Top Engine Load Leveler

RVGIVE Camper Leveler 2 Pack, RV Leveling Blocks Ramps Kit for Travel Trailer Up to 35,000 lbs, with 2 Levelers, 2 Chocks, 2 Mats, Carrying Bag, Faster & Easier Camper Leveling Than RV Leveling Blocks

  • 【DOUBLE ANTI-SLIP JOINTING SYSTEM】Camper leveler kit designed a special anti-slip jointing system with precise grip channels on the surface of the levelers to prevent levelers from sliding when backing the camper tire onto the levelers. Rubber mats can also increase the ground friction to prevent levelers silding..
  • 【HEAVY-DUTY CONSTRUCTION】RV leveler is built with high-performance polymer for mechanical load-bearing to last a lifetime. Works perfectly on any trailers that weighs up to 35,000 lbs with tires up to 32" diameter, it doesn't eventually break or compress under the weight of the trailer like other levelers made of PP..
  • 【EASY AND FAST LEVELING】Just accurately level the height, without the hassle of setting up your camper with travel trailer leveling blocks or planks under your tires. Simply level your trailer any increment between 1/2" and 4" in less than 5 minutes. Simply drive on it until on the level then chock, done!.
  • 【NO NEED TO TRIM FOR DUAL AXLE TRAILERS】Without any modicication when using with Dual Axle Trailers. Unlike other camper levelers that may needed to be cut to length to fit, make you cut the bottom of the leveler off. You don't need to level both sides of the trailer - only put them on the low side..
Check Stock

Artilife 4Pack Heavy Duty Furniture Leveler Legs 2 Inch Height Adjustable Feet and Hexagon Nuts Lock for Furniture, Cabinets, Workbench

  • 【L-Shaped Mounting Bracket】 Ensures the cabinet load is carried by the leveler, Not the screws. The leg leveler has 7/16” wide ledger,allows the mounting bracelet hooks onto the bottom edge of furniture for better support and stability..
  • 【Heavy Duty】Adjustable table legs are made of galvanized iron furniture legs that help you adjust and level your table, cabinets, workbench, shelving units, bookcase and more..
  • 【Versatile Threaded Legs】 The leveling feet have heavy 3/8"-16 (10mm) dia shaft that adjusts height from 0" to 2-1/2". Free spinning foot design compensates for uneven/ irregular floors..
  • 【Widely Use】Leveling feet is perfect for leveling applications, balance - adjustments to table, cabinets, workbench, shelving units, bookcase and more..
  • 【Package Included】4 x Leveler Legs, 16 x Screws, 4 x Locknuts, 1 x Hex Wrench..
Check Stock

Artilife 8Pack Heavy Duty Furniture Leveler Legs 2 Inch Height Adjustable Feet and Hexagon Nuts Lock for Furniture, Cabinets, Workbench

  • 【L-Shaped Mounting Bracket】 Ensures the cabinet load is carried by the leveler, Not the screws. The leg leveler has 7/16” wide ledger,allows the mounting bracelet hooks onto the bottom edge of furniture for better support and stability..
  • 【Heavy Duty】Adjustable leg is made of galvanized iron furniture legs that help you adjust and level your table, cabinets, workbench, shelving units, bookcase and more..
  • 【Versatile Threaded Legs】 The leveling feet have heavy 3/8"-16 (10mm) dia shaft that adjusts height from 0" to 2-1/2". Free spinning foot design compensates for uneven/ irregular floors..
  • 【Widely Use】Heavy duty leveling feet is perfect for leveling applications, balance - adjustments to table, cabinets, workbench, shelving units, bookcase and more..
  • 【Package Included】8 x Leveler Legs, 32 x Screws, 8 x Locknuts, 2 x Hex Wrench..
Check Stock

2-Pack Camper Leveler Kit- Heavy Duty RV Levelers RV Leveling Blocks Includes 2 Curved Levelers 2 Wheel Chocks 2 Anti-Slip Rubber Grip Mats for RV Camper Travel Trailer Motorhome Up to 30,000 lbs

  • [Quick & Precise Leveling] Our leveling kit allows you to level your camper in less than 5 minutes and lift between 1/2" and 4". It really saves you a lot of troubles and gives you more time to enjoy camping to the fullest..
  • [Wide Applicability] Our camper leveler kit is suitable for RVs, campers, trailers weighing up to 30,0000 lbs and with tires up to 32 inches in diameter. You need to trim the leveler properly if you want to use it for some dual-axle trailers..
  • [Reliable Quality] Thanks to the heavy-duty polymer material, our leveling blocks are extremely stable, load-bearing, impact-resistant and largely unaffected by weather such as rain, heat and hot sun. They are durable enough to serve you for a long time..
  • [Easy to Use] First you need to push the thin end of the leveler under the tire. Then slowly drive the camper onto the leveler and stop when you reach the desired leveling height. Finally, just put the chock under the warped leveler..
  • [Anti-Slip Grip Mats] We thoughtfully provide you with two rubber mats to make your leveling process smoother. They effectively increase the friction between the leveling blocks and the ground and prevent the displacement of the leveling blocks..
Check Stock

LEIOIAIY 2 Packs Camper Leveler, RV Leveling Ramp Chock Kit for Travel Trailer, Include Two Curved Levelers, Two Chocks, Two Rubber Grip Mats, RV Leveling Blocks Weight Capacity Up to 35,000 lbs

  • 【Fast & Precise Leveling】Get rid of the trouble of leveling your camper with blocks or planks under the tures. Easily level your trailer any increment between 1/2" and 4" within 5 minutes. Make leveling a fast and easy task..
  • 【Anti-Slip Design】Curved leveler and wheel chock are honeycomb structures designed, surface friction can be greatly increased under pressure. The rubber grip mat can stop leveler sliding..
  • 【Portable & Compact】The Leveler come to you in the storage bag. We provide a customized storage bag with handle to store and carry them. Occupies a very small volume..
  • 【Heavy Duty】The camper levelers are made from nylon polymers commonly and strong fibers with excellent load bearing properties. Honeycomb structure makes it steel solid under 35,000 pounds..
  • 【How to Use】Place the rubber grip mat, put the leveler on it then determine the height you need and drive the camper to level and stop, last, add the wheel block..
Check Stock

Hyever Leveling Screw Leg Heavy Duty Carbon Steel Nickel Plated 4\ Adjustable Feet Leveler for Furniture Mechanical Equipment Pack of 2

  • Total Size: 60mm（2.36") x 60mm（2.36") x 120mm(4.72")(L x W x H).
  • Load Capacity: 1100 lbs per mounts leveler.
  • Moisture-proof and Anti-corrosive: Carbon steel nickel plated base provides excellent corrosion resistance that will do keep the furniture or equipment dry and durable,it can be used as replacement feet install in heavy duty furniture or mechanical equipment.
  • Easy To Install: it can be install in funiture easily,drilling a hole in the bottom of the furniture or equipment first ,and then set the leveler to the level and height you desirable.
  • Application Place: it can be provide support,balance adjustment for mechanical equipment, shelves, assembly line production,heavy duty furniture,etc.
Check Stock

Heavy Duty Leveler Legs w/Lock Nuts - Leveling Feet for Furniture, Cabinets, & Workbench - 4 Pack

  • HEAVY DUTY - Made from 14 ga. (.080") steel. Load capacity is 2,000 lbs. per leg.
  • INTEGRAL LEDGER - Ensures that the load is carried by the leveler, not the screws.
  • LOCK NUTS INCLUDED - An absolute MUST for the workshop or garage, especially if any vibrating machinery is involved..
  • FREE SPINNING FOOT - Compensates for irregular floors. Polyethylene cap protects floors as it keeps moisture away.
  • YOU GET - 4 Legs, 16 Installation screws (#10 x 3/4"), 5mm hex wrenchDescriptionGot a 8,000 lb. workbench that needs leveling?... Read On!.
  • D.H.S. is pleased to offer a leveler that's tough as nails, but as easy to install as it is to adjust..
  • Housings are made from 14 ga. (.080"), zinc plated steel. Each has a 7/16" wide ledger that hooks under the cabinet. This ensures the load gets carried directly on the leveler, not the screws. BTW the screws we provide are no joke. They're 3/4" long #10 Philips head (nickel plated), perfect for supporting a bookcase with plywood sides or a workbench with 4 x 4 legs..
  • The legs have a 10mm dia. (a heavy 3/8") shaft that adjusts from 0" to 2-1/2". The feet are 1-1/4" dia. and spin freely on the threaded shaft. This allows them to tilt if your floor is really bad. Adjustments are easier too, as y....
Check Stock

KGDJS Camper Levelers 2 Pack - RV Leveling Blocks for Travel Trailer Include 2 Curved RV Levelers with 2 Camper Wheel Chocks, 2 Mats,1 Level,1 Bag, Heavy Duty Leveler Works for Camper Up to 35,000 LBs

  • ✔【Makes Leveling the RV Easily】 No more guessing how many rv leveling blocks to use. The rv leveling system can level your trailer in 5 minutes. Easily level your trailer any increment from 1/2 inch up to 4 inches. Each RV leveler is roughly 6" wide by 16" long. Used for tires no bigger than 32" diameter.
  • ✔【Heavy Duty Leveler Construction】 The camper levelers are built with a high-performance polymer to last a lifetime. Our rv levelers works with any trailer that weighs up to 35,000 lbs and with tires up to 32" diameter. Unlike other camper leveler that snap in half under 35,000 lbs of load, the honeycomb internal structure makes the rv levelers as solid as a rock that does not eventually break or compress under the weight of the trailer like other levelers do that are made of HDPE or PP.
  • ✔【Fast & Precise Leveling】 You only need one camper leveler per axle on one side of the trailer. With the rv blocks for leveling, you don't need to level both sides of the trailer - only put them on the low side. Make trailer leveling a fast and precise task with the use of a T-type level.
  • ✔【Non-slip and Safety】 This rv leveling blocks come with two curved rv levelers and two blocks. Both have honeycomb internal structures to enhance surface con....
Check Stock

Adjustable Feet Levelers, Heavy Duty Adjustable Legs for Furniture, Large Furniture Levelers, T Nut Levelers Table Adjustable Feet 3/8-16 Thread (8 Pack, Black)

  • {Wide Application}: The leveling feet adjustable can be used on any furniture leg to help it level the same height, such as tables, chairs, kitchen cabinets, and sofas. No matter at home or workplace that needs to be leveled or adjusted, it can be quickly solved by this furniture leveler..
  • {Flexible Adjustment}: The heavy-duty furniture leg levelers help to adjust the height of the furniture without affecting the appearance, so as to adjust the balance or increase the height. Diameter 1/2” Thick Base and Fully Adjustable Height from 3/4” to 1 3/4” for Maximum Support and Adjustability. The 3mm thickness felt pad with heavy-duty self-adhesive perfectly protects the floor..
  • {Clever Installation}: First drill a hole with a width of 0.55 inches, use a hammer to hammer in the inserted t-nut, and then screw the leg leveler to the desired position to complete the adjustment. And for furniture legs with existing 3/8"-16 thread, simply screw in the leg leveler to adjust the height..
  • {Package Included}: 8 × T- Nut Kit, 3/8”-16 Thread. 8 × 0.1'' thickness Felt Pads. adjustable furniture feet.
Check Stock

OwnMy Heavy Duty Adjustable Leveling Feet Hexagon Nuts Lock Furniture Legs Levelers for Furniture, Table, Cabinets, Workbench, Shelving Units and More

  • Heavy Duty adjustable leveler feet can level your uneven floor or furniture easily. Let's get rid of a wobbly table. Can adjust level in your need to avoid furniture be corrode in damp.
  • More Stability -The lip on the bottom design so the weight can be scattered, helps with the overall support isn't bearing totally on the screw connections.
  • With black rubber feet caps for grip, keep it solidly in place and not to damage your flooring, also protect from moisture. each leveler has a load-bearing capacity of 2000 pounds.
  • Perfect for cabinets, tables, workbench, support table or shelving units for a busy work area or garage, etc. Package includes: 4 x furniture feet, 16 x Screw, 1 x hex wrench, 1 x open-end wrench..
  • Dimension:M10 Thread, adjusts height from 0" to 2" feet caps Diameter:34mm.
Check Stock

[LOSCHEN] 8PCS Heavy Duty Adjustable Leveling Feet for Furniture,Hexagon Nuts Lock Furniture Legs Levelers,for Table, Cabinets, Workbench,Shelving Units and More

  • ...se are 8heavy gauge, Each plated steel furniture legs can be fine-tuned until they are perfectly level to the height you want. That help you adjust and level your table, cabinets, workbench, shelving units, bookcase and more.Holds Up to 400kg/880 lbs. Made of high quality steel with a 100kg/220 lbs capacity per leg leveler(Real Data)..
  • 【L-SHAPED MOUNTING BRACKET】Wide ledger,allows the mounting bracelet hooks onto the bottom edge of furniture to distribute the weight for better support and stability.Ensures the cabinet load is carried by the leve.
  • 【ADJUSTABLE FURNITURE LEVELER LEGS】The leveling feet have heavy 3/8″-16 (10mm) dia shaft that adjusts height from (2cm)0.78″ to (6cm)2-2/5″. With the wrench lock nut, you don’t have to worry about the bottom will fall off.Free spinning foot design compensates for uneven/ irregular floors. Rubber cap protects the carpet and floor and block moisture from getting to the foot,the floor surface no longer leaves rust spots..
  • 【PROTECTING FURNITURE】May be adjusted to reduce shock, vibration, tilting, and more. Helps with uneven floors.Often used as adjustable feet for workbench and furniture on any uneven surface. Helps Lift furniture and prevent it from getting damp.These heavy duty leveler legs he....
Check Stock

Wilton Adjustable Cake Leveler for Leveling and Torting 12 x 6.25-Inch

  • READY, SET, BAKE: This Wilton adjustable cake leveler is the quick and easy way to create even cake layers, consistent in height. The sturdy....
  • CONVENIENT: Measure the height you need on the Wilton cake leveler, starting from the feet up.
  • position wire into notches at desired height.
  • PERFORMANCE: The plastic feet on the Wilton cake leveler provide stability to keep an even cut all the way through, making this small leveler perfect....
  • CARE INSTRUCTIONS: This Wilton cake leveler is dishwasher safe.
  • however for best results, wash in warm, soapy water before first and after each use.
  • INCLUDES: 1 cake leveler, dimensions: 12 in (30.4 cm) wide and 6.25 in (15.8 cm) high.
Check Stock