Top Engine Oil Pressure Monitoring System

YSTOOL Oil Pressure Tester Kit Professional Oil Pressure Gauge Tool for Engine Diagnostic Test with Hose Adapters and Carry Case for Cars ATVs Trucks Use 0-140psi

  • The engine oil pressure tester kit is used to diagnose and test the engine oil pressure value, to check whether it is normal. Prevent engine failure due to lack of oil. And with this best in class tools, you can get a definite pressure value well without relying on the dashboard light..
  • There are 10 types of thread adapters are suitable for most cars, motorcycles, boats and other vehicles with gasoline and small diesel engines. As long as the adapters can match with your engine and oil pressure does not exceed 140 PSI. The 10 adapters are marked with number, you can choose the right one very easy..
  • The pressure gauge uses metal gauge head with shockproof rubber cover, 3" big dial with clear dual scale range 0 to 140 PSI and 0 to 10 Bar. Compare to a large range, this oil pressure gauge is easy to read about 1-2 Bar with a short range. There are a straight quick coupler and a elbow one in the case, you can choose it according to the location of the engine oil pressure test port..
  • Steel adapters, brass quick couplers, are featured with high hardness, rustless, durable and good air sealing. The 4FT long hose is made of rubber nylon resin with MAX. working pressure 300 PSI. There are also a small bag of seal gaskets, which are used for replacing the ones on....
Check Stock

JoyFans Oil Pressure Tester Tool, 0-140PSI Oil Pressure Gauge Kit for Fuel System Mechanical Sensor Engine Cylinder Compression Test with Hose Adapters for Cars ATVs Trucks Use Red Case

  • Fuel Injector Pump Pressure Check: Engine oil pressure test tool kit is designed to test oil pump pressure and check operation of fuel system components. Compare the measured pressure value to the standard reference range from manufacturer, we can take quick and accurate diagnosis and feasible solution on the oil pipeline leakage and engine wear, so as to confirm if the oil pressure gauge has been damaged. No more reliance on the dashboard light..
  • Oil Pressure Tester: The petrol engine cylinder tester kit has a shockproof rubber casing and a large clear dial with readings from 0~140 psi and 0~10 bar for easy and accurate work on both American and metric systems. Keeping the gauge safe from bumps and drops. Built-in hose assembly also comes with a side pressure relief button for instant pressure reset and no repeated hose disconnect, and 4 ft long flexible hose with convenient quick coupler for simple adapter installation and removal..
  • Durable Construction: 11-piece metal adapters are all made with heavy-duty forged steel and brass hardened for maximum strength and longevity.
  • designed to withstand extreme pressure in any situation for professional use. Each thread adapter marked with number, features black oxide finish to resist rust and corrosion.
Check Stock

KIMISS Towing Hitch Engine Oil Coolers & Kits, Motorcycle Engine Oil Cooler Oil Cooling Radiator Kit for Honda CB CG 100CC-250CC(85ML-Silver)

  • 【Required accessories】Whether you're using a top-down corner engraving or pulling down a tow, your high speed requires a reliable and efficient cooling system..
  • 【Minimal pressure loss】With minimal pressure loss, the kit uses a large oil drain cooler mounted in the front grille for optimum airflow and cooling..
  • 【Funtion】Cooling the engine temperature keeps the engine within normal operating temperature range, reducing engine load and extending its life..
  • 【Two choices】Invisible black and stylish silver cooler options include pre-assembled stainless steel cords and special mounting brackets for a painless, clean installation..
  • 【Fitment】Motorcycle Oil Cooler System Kit, Fit for Honda GY6 100CC-150CC Engine. Transmission Cooler Mounting Kit Oil Cooler Lines.
Check Stock

HOTSYSTEM 7 Color Oil Pressure Gauge Kit 0 to 100 PSI Pointer & LED Digital Readouts 2-1/16 52mm Black Dial for Car Truck

  • 2 1/16 Inches (52mm) black face gauge, One Year Limited Warranty..
  • Oil Pressure Gauge Monitoring car's oil pressure from 0 to 100 PSI,ensuring your bearings, crankshaft, and other vital engine parts remain properly....
  • Display Feature: An pointer gauge with an illuminated red needle and blue LED display,7 Solid Color Settings for easier night driving..
  • Easy Installation: Comes with oil pressure sensor with 1/8th NPT threads, 1.94ft power wire and instruction manual,all of which make the install....
  • Note: They are only accurate at sea level. IF you have any product or installation issue,please contact us, we will offer a good solution within....
Check Stock

YSTOOL 10L Pneumatic Fluid Extractor Dispenser Set ATF Refill Tool Kit for Changing Oil in Engine Transmission Differential Transfer Case Gear Gearbox Power Steering Coolant with Pump Assembly Tank

  • Pump assembly incorporates the container cover, the handle trigger with lock, 2-way control valves for conversing evacuate and dispense, safety valve for automatically releasing excessed pressure (above 43psi /3bar), 1/4" American style air inlet plug, pressure gauge (0-80psi/0-6bar) for monitoring the pressure change, quick coupler for connecting main hose. 10L big capacity well constructed container, is marked with accurate scale to help observe the amount of liquid. Stable base avoids dumping.
  • The main hose is 80" long, with a quick plug on one side to connect the container, and a quick coupler on the other side to connect the dipstick tubes or ATF adapters. There is a ball valve on the quick coupler to control the fluid flow, very convenient. Please note, there is no instruction in the kit, please refer to your vehicle operation instruction and following product description to operate. Your satisfaction and recognition are always what we pursue, please contact us to resolve any issue.
Check Stock

2400-2800PSI Pressure Washer Replacement Pump, 3/4\ Shaft Horizontal Pressure Pump Replacement Power Washer Pump Universal Pumps for Power Washer

  • ✔[RESTART YOUR PRESSURE WASHER]: Vertical Pressure Washer Pump 7/8" Shaft MAX 3100 PSI / 2.5 GPM / @3400 RPM, refurbish your pressure cleaner by replacing it with a new pump for up to 150 hours. Top performance at 2800-3000 PSI and replacement for most Rear Outlet 180-196cc at 6.5-7hp engine RYOBI, Honda, Briggs and Stratton, Subaru, PowerStroke, Craftsman, Simpson, Homelite and Many other brand..
  • ✔[EXTENDED SERVICE TIME]: High-performance double seal system prevents leakage, upgraded technical surfacing piston and bearing, We promise the pump get 200 hrs running time, longer than OEM power washer pump. And the thermal relief valve (TRV) protects the pump from overheating while in by pass mode. ⚠ But will not fit 3/4" shaft engine pressure washer. If you're not sure, please keep intouch with us!.
  • ✔[EASY JOB]: Built-in for simple & quick cold starts to make the startup a breeze. no need to release pressure before starting engine. Easy set up in 5-10 minutes with Key. At the same time, we come with 3 special test matched nozzles(0°/25°/soap) to help you get the best cleaning solution. Please follow the instructions to help your machine renew working quickly..
  • ✔[NO MAINTENANCE ]: Our pressure washer pump already have pre-filled oil and dou....
Check Stock

DLE Engines 30-C28#3 DLE30 Electronic Ignition

  • 【PROFESSIONAL DIESEL ENGINE】4-stroke Air- Cooled Diesel Engine.Through advanced software analysis and optimization design, the reliability of....
  • 【DIESEL ENGINE SPECIFICATIONS】Model：186F Туре：Single-cylinder, vertical, 4-stroke air- cooled diesel engine Combustion system：Direct....
  • 【DIESEL ENGINE PARAMETER】Oil System: Pressure and Splash Engine Cooling Type: Forced Air Cooling.
  • 【SHAFT PARAMETER 】 Shaft Type: Keyed - Straight Shaft Diameter: 1" Diameter, 1/4" Keyway Shaft Length: 72.2mm (2-5/6" Length) Shaft I.D. Thread....
  • 【WIDE APPLICATION】It is widely used in small agricultural machinery, such as micro-tiller, pastoral management machine, irrigation and drainage....
Check Stock

XTRONS Car Auto USB TPMS Tire Pressure Monitoring Alarm System Android Car Stereo GPS Player

  • 【Tire Pressure Monitoring System】Tire Leaking Alert, High / Low Pressure Alert, High Temperature Alert. (Note: This TPMS unit will work with vehicles up to a max weight of 3.5 ton).
  • 【Prevent accident】TPMS07 could monitor the air-leakage timely, keep driving under standard tire pressure, prevent flat and alarm in advance, efficiently avoid the traffic accident and improve the safety driving..
  • 【Extend tire life】Improve car load capacity, also extend the life of engine chassis, suspension system, and tires..
  • 【Balance the tire pressure】TPMS07 could balance the tire pressure, easy for driver to control, reduce the brake stopping distance, and improve the car whole life and comfort..
  • 【Save fuel】After you install TPMS07 in your car, it could guarantee tires in normal tire pressure. It is helpful in reducing tire resistance and wearing, saving fuel, and driving car more economically..
Check Stock

Vintage Rat Rod Pickup Truck Hot Rod T-Shirt

  • 【PROFESSIONAL DIESEL ENGINE】4-stroke Air- Cooled Diesel Engine.Through advanced software analysis and optimization design, the reliability of diesel engine in structure and cooling is ensured. Optimize fuel system and intake and exhaust system to save energy and fuel..
  • 【DIESEL ENGINE SPECIFICATIONS】Model：186F Туре：Single-cylinder, vertical, 4-stroke air- cooled diesel engine Combustion system：Direct injection Bore*stroke(mm)：86x70mm Displacement capacity(cc)： 406cc.
  • 【DIESEL ENGINE PARAMETER】Oil System: Pressure and Splash Engine Cooling Type: Forced Air Cooling.
  • 【SHAFT PARAMETER 】 Shaft Type: Keyed - Straight Shaft Diameter: 1" Diameter, 1/4" Keyway Shaft Length: 72.2mm (2-5/6" Length) Shaft I.D. Thread Size: 7/16-20UFN-2B, 20mm depth.
  • 【WIDE APPLICATION】It is widely used in small agricultural machinery, such as micro-tiller, pastoral management machine, irrigation and drainage machine, generator set, small transport vehicle, small walking tractor and other fields..
Check Stock

CGOLDENWALL 1500W Commercial Oil Press Machine Oil Extractor Expeller with Intelligent Temperature Controller / Industrial Motor / All Stainless Steel / CE (110V, US Plug)

  • ... Besides, the equipped stainless steel high-speed plasma pressing rod highly promotes oil yield..
  • [INTELLIGENT TEMPERATURE CONTROL] With the combination of the intelligent temperature controller and the machine's heating device, the oil presser can achieve a real-time monitoring and adjustment of the temperature. Temperature Setting: 100-300℃.
  • [DOUBLE BOTTOM COOLING SYSTEM] In addition to the cooling system that comes with the engine itself, the lower part of the machine is also equipped with a forced air cooling system: a dual cooling system that can run continuously in the summer..
  • [SQUEEZABLE MATERIAL]- Varieties of materials including Coconut, Sunflower Seed, Walnut, Okra, Soybean, peanut, Moringa Seed, Kiwi Seed, Winged Oil Fruit, Perilla Seed, Shelled Hemp Seed, Flax Seed, Camellia Seed, Rapeseed, Black Sesame, White Sesame, Almond Powder, Pepper Seeds, Pumpkin Seeds, Pine Nuts, Licorice, etc. The machine can squeeze olive oil, but for household press, it is difficult to complete, so we feel sorry that pressing olive oil is not recommended..
Check Stock

6.0 Injector Pressure Regulator IPR Valve Socket & Air Test Fitting Tool Kit & Fuel Rail Adapters for 2003-2010 Ford 6.0L for Powerstroke E-350/ E-450, Excursion, F-250/F-350/F-450/F-550

  • Fitment -- Fit for 2003 - 2010 Ford Super Duty F250 F350 F450 F550.
  • 2003-2010 Ford Excursion, 2004-2010 Ford E-350 E-450 with 6.0L V8 diesel turbocharged engines..
  • IPR Valve Socket -- Replace the worn out injector pressure regulator (IPR) valve, designed to remove/replace your injector pressure regulator (IPR) effectively and quickly!.
  • IPR Valve Air Test Fitting Tool -- Used to quickly verify that an engine has no high pressure oil leaks before installing the engine into the vehicle where repairs are much more difficult..
  • Fuel Rail Adapters -- High Quality CNC Machined from Billet Brass, allows observation of the High Pressure Oil System's Injector Control Pressure (ICP) by direct gauge connection, and facilitates testing of the High Pressure Oil System for leaks using shop air..
  • 100% Satisfaction Guarantee -- If you're not 100% satisfied with our Kits, simply return it for a full refund in 30 days, Premium Support & 12 Months Warranty..
Check Stock

Fuel Injector Cleaner Tool Car Fuel System Cleaner Kit Portable Non-Dismantle Cleaning Tools Fuel Injector Tester 600ML 140PSI Injector Cleaning Machine(Without Liquid)

  • 【Multifunctional Fuel Injection Cleaner Tool】 This injector cleaner tool can clean the entire fuel system, including the throttle valve, fuel nozzle and combustion chamber. At the same time, it also has a high and low pressure cleaning function to help you better complete the fuel system cleaning job..
  • 【Disassembly-Free & Dual-System Fuel System Cleaner Kit】The fuel system cleaner kit is used to clean the fuel injector, intake system and three-way catalytic converter. It can clean the car without disassembly. And it has two electronic fuel injection systems. One engine has an oil return pipe, and the other engine does not have an oil return pipe (Quick-connect anti-corrosion, anti-friction joints and anti-friction pipes for all cleaning fluids.).
  • 【Adjustment of Throttle Mode of Fuel Injector Cleaning Kit】The connection method is the same, just adjust the air source pressure to 1-5PSI. How to identify the inlet and return hoses: ①Generally speaking, the larger the inlet pipe, the smaller the return pipe.
  • ②There is always a filter interface on the side of the inlet hose and a buffer interface on the return side.
  • ③There is an arrow on the hose Indicate the fuel flow direction..
  • 【Widely Applicable Engine Cleaning Tools】 This injector c....
Check Stock