Top Engine Oil Pump Inlet Tube

LUMAX LX-1336 Red Plastic Bucket Pump with Flex Hose and Non-Drip Nozzle. 5-6.5 Gallon (20-25 L) Capacity. Self-Priming, Push-Down Action Pump. Discharge Capacity: 3 Fluid Ounces per Stroke.

  • Push-down action pump that fits 5 gallon pails.
  • Precision buna-n seal that eliminates by-pass.
  • 50 inches flex hose has non-drip nouncezle.
  • 3 fluid ounce per strokeDescriptionThe plastic bucket pump with flex hose and non-drip nozzle is a plastic bucket pump with zinc-plated steel tube for transferring non-corrosive fluids of light to medium viscosity like, engine oil, gear oils, transmission fluid, automotive additives, machine oil, etc. It is a self priming, push-down action pump that fits 5 gallon pails, has a drain-back nozzle that prevents spills and accidents, a precision buna-n seal that eliminates by-pass, a nylon piston for durability, and a zinc plated, corrosion-resistant suction tube. It includes a 50 inches oil-resistant flex hose with non-drip nozzle, has a 1 inches inlet port, and a 1/4 inches outlet port. The discharge capacity is 3 ounce per stroke..
Check Stock

Upgraded 80W Oil Change Pump Extractor SICOTOOL 12v Diesel Fluid Scavenge Suction Oil Transfer Pump with Hose for Car Boat Motorbike Truck ATV and Other Vehicles.

  • 【Portable 80w Oil Extractor Pump】: Lightweight and portable oil pumps bring a lot of convenience for you. Ideal oil pump for oil change.12V 80W....
  • 【Built in Over Current Protection】：Our this upgraded pump built-in overcurrent protection mode ,which can help to maintain the stable operation....
  • 【Easy to use】: Install the oil extractor inlet and outlet hose, tighten the hose clamps, connect the power clamps to the vehicles battery and....
  • 【Safe Operation】:To pump oil properly, before use,please heat up car engine to 104°F-140 °F (40℃-60℃) about 15 minutes in order to prevent....
  • 【What you get】:Package included: 1 x Pump.
  • 2 x Battery Clamps. Service warranty: 12month....
Check Stock

LUMAX Black LX-1300 Lever Bucket 5 Gallon Pails. Smooth, Easy Pumping Action dispenses All Types of Lubricants, Even in The Coldest Weather

  • Portable - clamps to any 25-50 pounds/ 5 gallon pail.
  • All steel pump has 1-1/2 inches inlet and 1/2 inches outlet port.
  • Zinc plated corrosion-resistant suction tube.
  • Self-priming delivers 1 quart per 12 strokes.
  • 5 feet oil resistant flex hose with curved nouncezleDescriptionThe lever-action bucket pump uses smooth, easy pumping action and dispenses all types of lubricants, even in the coldest weather. It is ideal for transferring motor oil, transmission fluid, differential fluid, heavier oils and other automotive additives. Rust resistant ribbed cover assembly firmly clamps to any 25-50 pounds / 5 gallon pail using adjusting screws to accommodate variations in drum diameter. This all steel pump has an 18 inches x 1-1/2 inches zinc plated, corrosion-resistant suction tube with a 1-1/2 inches inlet and a 1/2 inches outlet port and a 5 feet oil resistant flex hose with curved nozzle. The head of the pump is made of heavy-duty, lucast, cast-alloy material which is heavier and has a reinforced wall thickness for extra strength and durability. This pump is self-priming , delivers 1 quart per 12 strokes, and has a pump lever with an oil resistant, contoured grip for comfort and safety..
Check Stock

YaeTek Oil Change Pump Extractor, 12v 60w Marine Oil Change Pump Electric Oil Pump, Diesel/Engine Oil Scavenge Pump for Oil Changes in Car, Boat, Truck, Motorcycle

  • ...p has 1 outlet hose, 1 inlet hose, 2 hose locks and 2 battery clips. Please pay attention to the direction of import and export, positive and negative poles and lock hose lock before use. The suction power of the micro suction pump is limited. Please do not connect other extension tubes..
  • 【Do not pump】Except for engine oil and diesel,do not pump hot oil or when the car engine is running.Car engine must cool complately.Do not pump gas,paraffim,petrol or other inflammable liquids.Do not pump water and it is not suitable for storage or transportation of fuel or other liquids.Do not pump different oils into the same tank. Only pump warm motor-oil(40℃-50℃) do not pump off motor-oil, as long as the motor is running..
Check Stock

OKOOLCAMP Oil Change Pump Extractor -12V 60W Marine Oil Extractor Pump for Boat Truck RV ATV Diesel Scavenge Suction Pump 60W

  • Quick and Efficient- Oil Extractor Pump, a good helper for quick and clean oil changing. Diesel Flow Rate: 1.5L/min, Engine Oil Flow Rate(40-60℃):....
  • Premium Quality-Pure copper motor and conductive clips, with good electrical conductivity, corrosion resistance and rust resistance. Fully enclosed....
  • Easy to Use-Install the oil transfer pump inlet and outlet hoses, tighten the hose clamps, connect the power clamps to the vehicle battery and turn on....
  • Operation Tips-Except ENGINE OIL/DIESEL/BIODIESEL, this oil extractor CAN NOT extract WATER, GASOLINE, PETROL, FUEL or FLAMMABLE LIQUID. Before use,....
  • Widely application-This professional oil suction pump is lightweight, portable and easy to operate, it provides quick and clean oil changes, saving....
Check Stock

Upgrade Oil Change Pump Extractor, 12V 60W Motor Oil Diesel Fluid Transfer Pump Quick Oil Extractor Pump Scavenge Suction for Car Boat Motorbike Tractor Truck RV ATV

  • HIGH EFFICIENT: This oil transfer pump is an ideal equipment for quick easy and clean safety oil-changes. Flow Rate: 3L/min flow rate for engine oil, 4L/min for diesel. Voltage: 12V, maximum current: 5A, maximum power: 60W..
  • APPLICATION: This oil pump can change engine oil and diesel for cars, tractor, boat, motorbike, truck, RV and ATV and other 12V vehicles..
  • EASY INSTALLATION: You just need to place the inlet/outlet hoses at the appropriate positions, tighten the hose clamps, connect the power clamps anode and cathode to the car battery properly and press the button. Oil will be extracted by itself..
  • NOTE: To pump oil properly, please start the vehicle to heat up the oil (to 40~60 degrees)about 15 minutes. Otherwise, the oil change pump may have low suction or jammed..
  • WARNING: This oil pump is not use to extract water, gearbox-oil(too viscous) or flammable liquids (fuel, petrol etc)..
Check Stock

PLUMIA 12V 100W Oil Change Pump Extractor, Upgraded Oil/Diesel Fluid Pump Extractor Scavenge Suction Transfer Pump, Marine Electric Oil Pump, For Boat, Car, Motorcycle, ATV, RV, Truck, Motorbike

  • ...l pumps are needed by everyone, simple operation does not need to spend too much time to practice, widely used in motorcycles, Car, scooters, Boat, quad bikes, trucks, Ship, forklifts, Marine, Power generation machinery, tractors, lawn mowers and various machinery to change the oil..
  • 【SAFE OPERATION】- Except for engine oil and diesel, the oil pump must not draw any flammable liquid or water to avoid accidents. Before use, be sure to heat the car engine to 104 ° F-140 ° F, Avoid clogging the oil pump due to oil solidification..
  • 【ENGINE OIL CHANGE MADE EASY】 - DC 12V 100W has enough power, you only need to clamp the conductive clip on the motor and open the switch to start it, so that you can complete the oil pumping work smoothly and effectively, replacing the traditional oil change method and reduce tedious workload (diesel flow: 1.7L / m, oil flow 0.35L / m)..
  • 【ACCESSORIES & PRECAUTIONS】- The oil pump has 2*outlet hose, 2*inlet hose, 4*hose locks,1*screwdriver, 1*Oil-proof gloves, 2*battery clips, 1*user's manual. Please pay attention to the direction of import and export, positive and negative poles and lock hose lock before use. The suction power of the micro suction pump is limited. Please do not connect other extension tubes..
Check Stock

Lotyes Quick Oil Change Pump, DC 12V 60W Oil Diesel Fluid Pump Extractor Transfer Pump & Tubes Kit for Car, Boat, Motorbike, Truck, RV, ATV and Other Vehicles

  • ...s needed, the hoses and hose clamps in the package can prevent leakage during the extraction process..
  • Easy installation: Install the oil extractor inlet and outlet hose, tighten the hose clamps, connect the power clamps to the vehicles battery and switch the button on..
  • Versatility: This oil transfer pump can change engine oil and diesel for cars, boat, motorbike, truck, RV and ATV and Other Vehicles. WARNING: THIS PRODUCT CAN NOT USE TO EXTRACT WATER, GEARBOX OIL OR FLAMMABLE LIQUIDS(SUCH AS FUEL,PETROL,GASOLINE,ETC)..
  • What You Get: Lotyes oil extractor pump, outlet hose, inlet hose, hose clamps, battery clamps, user guide. We are certain that you will love the design and high quality of the product. Because you are our number 1 priority, we are offering premium customer support and money-back service for a risk-free purchase..
Check Stock

THINKWORK Oil Pump Extractor, 12V 80W Marine Oil Change Pump and Electric Oil Pump, with Overheat Protector for Boat, Car, Speedboat, Motorcycle

  • SAFETY&OVERHEATING PROTECTION-Except engine oil, diesel oil and coolant, the oil pump must not pump any flammable liquid or water to avoid accidents. Before use, be sure to heat the car engine to 104°F-140°F for about 15 minutes to avoid clogging the oil pump due to the solidification of the oil. When the oil pump is overheated, the newly added overheat protection device will automatically cut off the power supply. At this time, please check whether the hose is blocked or the oil is too sticky..
  • QUICK OIL CHANGE - DC 12V 80W has enough power, you only need to clamp the conductive clip on the motor and open the switch to start it, so that you can complete the oil pumping work smoothly and effectively, replacing the traditional oil change method and reduce tedious workload (diesel flow: 1.5L / m, oil flow 0.3L / m)..
  • UPGRADED OIL PUMP-Everyone needs a portable and small oil pump, simple operation does not need to spend too much time for practice, widely used in motorcycles, scooters, ships, quad bikes, trucks, ships, forklifts, power generation machinery, tractors , Lawn mowers and various machinery to change the oil..
  • ACCESSORIES & PRECAUTIONS - The oil pump has 1 outlet hose, 1 inlet hose, 2 hose locks and 2 battery clips. Please pay attention to the ....
Check Stock

Engine Oil Pump

  • Melling has added this oil pump that address oiling issues frequently found in Ford 4-valve engines. The M360HV high volume oil pump provides 20% additional oil flow to assist in increasing the engines oil pressure by filling the additional clearances created by wear. As a result the pumps exceed original equipment manufacturers specifications to meet the demanding lubrication needs of those engines..
  • The pump has been designed by Melling engineering as drop-in replacement to the original equipment oil pump. No modifications to the engine, pickup tube assembly or other components are required. All the features that make our stock replacement M360 oil pumps perform so well have been utilized in the new high volume pumps this includes the coated cast iron cover plates..
  • In comparison the M360HV is a 20% higher volume version of the M360 stock replacement oil pump. In addition, the M360HV pumps have a 20 psi higher pressure relief setting/.
  • Every pump is performance tested after it is machined, cleaned, and assembled at our Jackson, MI facility. Melling is global supplier of engine parts and is ISO/TS 16949 and ISO 14001 certified..
Check Stock

AAA 90037 Horizontal Triplex Plunger Replacement Pressure Washer Pump Kit, 3700 PSI, 2.5 GPM, 3/4\ Shaft, Includes Hardware and Siphon Tube, for Industrial Gas Powered Machines, Black

  • ⭐【Reborn Your Power Washer】YAMATIC Vertical Pressure Washer Pump 7/8" Shaft MAX 3100 PSI / 2.5 GPM, Save money by replacing your pump instead of buying a new pressure washer. Top performance at 2900-3100 PSI and fit most Rear Outlet 160-196cc at 6.5-7hp engine RYOBI, Honda, Briggs and Stratton, Subaru, PowerStroke, Craftsman, Simpson, Homelite and Many other brand..
  • ⭐【Extended Durability】 High-performance double seal system prevents leakage, upgraded technical surfacing piston and bearing, get 200 hrs running time, longer than OEM power washer pump. And the thermal relief valve (TRV) protects the pump from overheating while in bypass mode. The fully anodized treatment for rust prevention, improve wear resistance and hardness of Pressure Washer Pump..
  • ⭐【Maintenance-Free】This pump features a maintenance-free crankcase so you never have to change the gasoline. This easy-to-install kit is great for power washers that can support 3100 PSI at 2.5GPM to wash walls, fences, sidewalks, vehicles, and more. ⚠ This pump also fit for the front inlet/outlet engine, but you need to rotate the pump 180 degree and drill holes in the frame to install the pump. If this is difficult for you, please choose a front inlet/outlet pump directly..
Check Stock

THINKWORK Oil Pump for Oil Change, 12V 80W Electric Oil Pump and Marine Oil Change Pump, Upgraded Oil Change Pump Extractor with Handle for Boat, Car, Motorcycle

  • ...ough power, you only need to clamp the conductive clip on the motor and open the switch to start it, so that you can complete the oil pumping work smoothly and effectively, replacing the traditional oil change method and reduce tedious workload (diesel flow: 1.5L / m, oil flow 0.3L / m)..
  • SAFE OPERATION - Except for engine oil and diesel, the oil pump must not draw any flammable liquid or water to avoid accidents. Before use, be sure to heat the car engine to 104 ° F-140 ° F (40℃-60℃) about 15 minutes to avoid clogging the oil pump due to oil solidification..
  • ACCESSORIES & PRECAUTIONS - The oil pump has 1 outlet hose, 1 inlet hose, 2 hose locks and 2 battery clips. Please pay attention to the direction of import and export, positive and negative poles and lock hose lock before use. The suction power of the micro suction pump is limited. Please do not connect other extension tubes..
  • THINKWORK GUARANTEE SERVICE - we provide satisfactory and reliable customer service. If there is any problem with this oil pump, please contact customer service in time, and you will get a satisfactory result..
Check Stock