Top Engine Intake Manifold Gasket Kit

Dorman 615-380 Engine Intake Manifold for Select Buick/Chevrolet Models OE FIX

  • Improved design - this intake manifold has been redesigned to correct a common PCV valve failure in the original equipment design to reduce excessive....
  • Complete kit - this manifold includes a new throttle body gasket, port gaskets, fuel injector O-rings, MAP sensor O-ring and screws for a complete....
  • Quality American construction - this intake manifold is engineered and manufactured in the United States of tough nylon polymer to resist cracking and....
  • Related repair - this manifold often leads to failure in the valve cover's PCV diaphragm.
  • a damaged valve cover will often need to be replaced at the....
  • Ensure fit – to make sure this part fits your exact vehicle, input your make, model and trim level into the Amazon Garage.
Check Stock

Mota Performance A40252 Manifold Heat Spacer Kit - 1\ Ford GT40

  • Manufactured from heat resistant phenolic resin.
  • Cooler and denser upper intake air improves throttle response and performance.
  • Manufactured from heat absorbing phenolic resin.
  • Insulates Throttle Body and Manifold from engine heat.
Check Stock

Mota Performance A40250 Manifold Heat Spacer Kit - 1/2\ Ford GT40

  • Manufactured from heat resistant phenolic resin.
  • Cooler and denser upper intake air improves throttle response and performance.
  • Manufactured from heat absorbing phenolic resin.
  • Insulates Throttle Body and Manifold from engine heat.
Check Stock

5.3L AFM DOD Replacement Kit Lifters Camshaft Head Gaskets for 2005-2014 Buick Chevy Avalanche Silverado Suburban Tahoe Trailblazer Envoy Sierra Yukon V8

  • 5.3 overhaul kit include: multiple layers steel (MLS) head gasket, valve cover gasket, valve stem seals, intake manifold gasket, exhaust manifold gasket, front camshaft seal, o-rings, other small gaskets, 30 cylinder head bolts (20 long bolts: 100mm, 10 small bolts: 45mm), 8 AFM (active fuel management) hydraulic roller lifters, 8 NON-AFM hydraulic roller lifters, 4 AFM lifter tray w/ bolts, replacement dod camshaft (single bolt).
  • AFM kit fit for 2005-2007 Buick Rainier 5.3l V8, for 2005-2006 Isuzu Ascender 5.3l V8, for 2005-2009 Saab 9-7x 5.3l V8.
  • 5.3 head gasket kit for 2007-2013 Chevrolet Avalanche 5.3l V8, for 2007-2009 Chevrolet Avalanche 5.3l V8, for 2007 Chevrolet Silverado 1500 Classic 5.3l V8, for 2005-2013 Chevrolet Silverado 1500 5.3l V8, for 2007-2014 Chevrolet Suburban 1500 5.3l V8, for 2007-2014 Chevrolet Tahoe 5.3l V8, for 2005-2008 Chevrolet Trailblazer 5.3l V8.
  • AFM lifter and camshaft for 2005-2006 GMC Envoy Xl 5.3l V8, for 2005 GMC Envoy Xuv 5.3l V8, for 2005-2009 GMC Envoy 5.3l V8, for 2007 GMC Sierra 1500 Classic 5.3l V8, for 2005-2013 GMC Sierra 1500 5.3l V8, for 2010-2013 GMC Sierra 5.3l V8, for 2007-2....
Check Stock

LIMICAR Cylinder Head Gasket Set Head Bolts ES72173 (1st Generation) Compatible w/ 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 Chevrolet Silverado Tahoe GMC Yukon Envoy Buick Cadillac 4.8L 5.3L

  • ...Head Gasket systems can withstand high pressures, high temperatures and aggressive media of a car. LIMICAR give technicians not only the gaskets the project requires, but the very best technology available..
  • ✅Package Inclued: Multi-layered Steel(MLS) Head Gaskets.
  • 30PCS Head Bolts(ES72173 1st Generation)..
  • ✅NOTICE: Please check the description and compatibility chart before your purchasing. Head Bolts Size 1: Quantity: 16, Length(mm): 155, Thread Pitch(mm): 2, Thread Size: M11. Head Bolts Size 2: Quantity: 4, Length(mm): 100, Thread Pitch(mm): 2, Thread Size: M11. Head Bolts Size 3: Quantity: 10, Length(mm): 45, Thread Pitch(mm): 1.25, Thread Size: M8..
Check Stock

GOOFIT Fuel Filter 90 Degree Bent Intake Manifold Pipe with Intake Manifold Gasket Spacer Replacement for 50cc 70cc 90cc 110cc 125cc Taotao Roketa ATV Dirt Bike Go Kart 4 Wheeler

  • Size:Intake Manifold Pipe:Inside diameter:18mm/0.71",27mm/1.07",Mounting hole 45mm/1.78".
  • Gasket Spacer:Opening diameter:19mm/0.75",distance between....
  • Replacement for 50cc 70cc 90cc 110cc 125cc Taotao Roketa ATV Dirt Bike Go Kart 4 Wheeler.
  • Replacement for 50cc 70cc 90cc 110cc horizontal engine ATV scooter carburetor.
  • Package including:Fuel Pump Petcock x 1pc,Intake Manifold Pipe x 1pc,Gasket Spacer x 1pair,GOOFIT keychain x 1pc.
  • Warranty:We are always available to help our customers.Please message us for replacement or refund if you are not satisfied with the order.
Check Stock

New MLS Head Gasket Set, Head Bolt Kit, Intake & Exhaust Engine Valves Compatible with 99-05 SAAB/SUBARU 2.5L 2458CC H4 SOHC, (16 Valve),”EJ25″

  • Aftermarket OE Replacement : Meets or exceeds OE standard quality and performance requirements..
  • COMPATIBLE WITH: 1999-05 Subaru Saab 2.5L 2458CC H4 “SOHC” (16-Valves) Eng.Code “EJ25”.
  • Includes : MLS (Multi-Layered Steel) Head Gasket (Improved Design) Intake Manifold Gaskets Exhaust Manifold Gaskets Valve Cover Gaskets Spark Plug Tube Seals Grommets Viton Valve Stem Seals Camshaft Front Seals Circular Plug (Valve Cover) EGR Valve Gasket Throttle Body Mounting Gasket Other Small Gaskets, Seals, And O-Rings Head Bolt Set (12 Pcs) RTV Gasket Silicone (Silicone brand may vary depending on availability) Intake & Exhaust Valves (16 Pcs).
  • Note : Upper Intake Manifold Gaskets (Plenum Gaskets) are “NOT” Included.
  • CONFIRM THIS PART FITS YOUR VEHICLE BEFORE PURCHASING (Check Fitment Data Above).
Check Stock

E1840P Sloppy Mechanics Stage 2 Camshaft LS7 Lifter 1218 Valve Spring Head Gaskets Bolts Kit for 1997-2007 LS LS1 5.3L 5.7L Engine

  • Cam and lifter kit include: 1 intake seal set, 1 timing cover gasket set, 1 valley cover gasket, 1 oil pan gasket, 2 exhaust manifold gaskets, 1 rear main seal, 1 rear main cover gasket, 2 multilayer steel cylinder head gaskets, 30 cylinder head bolts, 16 ls7 valve lifters, 16 beehive valve springs, 1 e-1840-p camshaft.
  • E1840P camshaft kit fit for 1997-2007 GM Chevy LS L92 L99 5.3L 5.7L V8 LSx Sloppy Stage 2.
  • 16pcs valve springs: outside diameter of outer spring (in): 1.290 in.
  • inside diameter of outer spring (in): 0.885 in.
  • We offer you a 12-month warranty. Any problems, just contact us through email, we ....
Check Stock

Intake Manifold w/Runner Control Valve & Air Pressure Sensor Compatible with 09-17 Dodge Journey Avenger/Jeep Compass Patriot/Chrysler Sebring 1.8L 2.0L 2.4L Part# 4884495AK 4884495AH 911-902

  • ...ble marerial to meet or exceed OE standard quality and performance requirements. ✴ The gasket with upgrade materials to ensure a perfect seal with no risk of leaking. ✴ Heat stabilized nylon providing better resistance to cold/hot cycles and further prevent any chances of cracking..
  • ✔ 【PACKAGE】1 pcs Intake Manifold kit Includes: 1 * NEW Intake Manifold with Gasket + 1 * NEW Flow Control Valve & 1 * NEW Air Pressure Valve with Bolts and washers【NOTE】 Please reference to the first picture as shown..
  • ✔ 【EXCAT MATCH】 Engines: 1.8L/ 2.0L/ 2.4L ✴ 2007-2010 Jeep Patriot, Jeep Compass, Dodge Caliber ✴ 2011-2017 Jeep Patriot, Jeep Compass, Dodge Caliber - 2.4L ✴ 2007-2010 Chrysler Sebring & Dodge Avenger - 2.0L 2.4L ✴ 2009-2011 Dodge Journey Engine - 1.8L, 2.0L, 2.4L (Pls check detailed fitment in the product description below.).
  • ✔ 【OE NUMBERS】 4884495AK/ 4884495AH/ 4884495AI/ 4884495AJ/ 4884495AC/ 4884495AD/ 4884495AE/ 4884495AF/ 4884495AG/ 911-902.
  • ✔ 【PURCHASE WITH CONFIDENCE】In BSOC AUTO Store, right parts are guaranteed. If you are not sure about the vehicle fitment or the part ever fails on your vehicle after purchase, please contact us and we’ll take care of it. 30 Days money back and one years replacement warranty ....
Check Stock

A-Premium Left Exhaust Manifold Kit with Gasket Compatible with Nissan Frontier 2005-2019 Pathfinder 2005-2012 NV1500 NV2500 NV3500 2012-2021 Xterra 4.0L

  • 【Vehicle Fitment】This Exhaust Manifold Kit is Compatible with Nissan Frontier 2005-2019, NV1500/NV2500/NV3500 2012-2021, Pathfinder 2005-2012, Xterra 2005-2015---V6 4.0L.
  • 【Durable Construction】This exhaust manifold set is made of solid metal which can resist heat, cold, warping and corrosion, and restore engine proper operation.
  • 【Reference Number】The A-Premium Exhaust Manifold Kit's reference number: 674-947, 674947, 14002EA210, 14002EA21A. Before placing an order, verify that the part is compatible with your vehicle using the compatibility system..
  • 【Customer Support】1 Year Unlimited-mileage Quality Guarantee.
  • With being sturdy and brand-new, this exhaust long tube headers is the ideal replacement. Please get in touch with us at any time if the product has any quality issues, such as damage or isn't appropriate for your automobile..
Check Stock

MOSTPLUS 615-175 329-01780 W7Z9424AA1 Intake Manifold Compatible with Ford Crown Victoria Explorer Mustang 4.6L

  • 【Fitment】— Compatible for 2001-08 Ford Crown Victoria Intake Manifold V8 4.6L (8th Vin Digit W) , Compatible for 2006-11 Ford Crown Victoria Intake Manifold V8 4.6L (8th Vin Digit V) , Compatible for 2001-05 Ford Crown Victoria Intake Manifold V8 4.6L (8th Vin Digit 9) , Compatible for 2002 Ford Explorer Intake Manifold V8 4.6L (8th Vin Digit W) , Compatible for 1999-04 Ford Mustang Intake Manifold V8 4.6L (8th Vin Digit X)(Detailed Apllication below).
  • 【OEM Part Number】 — 1W7Z9424AB, 329-01780,3W7Z9424AA,3W7Z9424AD,615-175.
  • 【Function】— The intake manifold supplies air to the cylinders of an engine. High quailty material, excellent performance, high resistance..
  • 【High Quality】— This intake manifold is made to meet or even exceed the standard quality to help your car start normally..
  • 【Note】— Not correct for models with coolant-heated PCV. Please check the year, make, model and trim of your vehicle in the garage before purchase..
Check Stock

HOLLEY MODULAR LO-RAM EFI MANIFOLD KIT,TOP-FEED PLENUM,BLACK FINISH,COMPATIBLE WITH GM LS1,LS2 & LS6 GEN III & IV ENGINES

  • Brand New Holley Modular Lo-Ram EFI Manifold Kit, Top-Feed Plenum, Black Finish, Compatible with LS1, LS2 & LS 6 Gen III & IV Engines (Part #300-620BK).
  • The 300-620 top-feed plenum entry configuration is designed to allow the included Hi-Ram 105mm plenum top to be fitted to a low-profile base intake manifold. The short runner, low-profile base intake manifold intended for forced induction applications was conceived to package with an air to water plenum mounted intercooler with a shorter overall height than possible with other existing intake manifolds..
  • The Holley LS1/2/6 Lo-Ram intake manifold kits are designed for GM LS Gen III & IV engines equipped with GM LS1/2/6 (cathedral port) cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The fuel rail kits come with 2 sets of brackets: A set for long (usually standard length) fuel injectors & set for short (such as Pico, or LS7) fuel injectors..
  • NOTE: Total Height: Top-Feed Plenum Configuration w/105mm Long. Mount EFI Plenum Top - 9.07" (without intercooler installed) | Top-Feed Plenum Configuration w/105mm Long. Mount EFI Plenum Top, w/ intercooler installed - 9.07" + intercooler thickness.
  • Specs: Brand: Holley EFI | Color: Black | Construction: Cast | Emission Code: 3 ....
Check Stock