Top Engine Oil Pan

Oil Pan Gasket Set - Compatible with 4.8L 5.3L 6.0L 6.2L Chevy Silverado Suburban Tahoe Trailblazer GMC Sierra Yukon Cadillac Escalade - Replace 12612350 OS30693R

  • REPLACeMENT OIL PAN GASKET - A primary gasket that keeps oil from leaking out of your engine. If you notice symptoms like smoking issues, engine....
  • FIT THE FOLLOWING VEHICLES - Oil pan gasket compatible with 4.8L 5.3L 5.7L 6.0L 6.2L GM Vortec engine, including Chevrolet Silverado, Suburban, Tahoe,....
  • REPLACE PART NUMBER - Replace GM 12633904, replace VS 50504 R-1 VS50504R1. Commonly found on Chevrolet Silverado, Suburban, Tahoe, Avalanche,....
  • OEM DESIGN & DIRECT FIT - Quality materials & advanced technology used, meets or exceeds OEM standards. Even though this is not a genuine GM or....
  • WHAT YOU'LL GET - 1 Set of Oil Pan Gasket & 12 Months Warranty. If you have any problem with our oil pan gasket, feel free to contact us, we will sort....
Check Stock

Racing Power Company R9729 Orange Drag Race Oil Pan for Big Block Chevy

  • Brand New Weiand Oil Pan Kit, 7 Quarts, Gold Zinc Finish, Fits 1986-2002 Small Block Chevy Drag Racing Engines (Holley Part #5003WND).
  • Fits: 1986-2002 Small Block Chevy Drag Racing Engines | Includes: Application specific oil pan | Oil pan gasket | Oil pump pickup | Pan mounting bolt kit.
  • Features: Trap door baffles keep oil under control during hard acceleration | Increased oil capacity to keep high performance engine oil systems fed properly | Kit includes Pan, Pump Pickup, Pan Gasket, and pan mounting bolt kit.
  • Specs: Application: 1986-2002 Small Block Chevy | Brand: Weiand | Crank Scraper Included: No | Dipstick Location: Passenger | Emission Code: 5 | Finish: Gold Zinc | Material: Stamped Steel | Oil Pan Capacity: 7 Quarts | Oil Pan Depth: 8.125" | Oil Pan Type: Fabricated | Product Type: Oil Pan Kit | Sump Location: Rear | Windage Tray Included: No.
  • NOTE: Kit designed to work with standard volume oil pumps..
Check Stock

2-Pack Silicone Car Heater Pad Engine Oil Heater Pad - 4' x 5' Self-Adhesive Oil Pan Heater Pad Battery Heater Pad Engine Block Heater Pad with Thermal Protector 68' Long Power Cord 150W 120V

  • In the cold winter, use these two engine heater pads before starting the car to bring the oil to the right temperature and thus reduce oil consistency, which will lubricate the engine better and reduce its wear..
  • Peel off the paper backing from the oil pan heater pad and stick the pad to a clean metal surface, then plug the power cord into the outlet. Once attached, the pad will be less likely to be removed..
  • Composed of hard-wearing silicone, these two engine block heater pads are absolutely waterproof, oil-proof, low-temperature resistant and durable enough to serve you for a long time..
  • These 150W/120V oil pan heater pads have a built-in automatic thermal protector that keeps the heating temperature at a constant 90°C, effectively preventing safety hazards caused by high temperatures..
  • 【Warm Tips】 Our engine heater pads are only suitable for automotive parts with metal surfaces, such as oil pan, reservoir and transmission pan. Because of the importance of safety and product life, we do not recommend other uses..
Check Stock

NEW WEIAND OIL PAN KIT,7 QUARTS,GOLD ZINC,8.25" DEPTH,DRAG RACING,COMPATIBLE WITH 1958-1979 SMALL BLOCK CHEV.

  • Brand New Weiand Drag Racing Oil Pan Kit, 7 Quarts, Gold Zinc Finish, Fits 1958-1979 Small Block Chevy Engines, Produced By Holley (Holley Part #5001WND).
  • Fits: 1958-1979 Small Block Chevy | Includes: Application specific oil pan | Oil pan gasket | Oil pump pickup | Pan mounting bolt kit.
  • Features: Trap door baffles keep oil under control during hard acceleration | Increased oil capacity to keep high performance engine oil systems fed properly.
  • Specs: Application: 1958-1979 Small Block Chevy | Brand: Weiand | Crank Scraper Included: No | Dipstick Location: Driver | Emission Code: 5 | Finish: Gold Zinc | Material: Stamped Steel | Oil Pan Capacity: 7 Quarts | Oil Pan Depth: 8.25" | Oil Pan Type: Fabricated | Product Type: Oil Pan Kit | Sump Location: Rear | Windage Tray Included: No.
  • NOTE: Kit designed to work with standard volume oil pumps..
Check Stock

Silicone Heating Pad, 2 x 5inch Car Universal Oil Pan Heater 50W Battery Heater Pad 120V Engine Block Heater Pad with 68Inch Long Power Cord

  • Heating Technique: In the cold winter, use our 120V 50W silicone heating pad to turn on the power before starting the engine, and continue to evenly heat the metal surface to make the oil reach the perfect temperature.
  • Improve Engine Oil Flow: Continue to transfer heat to reduce the consistency of the oil, keep the engine oil as a thin liquid, help you better lubricate the engine, reduce wear, and extend the service life of the engine and gearbox.
  • High-Quality Material: Our oil pan heater is made of wear-resistant silicone, waterproof, oil-proof, and low-temperature resistant, the entire surface is heated evenly, strong adhesive makes it fixed on the metal surface. Please note: it is very hot after heating, please use a thermostat (not included) to adjust the temperature.
  • Simple Operation: Clean the metal surface, tear off the backing of the engine heating pad and stick it firmly to the outside of the oil pan or other metal surface, insert the 2-core power cord into the socket, and the heating starts immediately, after 10-15 minutes, unplug the power cord and start the vehicle to resume normal operation.
  • Adaptability: The size of the engine block heater is 2 in x 5 in, and the power cord is about 68 inches. It is only suitable for automotive parts with m....
Check Stock

Lisle 38780 22' Square No-Splatter Pad

  • 22” Square Pad Protects Floors & Work Area from Messy Oil Splatter..
  • Insert 22" square pad in transmission drain funnels or larger oil drain pans, before oil change to eliminate oil splatter..
  • Porous material allows fluid to quickly pass through into funnel or pan..
  • Pad material resists engine oil, transmission fluid, coolant, brake fluid, brake cleaner, gear oil and other solvents..
  • Pad material resists engine oil, transmission fluid, coolant, brake fluid, brake cleaner, gear oil and other solvents.Pad material resists engine oil, transmission fluid, coolant, brake fluid, brake cleaner, gear oil and other solvents..
  • Important: Not for coolants or fluids that will be recycled in the vehicle. Material fibers may contaminate the fluid..
Check Stock

TCT-MT ABS Oil Drain Pan w/Spout Low Profile Fit for Harley Davidson Models 1984-2020 Road Glide FLTRX, Road King FLHR, Iron 883 XL883N, Heritage Classic FLHC, CVO Tri Glide FLHTCUTGSE

  • 【FITMENTS】Fit for Harley Davidson Models 1984-2020. Please check the description for FITMENT details!.
  • 【FEATURES】This oil drain pan is ideal for home garage use or professional auto shop use. The oil drain pan's capacity allows user to drain multiple engines before having to empty for recycling or waste. Low profile design for easy maneuverability..
  • 【FEATURES】Reduce the mess and cleanup required when changing the fluids on your motorcycle.
  • This reusable Drain Pan is designed specifically for use with low vehicles.
  • Low-profile design fits easily under standard height and lowered motorcycles, and slips beneath the bike even when on the side stand..
  • 【FEATURES】Will capture two engine oil changes or the complete drain fluids (engine oil, primary and transmission) from one motorcycle.
  • Large enough to catch the oil from the entire length of the primary, and is sized to hold and drain an inverted primary cover.
  • Convenient carrying handle simplifies transport..
  • 【PACKAGE INCLUDED】1x Oil Drain Pan. *Material: ABS.
Check Stock

Genuine OEM Toyota Oil Filter 90915-YZZD3 (4PK) with DIINGO Plug Oil Drain Gasket 90430-12031 (4PK) Fit for 4Runner FJ Cruiser Land Cruiser Sequoia Tacoma Tundra

  • The Pressure Release Valve: Oil filters clog when exposed to excess contaminants. This clogging can restrict the flow of oil to the engine causing severe damage. The Pressure Relief Valve of a Genuine Toyota Oil Filter opens only when the filter is clogged allowing oil to flow to the engine. The valve on some non-genuine Toyota oil filters open at lower pressures, allowing unfiltered oil to the engine even when the filter is not clogged..
  • The Filter Element: The Toyota approved element effectively filters contaminants while meeting all Toyota Parts specifications for oil flow. By comparison, a lesser quality element may clog over time, which could lead to engine seizure or other potential engine problems. Some non-genuine Toyota oil filters do not meet Toyota’s stringent specifications..
  • The Anti-Drainback Valve: Genuine Toyota Oil Filters feature an Anti-Drainback Valve that prevents oil from draining out of the engine and into the oil pan. This helps protect your engine from increased wear during cold-starts..
Check Stock

Silicone Oil Pan Heater Pad 4x5', Self-Adhesive Engine Block Heater Pad- 150W 120V, Transmission Fluid Reservoir and Hydraulic Fluid Heater Pad with Thermal Protector 68' Long Power Cord

  • [PREVENT ENGINE WEAR ON COLD WINTER STARTS]- When your car driving in a low temperature environment, it is difficult to start. Using the 120V /150W Silicone Heater Pad, Oil Pan Heater Pad can throw off a lot of heat and Warm up Quick to 194 degrees Fahrenheit (90 C) and easy to start by improving the flow of fluids in cold winter, which can limit cold startup motor bearing and ring wear ..
  • [PREMIUM MATERIAL]- 150W/120V Silicone Electric Heating Pads made of hard-wearing silicone, Car Battery Heater Pad has the functions of fast heat generation, good thermal efficiency, pressure resistance, abrasion resistance, and water resistance, which has a long useful life. You can rest assured to buy Heating Pad in this cold winter..
  • [GOOD ADHESION AND EASY TO INSTALL]- Installation is simple with the self -adhesive. Clean the surface of the oil pan thoroughly and keep the power cord away from any hot exhaust surfaces or moving parts. Tear off the 4 x 5”(10.2cm x 12.7cm) paper back of the Car Engine heating pad, stick the pad to a clean surface, Sticks amazingly well. and then plug the power cord into the socket..
  • [SAFETY WARMING]- There is an automatic thermal protector inside the Oil Pan Heater Pad, which keeps engine block heater pad’s temperature at a cer....
Check Stock

90430-12031 Oil Drain Plug Gaskets Qiilu 50pcs Engine Oil Drain Plug Gaskets Crush Washer Oil Drain Plug for Toyota for Lexus Metal Aluminium Alloy OEM Parts Replacement

  • ...pter models are displayed in Specification.
  • Reference OEM---- Replacing OE number: 90430-12031. According to the original factory specifications, which is an ideal OEM replacement with the same form, fit and function as the OEM original part. Comes as 50 pieces, economical and practical.
  • High Quality Material---- The engine oil drain plug gasket is made of high-quality aluminum alloy material, which is wear-resistant and durable, not easy to break and has long service life. The manufacture of the oil drain plug gasket meets the strict quality requirements.
  • Seal Installation---- Seal the oil drain plug on the oil pan to prevent oil leakage, otherwise your engine environment will be damaged. Install this gasket to ensure that the oil drain plug is properly sealed on the oil pan.
  • Practical Accessory---- Ensure that the drain plug is not tightened too tightly and jams, thus damaging the drain plug and the oil pan thread. Proper fit with the drain plug ensures a tight seals. Our crush washer oil drain plugs are snug and flush, providing a tighter and firmer fit than plastic or rubber seals.
Check Stock

Mamiko 04152-YZZA1 Oil Filter Kit (3Pcs) and 90430-12031 Oil Drain Plug Gaskets (10 Pcs) Compatible with Toyota Avalon Camry RAV4 Sienna Lexus ES300h ES350 IS200t RX350 RX450h Replacement

  • The Pressure Release Valve: Oil filters clog when exposed to excess contaminants. This clogging can restrict the flow of oil to the engine causing severe damage. The Pressure Relief Valve of a Genuine Toyota Oil Filter opens only when the filter is clogged allowing oil to flow to the engine. The valve on some non-genuine Toyota oil filters open at lower pressures, allowing unfiltered oil to the engine even when the filter is not clogged..
  • The Filter Element: The Toyota approved element effectively filters contaminants while meeting all Toyota Parts specifications for oil flow. By comparison, a lesser quality element may clog over time, which could lead to engine seizure or other potential engine problems. Some non-genuine Toyota oil filters do not meet Toyota’s stringent specifications..
  • The Anti-Drainback Valve: Genuine Toyota Oil Filters feature an Anti-Drainback Valve that prevents oil from draining out of the engine and into the oil pan. This helps protect your engine from increased wear during cold-starts..
Check Stock

Dorman 090-038CD Oil Drain Plug Standard M12-1.25, Head Size 14Mm Compatible with Select Models

  • Important function: The important function of the magnetic drain plug is to attract and help remove the fine metal particles in the crankcase oil, allowing the oil to flow through the engine more easily. High-performance racing cars and street engines rely on these as additional safeguards..
  • Strong protection: The high-strength magnet of the drain valve plug prevents harmful metal scraps from entering the engine. These plugs have a very powerful magnet that can help collect these debris directly from the oil during operation..
  • Engine and oil pan protection: The sealing and anti-vibration mechanism of the engine drain plug can reduce the risk of engine damage due to catastrophic oil loss due to the loss of the drain plug..
  • Easy to install: Our oil drain plug requires no installation tools and can be installed in a few seconds. Before installation, please put the gasket in the groove to prevent the drain pipe from loosening..
  • Applicable models: The replacement of the oil drain plug is perfectly suitable for Ford F150 Raptor, and for Ford Mustang 2015-2019, 14*1.5 models..
Check Stock