Top Engine Oil Drain Hose

JIFETOR Fuel Injection Pump Pressure Test Gauge Set, Automotive Gas Gasoline Fuel Oil Injector Tester Tool Kit 0-140PSI, with Schrader Adapters Universal Compatible with Ford Auto Car Truck Motorcycle

  • FUEL PRESSURE GAUGE TESTER: Automotive fuel injector tester tests if the fuel supply & injection system work normally, help to judge if there are broken internal components or faulty oil lines. Specific tool for fuel system detecting and troubleshooting. Fuel pressure gauge kit suits a variety of gasoline engines on car, truck, SUV, Motorcycle, ATV, RV, etc (Bosch, CIS Jetronic, Throttle Body System on GM vehicles excluded), not for diesel high pressure injection pump or direct-injection engine.
  • UPGRADED FUEL PRESSURE GAUGE TOOL KIT: The set is equipped with various fittings and hoses to connect for testing. 15"L hose is used for hooking up directly to the 1/4" SAE standard Schrader valve on fuel pump, 5-1/2"L hose for small Schrader valve (compatible with some Ford), and 8"L hose for M6 fuel pressure test port, and there are also M8/M10/M12/M14 adapters for the corresponding test port on fuel rail. The aluminum tee can splice in-line between the fuel pump and engine for most vehicles.
  • 140PSI/10BAR PRECISION-MACHINED FUEL PUMP TESTER GAUGE: You just need to ensure there is an adapter in the kit suitable for your test port or the inline connection is workable for your car. Pressure gauge adopts rubber cover protected 3-1/2" large dial and dual color cod....
Check Stock

JIFETOR Oil Pressure Gauge Tester Kit Engine Transmission Fluid Test Tool Set 12PCS, 500psi Automotive Mechanical Automatic Gearbox Line Pressure Meter for Car Truck Motorcycle ATV

  • ENGINE AND TRANSMISSION OIL PRESSURE TEST AND DIAGNOSTIC: This oil pressure tester kit is used for measuring oil pressure on lubrication system quickly and accurately. The oil pressure gauge readings assist to diagnose if there are following problems: blocking oil strainer or oil filter, broken pressure-limiting valve spring, poorly working oil pump, low/high oil viscosity, blocking lubrication oil channel, blocking oil filter core and by-pass valve is difficult to open etc..
  • EASY TO CHECK ENGINE OIL PRESSURE: Remove low oil pressure switch, attach the engine pressure tester with appropriate adapter, start engine to read the pressure on the gauge. Verify vehicle oil pressure is normal or not against manufacturer's recommended readings. Turn off the engine and remove the engine oil pressure tester, replace the low oil pressure switch, then done..
  • FITMENT TYPE: The transmission pressure gauge kit includes 12PCS selectable brass connectors (include the one on hose), very sturdy and durability. These connectors can be connected to the corresponding sizes oil pressure test service port, on most vehicles with gasoline or diesel engine, includes car, motorcycle, ATV, truck and so on..
  • PRESSURE GAUGE AND HOSE: Transmission pressure gauge adopts rubber cover pro....
Check Stock

Shell Rotella T5 Synthetic Blend 15W-40 Diesel Engine Oil (1 Gallon, Single Pack)

  • Synthetic blend 15W-40 diesel engine oil with Triple Protection Plus technology protects against wear, deposits, and oil breakdown.
  • Ideal for on-highway fleets, construction, and agricultural machinery, and diesel pickup trucks — including high-power vehicles that require resistance to heat and stress.
  • Improves low-temperature flow (compared to conventional 15W-40 oils).
  • Helps control engine deposits for reliability at extended oil drain intervals (always follow the OEM recommended oil drain interval).
  • Controls engine wear 37 percent better than the maximum wear requirements in API CK-4 engine wear tests.
Check Stock

Oil Tanker Truck Transport Crash Car Engine Game

  • [Specification] The oil drain plug is made of material of ABS. Its color is yellow and its inner hole diameter is 11mm / 0.43"..
  • [Fitment] Fit for Ford for Mustang GT350, GT350R 5.2L V8 - Gas 2015-2020, for Ford Fusion Sport 2.7L V6 - Gas 2017-2019, for Ford Edge Sport 2.7L V6 - Gas 2015-2018, for Ford F-150 Lariat, XL, XLT 2.7L V6 - Gas 2015-2017, for Ford F-250 Super Duty King Ranch, Lariat, XL, XLT 6.7L V8 - Diesel 2011 2012, for Ford F-350 Super Duty King Ranch, Lariat, XL, XLT 6.7L V8 - Diesel 2011 2012.
  • [Replace Part Number] FT4Z-6730-A BC3Z-6730-A.
  • [Feature] Good tightness, prevent oil leakage problem and effectively solve the problem of oil spill. Oil drain plug directly fits for your car, just replaces your old or broken engine oil drain plug..
  • [Package Include] 5 x Engine Oil Drain Plugs.
Check Stock

JDMON Oil Catch Can Tank Kit with Breather 300ml Aluminum Polish Engine Air Oil Separator Tank Reservoir Kit Universal (Blue)

  • 6061 Aluminum Durable Quality: JDMON oil catch can with breather is made of sturdy T6061 aluminum for enhanced strength and durability,not easy to be damaged and lasted for long time.Note: The hose can’t resist high temperature, you’d better purchase another rubber vacuum hose to meet your demand..
  • Increases Horsepower& Keep Engine Clean: This universal oil catch can catch the oil and moisture in the blow-by gas that causes carbon and sludge build-up in the intake system and the engine. It will prevent the dirt and oil from your intake system into your car engine which can keep the engine clean and preserve engine life..
  • Prevent Oil Leak: JDMON oil catch can kit is built-in o-rings which can prevent oil leak..
  • Easy to Use & Clean: This oil catch can set came with dipstick, measuring fluid level no need to open the can. The material of it is polished, so it’s easy to clean, no need any tools..
  • Package Includes: 1*300ml oil catch can, 1*hose,1*Breather Filter, Necessary Bracket & Screws as picture shows.
Check Stock

90430-12031 Oil Drain Plug Gaskets Qiilu 50pcs Engine Oil Drain Plug Gaskets Crush Washer Oil Drain Plug for Toyota for Lexus Metal Aluminium Alloy OEM Parts Replacement

  • ...pter models are displayed in Specification.
  • Reference OEM---- Replacing OE number: 90430-12031. According to the original factory specifications, which is an ideal OEM replacement with the same form, fit and function as the OEM original part. Comes as 50 pieces, economical and practical.
  • High Quality Material---- The engine oil drain plug gasket is made of high-quality aluminum alloy material, which is wear-resistant and durable, not easy to break and has long service life. The manufacture of the oil drain plug gasket meets the strict quality requirements.
  • Seal Installation---- Seal the oil drain plug on the oil pan to prevent oil leakage, otherwise your engine environment will be damaged. Install this gasket to ensure that the oil drain plug is properly sealed on the oil pan.
  • Practical Accessory---- Ensure that the drain plug is not tightened too tightly and jams, thus damaging the drain plug and the oil pan thread. Proper fit with the drain plug ensures a tight seals. Our crush washer oil drain plugs are snug and flush, providing a tighter and firmer fit than plastic or rubber seals.
Check Stock

Dorman 65396 Oil Drain Plug Pilot Point Molded Gasket M14-1.50, Head Size 28mm Compatible with Select Models

  • [Specification] The oil drain plug is made of material of ABS. Its color is black and its thread diameter is 24mm / 0.94"..
  • [Fitment] Fit for BMW 320i 2013-2015, for BMW 228i 2014-2015, for BMW 528i 2012-2015, for BMW 328i 2012-2016, for BMW X1 2013-2015, for BMW 428i 2014-2015, for BMW Z4 2012-2015 and for BMW 428i Gran Coupe 2015..
  • [Feature] Good tightness, prevent oil leakage problem and effectively solve the problem of oil spill. Oil drain plug directly fits for your car, just replaces your old or broken engine oil drain plug..
  • [Package Include] 1 x Engine Oil Drain Plug.
Check Stock

ValvoMax Stainless Oil Drain Valve - No Tools, No Mess, Fast Drain - for M14-1.50 - Stainless Drain Hose Attachment

  • High-quality Materials: Made of stainless steel, DEEFILL Oil Drain Plug not easy to break and can be used for countless years..
  • Super Magnetic Force: Using high-strength rare earth neodymium magnets with a magnetic force of up to 5000 gauss, which can absorb impurities in the oil effectively, protect your engine from metal fragments, and extend the life of the engine..
  • Easy to install: Included with Annealing Red Copper Crush Washer, it is easy to operate, which can prevent oil leakage and increase engine life effectively..
  • Replacement for: M12 x 1.75 Magnetic Oil Drain Plug replacement for GMC, Chevrolet, Buick, Cadillac, Ford and other brands. Use Amazon fitment drop down to ensure this will work with your vehicle..
  • Package Include: 1 pcs Stainless Steel Magnetic Engine Oil Drain Plug & 1 pcs Annealing Red Copper Crush Washer.
  • Customer Service: We have a professional team to solve all kinds of problems for you. DEEFILL offer you best for your vehicles. 【DEEFILL - WE HOLD IT ALL TOGETHER】.
Check Stock

Dorman 625-209 Engine Oil Cooler Hose Assembly Compatible with Select Cadillac / Chevrolet / GMC Models

  • Ideal replacement - this engine oil cooler hose assembly is a direct replacement for the original hose assembly.
  • Quality materials - this engine oil cooler hose assembly is made from corrosion-resistant materials to ensure the smooth transfer of oil from the engine to the cooler.
  • Easy to install - no special tools required.
  • Quality tested - rigorous quality control ensure this hose assembly conforms to product standards.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

YSTOOL 10L Pneumatic Fluid Extractor Dispenser Set ATF Refill Tool Kit for Changing Oil in Engine Transmission Differential Transfer Case Gear Gearbox Power Steering Coolant with Pump Assembly Tank

  • YSTOOL fluid extractor and dispenser tool kit includes 3PCS 1M dipstick tubes, can insert into engine dipstick tube to extract and refill engine oil or transmission fluid directly, no more need to crawl about under lifted vehicles and avoid mess. Also can insert into any insertable pipe or tank to change non-corrosive and low-consistency liquids (such as differential fluid, transfer case fluid, gear oil, power steering fluid, coolant, water) in vehicle, jet ski, lawn mower or other small engine.
  • This ATF engine oil refill tool set provides 15PCS ATF adapters to fit a variety of vehicle models, add oil from fill plug or help to push transmission fluid into the engine through the drain plug on the transmission pan. All the 15PCS metal adapters are marked with NO. and well packed in a case, compatible with Ford, BMW, Nissan, Honda, Audi, VW DSG, VW CVT, Skoda, Porsche, Benz, Mini Cooper, Kia, Toyota, Hyundai, Infiniti, VOLVO and Lexus. You can find appropriate models by applicable manual.
  • YSTOOL pneumatic oil change tool set allows two-way operation of oil suction and refueling, quick and sparkless. Absorb, transport and distribute liquids under safe and clean conditions. The consistent conversion of the 2-way control valves (blue screw valve and air inle....
Check Stock

Shell Rotella T5 Synthetic Blend 15W-40 Diesel Engine Oil (1 Gallon, Case of 3)

  • Synthetic blend 15W-40 diesel engine oil with Triple Protection Plus technology protects against wear, deposits, and oil breakdown.
  • Ideal for on-highway fleets, construction, and agricultural machinery, and diesel pickup trucks — including high-power vehicles that require resistance to heat and stress.
  • Improves low-temperature flow (compared to conventional 15W-40 oils).
  • Helps control engine deposits for reliability at extended oil drain intervals (always follow the OEM recommended oil drain interval).
  • Controls engine wear 37 percent better than the maximum wear requirements in API CK-4 engine wear tests.
  • Improved oxidation performance for increased resistance to oil breakdown under high temperatures compared to the previous formulation.
  • Case of three 1-gallon bottles with ergonomic design for easy handling and pouring.
Check Stock

M14 x 1.5MM Stainless Steel Magnetic Oil Drain Plug with Neodymium Magnet Fits for Honda Acura Ford GM Mazda Hyundai KIA And More Vehicles

  • 【Function】The Purpose of Designing a Magnetic Oil Drain Plug is Simply to Ensure a Better Engine Performance by Keeping The Metal Debris Away and Keep The Engine Oil Stored to Increase The Engine Life..
  • 【Compatible】Sized around M14x1.5, This Engine and Transmission Oil Pan Plug Is Compatible with Almost Any Vehicle Having The Same Size Thread. Great Replacement for Car, Boat, Motorcycle and Other. It Goes Best with Most of the Models of Kia, Ford, GM, Hyundai Acura and Other.Please Check Your Thread Pitch Before Purchase..
  • 【Easy Installation】M14 x 1.5 stainless steel oil drain plug It is recommended that you wipe the debris off the magnet every time you change the oil..
  • 【Premium Quality】Made of High Quality Material. Tested & Certified to Meet or Exceed OEM Quality Standards..
  • 【12-Month Warranty】The Stainless Steel Magnetic Oil Drain Plug come with 12 Months Warranty. Hassle-free Return and Refund Policy. Please Buy it with Your Confidence..
Check Stock