Top Engine Front Crankshaft Seal Kit

Vals e Lönn

  • APPLICATIONS - Compatible with Cummins ISX12, X15 and ISX15 engines with single overhead cam.
  • BENEFITS - Use to remove and install front crankshaft seal and wear sleeve without damaging the seal and leakage.
  • REPLACEMENT - This is a high-quality aftermarket product. Directly replace part numbers 4918991. Each part is manufactured to OEM specifications and....
  • QUALITY - Advanced CNC machined heavy duty steel with black anodized finish.
  • INCLUDES - The 4918991 crankshaft seal kit includes:(1)Sleeve Remover.
Check Stock

Wrench Rabbit New Complete Engine Rebuild Kits for Yamaha R Raptor (05-13), YFM 350 X Warrior (87-04) WR101-209 , Black

  • Vertex Piston Kit standard compression piston, rings, pin and clips. Hot Rods Heavy Duty crank stock stroke - includes wrist pin bearing for two strokes. Hot Rods main bearing/seal kit Hot Rods transmission bearing kit includes transmission bearings, output shaft collar and sprocket lock washer. Hot Rods counter balancer bearing. Kit Hot Rods water pump bearing and seal kit. Vertex complete gaskets kit including seals and O-ring kit (covers top and bottom). Hot Cams cam chain..
  • Fit: Convenient one stop shop in a box! Kit contains oversized +0.5mm piston kit, heavy duty crankshaft, main bearing and seal kit, balancer bearing kit, transmission bearing kit, waterpump bearing and seal kit, complete gasket and seal set, and cam chain (if applicable).
  • Meets or Exceeds OEM Specs for Fit and Performance.
Check Stock

Crankshaft Rear Main Seal and Wear Ring Installer Tool Replacement for Engine 4.5L 6.0L 6.4L Diesel Alt 303-770

  • Replacement for 4.5L Diesel - Low Cab Forward (2006-2009).
  • 6.0L Diesel - F650/750 Super Duty (2005-2007).
  • 6.4L Diesel - F250/350/450/550 Super Duty (2004-2010 & VT365 International).Installation instructions are not included.
  • OEM Replacement part # 303-770. ZTSE4515C ZTSE4515. Universal, used to install the Crankshaft Rear Seal Wear Ring for 4.5L, 6.0L, 6.4L Powerstroke and work in an easier way to save your time and money.
  • Material: All components made of high quality carbon steel, impact resiatant, excellent solid and durable.
  • Universal fits for installation of Crankshaft Rear Seal Wear Ring for 4.5L,6.0L,6.4L Powerstroke .This tool is needed to prevent your seal from leaking.Designed to eliminate lip flare on the wear sleeve and install the crankshaft rear seal wear ring on 4.5L, 6.0L & 6.4L powerstroke engine properly.
  • This rear main seal installer tool can help you install the crankshaft wear ring, rear seal and rear seal carrier effortlessly. The wear ring is automatically installed to the proper depth.
Check Stock

HuaxiaZM Timing Belt and Water Pump Kit Timing Belt Kit for 03-18 Honda Accord, Pilot, Odyssey, Ridgeline, Acura TL V6 Engine Rca 14400-RCA-A01

  • 【PRODUCT FEATURES】Quality water pump automotive product to make your car safe. The crankshaft to ensure that the pistons and valves operate together in proper sequence, helps the motor run properly and enhances fuel efficiency.
  • 【Compatible】Water pump timing belt kit fits for Honda Accord Pilot Odyssey Ridgeline Crosstour Acura TL V6 and also Acura RDX MDX RL TL TSX ZDX. Not applicable for 2015 Hond Crosstour （belt oe: 31110-5G0-A01）.
  • 【Kit Include & Replacement OE】1 x Timing Belt (oe: 14400-RCA-A01), 1 x Tensioner Roller (oe: 14510-RCA-A01), 1 x Hydraulic Tensioner (oe: 14520-RCA-A01), 1 x Idler Pulley (oe: 14550-RCA-A01), 1 x Front Crankshaft Seal (oe: 91212-R70-A02), 2 x Camshaft Seals (oe: 91213-R70-A01), 1 x Serpentine Drive Belt (oe: 38920-RCA-A01, 6PK2135), 1 x Water Pump & Gasket (oe: 19200-RDV-J01).
  • 【Special Reminder】If the belt is damaged, it may be due to one of the two gears stop working and the tension on the other side causes breakage, don't worry, please contact us in time to help you solve the problem together.
Check Stock

Fire Apparatus Driver/Operator: Pump, Aerial, Tiller, and Mobile Water Supply

  • 【REPLACE PART NUMBER】 Water pump & gasket : 16100-09201丨 Hydraulic tensioner : 13540-50030丨 Thermostat : 90916-03100丨 Tensioner roller / pulley : 13503-0F010 / 13503-50011 | Idler roller / pulley : 13505-0F010 / 13505-50030丨 Front camshaft seals : 90311-38065丨 Front crankshaft seal : 90311-A0001丨 Timing belt : 13568-09070丨 Serpentine drive belt :90916-02586.
  • 【FIT FOR LEXUS】 1998-2000 GS400 丨 2001-2007 GS430 丨 2003-2009 GX470 丨 1990-2000 LS400 丨 2001-2006 LS430 丨 1998-2007 LX470 丨 1992-2000 SC400 丨 2002-2010 SC430.
  • 【FIT FOR TOYOTA 】 2003-2009 4RUNNER 丨1998-2007 LAND CRUISER 丨2001-2009 SEQUOIA 丨 2000-2009 TUNDRA.
  • 【WHAT WILL YOU GET】 1*Water Pump Gasket丨 1*Hydraulic Tensioner 丨1* Thermostat 丨 1*Tensioner Roller丨 1*Idler Roller丨 2*Front Camshaft Seals丨 1* Front Crankshaft Seal丨 1*Timing Belt丨 1*Serpentine Drive Belt丨 Totally 10 Pieces Set of Timing Belt Water Pump Kit.
  • 【SALE SERVICE】 Please Check Carefully Whether the Oe Number of Our Product Is Applicable to Your Vehicle‘s Model Before Purchasing. Whenever I....
Check Stock

Dayco 5060923DR Serpentine Belt

  • PACKAGE INCLUDE:1 Timing Belt (142 teeth),1 Water Pump with gasket,1 Timing Belt Tensioner,1 Timing Belt Idler Roller,4 Camshaft Seals,1 Crankshaft Seal..
  • FIT FOR :Replacement for timing belt kit water pump 2003-2006 for VOLVO XC70 XC90 2.5T, 04-06 VOLVO S80 S60,engine from 3188689 and other models below..
  • OEM STANDARD:All the components are produced under strictly observed and meet OEM performance requirements,part number 30751700, 30637955, 274338, 8630590.
  • SUPER QUALITY:High performance material can reduce the crack caused by belt deformation and extend the service life..
  • ADVANTAGE:Less noise, less resistance and smoother operation,it can make the normal power output and acceleration performance of the engine, reduce the spoilage of the car..
Check Stock

OCPTY Timing Belt Kit Including Timing Belt Water Pump with Gasket tensioner Bearing etc, Compatible for 1997 1998 1999 Acura CL/1994 1995 1996 1997 1998 1999 2000 2001 2002 Honda Accord

  • TIMING BELT KIT FITMENT – Fit for 1997 1998 1999 Acura CL/1994 1995 1996 1997 1998 1999 2000 2001 2002 Honda Accord/1998 Honda Odyssey/1998 1999 Isuzu Oasis,please confirm this item fits for your vehicle before purchasing by checking fitment chart above or contact us..
  • Functions and advantages – The air distribution structure of the driving engine enables the engine to properly open and close at the time of intake and exhaust, which ensures that the engine cylinder can be opened and closed normally, with low noise of gauge belt, low transmission resistance and longer service life..
  • TIMING BELT KIT INCLUDE – 1 Timing Belt (112 round teeth),1 Balance Shaft Belt ( 70 teeth),1 Timing Belt Tensioner,1 Balance Shaft Tensioner,1 Camshaft Seal,1 Crankshaft Seal,1 Water Pump with Gasket. (As the picture shown).
  • TIMING BELT SET WARRANTY – 100% tested for performance and durability by factory and 1-year warranty is provided/offered.Please contact us first if you have any questions..
  • NOTE – These belts are designed for the professional installer. It does not come with any installation instructions. If you do not have a service manual, please consult a professional mechanic prior to installing this kit..
Check Stock

For Power stroke 6.7L Front and Rear Crankshaft Seal Installer Remover Master Set Fit for 2011-2021 Ford Super Duty Diesel F-250 F350 F-450 F-550 F-650 F-750 Alt to 303-1509 303-1514 303-1513 303-1510

  • Function -- This is a master tool set that can remove and install all the front and rear crankshaft seals. This professional tool set will absolutely save your time and energy to do the work. They are same or exceed the OEM function and quality..
  • Fitment -- Fits for 2011-2021 Ford Super Duty F-250 F-350 F-450 F550 equipped for Power Stroke Diesel 6.7L and 2016-2021 Ford Super Duty F-650 F-750 equipped for Power Stroke Diesel 6.7L..
  • Include -- 1 * 303-1509 & 303-1509-01 6.7L Front Crankshaft Seal Installer Tool Alt ST-137B. 1 * 303-1510 6.7L Front Crankshaft Seal Remover Alt ST-152. 1 * 303-1514 6.7L Rear Crankshaft Seal Installer Alt ST-138. 1 * 303-1513 6.7L Rear Crankshaft Seal Remover Alt ST-148..
  • Material -- Made of premium heavy-duty hard steel with black coated for rust and corrosion resistance, hardened construction for high strength and impact resistance, this tool is top quality and durability that can serve for a much longer time..
  • Satisfaction Guarantee -- Yoursme aims to provide excellent products and best service for customers. You can simply return it if you are not satisfied with the product. We support 30 days full refund for return and 12 month warranty..
Check Stock

303-1510 6.7L Power Stroke Front Crankshaft Seal Remover Alt ST-152 Fit for 2011-2019 Ford Super Duty F-250, F-350, F-450 and F-550, 2016-2019 Ford Super Duty F-650 F-750

  • Fitment: 6.7L Power Stroke Diesel Front Crankshaft Seal Remover fits for 2011-2019 Ford Super Duty F-250, F-350, F-450 and F-550, 2016-2019 Ford Super Duty F-650 F-750.
  • High Quality: Machined from heavy duty steel with excellent mechanical and physical properties, this removal tool is good in corrosion resistance and durability.
  • Application: Used for the removal of front crankshaft seal without damaging the seal, it credibly prevents the seal from leaking.
  • Features: Simple to use, impossible to mess up, and well built. Recommend to anyone in the service industry (Directly replace part numbers 303-1510).
  • 100% SATISFACTION GUARANTEE: If you're not 100% satisfied with Sunluway Front Crankshaft Seal Remover, simply return it for a full refund in 30 days. Premium Support & 12-Month Warranty.
Check Stock

OCPTY OCPTY Harmonic Balancer Crankshaft Belt Drive Pulley Fit For 2005-2007 2010 for Scion tC 2008-2015 for Scion xB 2009-2013 for Toyota Matrix 2001-2008 for Toyota RAV4 2002-2008 for Toyota Solara

  • COMPATIBLE MODELS - Fit 2007 2008 2009 2010 2011 2012 2013 Nissan Altima, 2007 2008 2009 2010 2011 2012 Nissan Sentra.
  • PART NUMBERS - Replace for 1340700H010 1347028020 134700H010 594-198 number crankshaft pulley harmonic balancer.
  • PRODUCT DETAILS - The crankshaft pulley is one of the key functional components on the gasoline engine, which is installed on the front end of the crankshaft and rotates with the crankshaft. It is to drive the power source of other engine accessories, relying on the transmission belt to drive generators, pumps, booster pumps, compressors and other operations.
  • REPLACE ADVANTAGES - Manufactured to OE design ensuring each balancer will install properly and function as intended.Dynamically balanced for proper absorption of the crankshaft vibrations.
  • PLEASE NOTE - Please check car make model trim engine,product appearance and part number to make sure this is the right part you need.Any question you have please contact us for a answer.
Check Stock

Cam Phaser Locking Tool and Crankshaft Positioning Tool Crankshaft Wrench Holder Fit for Ford 1993 4.2L/4.6L 2-valve,4.6L 4-valve 5.4L/6.8L V8 Similar to Rotunda 303-448,T93P-6303-A,6024&525219

  • FITMENT(Crankshaft Positioning Tool):1993 and newer 4.2L/4.6L 2-valve engines,4.6L 4-valve and 5.4L and 6.8L V-8 engines..
  • FITMENT(Cam Phaser Locking Tool):Expedition 5.4L 3V 2005-2011.
  • F-250/350/450/550 5.4L 3V 2005-2009.Mark LT 5.4L 3V 2006-2008.
  • Mountaineer 4.6L 3V 2006-2010.Mustang 4.6L 3V 2005-2010.
  • Navigator 5.4L 3V 2005-2012.Similar to Rotunda 303-448,6024,525219..
  • MATERIAL And DESIGN(Cam Phaser Locking Tool):Hardened chrome molybdenum steel,resistance on rust,deformation and crack.Designed with a triangle shape with four holes to perfectly fits for your cam phaser.It is a quite available accessory to make you do the phaser job with ease..
  • USAGE(Crankshaft Positioning Tool):This tool slides easily over the crankshaft and seamlessly locks into place with the Wood ruff key.You only need to rotate the crankshaft with tool attached to crank so that the slot in the handle locks into the engine cover alignment dowel pin,ensuring the engine is at the correct TDC point avoiding extreme damage and costly repairs..
  • CORRECT INSTALLATION POSITION(Crankshaft Positioning Tool):Easily installs over the crankshaft and engine front cover alignment dowel to position the crankshaft at top-dead-center..
Check Stock

Front Cover Crankshaft Seal Installer Installation Tools Campatible with 1989-Current Cummins 3.9L 5.9L 6.7L Replaces 3824498 1338

  • Wide Application – Compatible with 1989-2020 Cummins 3.9L 5.9L 6.7L, especially suitable for 1989-2016 Cummins 4BT 3.9L, B Series 5.9L, ISB 5.9L 6.7L and QSB 5.9L 6.7L..
  • Replacement – OE# 3824498 1338, with seal numbers 3937111 and 3904353 or the seals in kit 3802820 installed..
  • High-Quality Materials – Made of top-quality wear-resistance steel, durable and anti-corrosion, repeatedly tested and optimized to ensure its excellent performance and a long service life..
  • Function - This kit is specially used to correctly place the crankshaft sealing ring during the installation process, avoid any leakage due to uneven placement and make the work proceed in a correct and orderly manner..
  • Package Include - 1*Front Cover Crankshaft Seal Installation Tool. -----Any other problem about the product, please feel free to contact us. If you are not satisified with the item, please feel free to return it back and we will refund full back to you. If the item has defect, please contact us, we take all the responsibility and reissue it for free without hesitation..
Check Stock