
  • Comes equipped with three removable pressure caps for the clamping surfaces that are glue-, paint-, and solvent-resistant and help provide protection for delicate work-pieces.
  • and two adjustable and removable work-piece supports on the bar prevent any contact between the bar and your project..
  • Easily converts to spreader without tools!.
Check Stock