Top Engine Oil Pump Pressure Regulator Valve

DeWalt 4 Gallon Portable Gas Powered Oil Free Honda Engine Direct Drive Air Compressor (DXCMTA5590412)

  • Features a powerful and reliable Honda GX160 OHV 163cc gas engine with precision camshaft design that offers precise valve timing and optimal valve overlap for better fuel efficiency.
  • Provides air delivery of 6.9 SCFM at 40 psi and 5.0 SCFM at 90 psi.
  • Low maintenance, oil free, direct drive pump operation.
  • Equipped with 1/4 in. regulator, tool and tank pressure gauges, and a 1 hand push to connect quick coupler.
  • Perfect companion to all of your air tools, whether it is on the top of a roof or framework on a house.
Check Stock

GSL392 Inline Fuel Pump & 58 PSI Fuel Filter Regulator 58 PSI LS Swap Fuel Pump EFI Conversion Fuel Filter Pressure Regulator 255LPH High Pressure External Pump 6AN Fittings 400-939 GSL392-400-939

  • REPLACEMENT 58 PSI FUEL FILTER REGULATOR - Fuel pressure regulator filter kit comes with 6AN adpater fittings for LS Swap , which can deliver 58 PSI (4 BAR) to your fuel rail and return unused gas to the tank. Besides, it can ensure the clean fuel is delivered properly to your engine with a 10 micron fuel filter, which play an important role in protecting the daily operation of the engine, and extending the engine service lifespan..
  • GSL392 HIGH PRESSURE FUEL PUMP - LS Inline fuel pump is designed to start higher-pressure fuel racing or performance-purpose vehicles stably and safely, which can help to meet the requirements of most modern turbocharging applications. At 80 PSI, Yinlowa 255 lph high pressure fuel pump can flow around 132 liters (35 gallons) per hour.
  • At that same 80 PSI the equivalent HP (high pressure) fuel pump can flow over 210 liters (50 gallons) per hour.
  • FITMENTS - GSL392-400-939 Inline Fuel Pump fits EFI applications including turbo and supercharged, variety of pressures and flows available, including high pressure performance.
  • 58 PSI Fuel Pressure Regulator AN-6 Fittings for LS Swap EFI Conversion i....
Check Stock

JIFETOR Oil Pressure Gauge Tester Kit Engine Transmission Fluid Test Tool Set 12PCS, 500psi Automotive Mechanical Automatic Gearbox Line Pressure Meter for Car Truck Motorcycle ATV

  • ENGINE AND TRANSMISSION OIL PRESSURE TEST AND DIAGNOSTIC: This oil pressure tester kit is used for measuring oil pressure on lubrication system quickly and accurately. The oil pressure gauge readings assist to diagnose if there are following problems: blocking oil strainer or oil filter, broken pressure-limiting valve spring, poorly working oil pump, low/high oil viscosity, blocking lubrication oil channel, blocking oil filter core and by-pass valve is difficult to open etc..
  • EASY TO CHECK ENGINE OIL PRESSURE: Remove low oil pressure switch, attach the engine pressure tester with appropriate adapter, start engine to read the pressure on the gauge. Verify vehicle oil pressure is normal or not against manufacturer's recommended readings. Turn off the engine and remove the engine oil pressure tester, replace the low oil pressure switch, then done..
  • FITMENT TYPE: The transmission pressure gauge kit includes 12PCS selectable brass connectors (include the one on hose), very sturdy and durability. These connectors can be connected to the corresponding sizes oil pressure test service port, on most vehicles with gasoline or diesel engine, includes car, motorcycle, ATV, truck and so on..
  • PRESSURE GAUGE AND HOSE: Transmission pressure gauge adopts rubber cover pro....
Check Stock

Dasbecan 7.3 IPR Fuel Injection Pressure Regulator Valve & ICP Control Sensor 7.3 powerstroke Compatible with Ford F250 F350 F450 F550 F650 F750 E350 E450 E550 F81Z9C968AA 1829856C91 1841217C91

  • Compatible with Ford F-250 F-350 F-450 F-550 F-650 F-750 E-350 E-450 E-550 IPR Valve & ICP Sensor 7.3 powerstroke, please view the following....
  • Replace Part number: F81A9C968AA, F81Z9C968AB, AP63402, F81Z9C968AA, F81Z-9C968-AB, F5TZ9C968A, 1841217C91, 1829856C91, 1836412C91, 1841086C91,....
  • The 7.3L fuel injection pressure regulator IPR valve & ICP control sensor installation is super easy and direct fitment and perfect replacement, meets....
  • The 7.3L injector pressure regulator valve can be located behind the engine attached to the high pressure oil pump (HPOP). If you are experiencing no....
  • Warranty: For any reason, if you are not satisfied with your purchase, contact us directly. We would reply in 24 hrs. One-year warranty, 100%....
Check Stock

Engine Oil Pump

  • Melling has added this oil pump that address oiling issues frequently found in Ford 4-valve engines. The M360HV high volume oil pump provides 20% additional oil flow to assist in increasing the engines oil pressure by filling the additional clearances created by wear. As a result the pumps exceed original equipment manufacturers specifications to meet the demanding lubrication needs of those engines..
  • The pump has been designed by Melling engineering as drop-in replacement to the original equipment oil pump. No modifications to the engine, pickup tube assembly or other components are required. All the features that make our stock replacement M360 oil pumps perform so well have been utilized in the new high volume pumps this includes the coated cast iron cover plates..
  • In comparison the M360HV is a 20% higher volume version of the M360 stock replacement oil pump. In addition, the M360HV pumps have a 20 psi higher pressure relief setting/.
  • Every pump is performance tested after it is machined, cleaned, and assembled at our Jackson, MI facility. Melling is global supplier of engine parts and is ISO/TS 16949 and ISO 14001 certified..
Check Stock

SMACO Scuba Tank 1L Mini Scuba Tank S400 Scuba Diving Tank Diving Equipment

  • ...of 1L, and can be used for 340 times underwater breath when full inflated, it’s about 15-20 minutes(the diving time determined by the breathing rate). This mini scuba tank only weight for 5.07 lb, with the equipped portable bag, you can easily carry it and free your hands to do more underwater. You can also split regulator and tank body and put them in the portable case, then you can take them on plane to diving in any place..
  • ✅【PERFECT COMPATIBILITY】 : The scuba tank’s inflation interface is 8mm, and the work pressure is 3000Psi/200Bar/20Mpa. It has three inflate ways: scuba adapter, electric pump and SMACO high pressure hand pump. When inflate with electric pump, please equipped with oil-water separator.
  • when use other hand pumps, please make sure it can reach up to 3000Psi. NOTE: using the hand pump to reach up to 3000Psi is tired, it takes about 30-45 minutes, we suggest to use it as a backup inflation devices..
  • ✅【HIGHT QUALITY MINI SCUBA TANK】: The tank body was made of aviation aluminum, can better resists to seawater corrosion and stands up well to damage. The regulator include inflation interface(8mm), pressure gauge, air switch, explosion valve, constant pressure valve. and the second-stage valve include mouthpiece, relief valv....
Check Stock

YSTOOL 10L Pneumatic Fluid Extractor Dispenser Set ATF Refill Tool Kit for Changing Oil in Engine Transmission Differential Transfer Case Gear Gearbox Power Steering Coolant with Pump Assembly Tank

  • ...ery easy. Pneumatic tool, works with vacuum pump to extract and with air pump to refill, ensuring high efficient and labor-saving.
  • Pump assembly incorporates the container cover, the handle trigger with lock, 2-way control valves for conversing evacuate and dispense, safety valve for automatically releasing excessed pressure (above 43psi /3bar), 1/4" American style air inlet plug, pressure gauge (0-80psi/0-6bar) for monitoring the pressure change, quick coupler for connecting main hose. 10L big capacity well constructed container, is marked with accurate scale to help observe the amount of liquid. Stable base avoids dumping.
  • The main hose is 80" long, with a quick plug on one side to connect the container, and a quick coupler on the other side to connect the dipstick tubes or ATF adapters. There is a ball valve on the quick coupler to control the fluid flow, very convenient. Please note, there is no instruction in the kit, please refer to your vehicle operation instruction and following product description to operate. Your satisfaction and recognition are always what we pursue, please contact us to resolve any issue.
Check Stock

SMACO Scuba Tank 1L Mini Scuba Tank S400 Scuba Diving Tank Diving Equipment

  • ...y of 1L, and can be used for 340 times underwater breath when full inflated, it's about 15-20 minutes(the diving time determined by the breathing rate). This mini scuba tank only weight for 5.07 lb, with the equipped portable bag, you can easily carry it and free your hands to do more underwater. You can also split regulator and tank body and put them in the portable case, then you can take them on plane to diving in any place..
  • ✅【PERFECT COMPATIBILITY】 : The scuba tank's inflation interface is 8mm, and the work pressure is 3000Psi/200Bar/20Mpa. It has three inflate ways: scuba adapter, electric pump and SMACO high pressure hand pump. When inflate with electric pump, please equipped with oil-water separator.
  • when use other hand pumps, please make sure it can reach up to 3000Psi. NOTE: using the hand pump to reach up to 3000Psi is tired, it takes about 30-45 minutes, we suggest to use it as a backup inflation devices.
  • ✅【HIGH QUALITY MINI SCUBA TANK】: The tank body was made of aviation aluminum, can better resists to seawater corrosion and stands up well to damage. The regulator include inflation interface(8mm), pressure gauge, air switch, explosion valve, constant pressure valve. and the second-stage valve include mouthpiece, relief valve an....
Check Stock

SMACO Scuba Tank 1L Mini Scuba Tank S400 Scuba Diving Tank Diving Equipment

  • ...y of 1L, and can be used for 340 times underwater breath when full inflated, it's about 15-20 minutes(the diving time determined by the breathing rate). This mini scuba tank only weight for 5.07 lb, with the equipped portable bag, you can easily carry it and free your hands to do more underwater. You can also split regulator and tank body and put them in the portable case, then you can take them on plane to diving in any place..
  • PERFECT COMPATIBILITY : The scuba tank's inflation interface is 8mm, and the work pressure is 3000Psi/200Bar/20Mpa. It has three inflate ways: scuba adapter, electric pump and SMACO high pressure hand pump. When inflate with electric pump, please equipped with oil-water separator.
  • when use other hand pumps, please make sure it can reach up to 3000Psi. NOTE: using the hand pump to reach up to 3000Psi is tired, it takes about 30-45 minutes, we suggest to use it as a backup inflation devices..
  • HIGH QUALITY MINI SCUBA TANK: The tank body was made of aviation aluminum, can better resists to seawater corrosion and stands up well to damage. The regulator include inflation interface(8mm), pressure gauge, air switch, explosion valve, constant pressure valve. and the second-stage valve include mouthpiece, relief valve and breath tube. Wh....
Check Stock

0-140 PSI Adjustable Universal Fuel Pressure Regulator, Aluminum Gas Oil Injection Pressure Regulator Kit with Gauge, AN6-6AN Fuel Line Hoses, Install Tool Accessories

  • Adjust Capacity-The fuel pressure regulator is equipped with a reading gauge. The maximum fuel pump capacity is 140psi and can be adjusted from 0psi to 140psi. You can adjust the fuel pressure regulator to your needs and optimize the flow of oil.
  • Universal for All Type Cars. Adjustable fuel pressure regulator, made of Premium aluminum construction, the effect is directly reflected in the throttle more easily, sensitively, and the power is more obvious when increasing speed. Used to Keep the Stable Pressure in the Fuel System.
  • Built-In Diaphragm-The built-in diaphragm, made of special material, controls the opening and closing of the pressure valve, which has a certain buffer effect on the average fuel pressure and makes the oil pressure more stable.
  • Function of The Universal Fuel Pressure Regulator, Universal fuel pressure regulator for fuel injection can increase the proper amount of fuel injection without changing the fuel supply mode of the computer, saving the cost of the fuel booster.
  • The Role of The Fuel Pressure Regulator Kit, Prevents stalling, flooding and other drivability issues by ensuring your carbs are getting the right amount of fuel pressure.
Check Stock

YAMATIC 7/8\ Shaft Vertical Pressure Washer Pump, 2600-3000 PSI @ 2.5 GPM OEM & Replacement Pump for Power Washer Compatible with 308653052, 308653093, 308653009, 308653008, 308653006

  • 003e Pressure washer pumps replacement is designed to replace the (horizontal) mounted pump, and insert to a 3/4" shaft engine, come with 45mm keyway.
  • 003e Power Washer Pump Pressure Pump: 2400 - 2800 PSI , Flow Rate: 3.1 GPM, Power:5-7 HP, Inlet: 3/4" thread, Outlet: M22, RPM:3400, Max. Water Supply Temperature: 104°F.Fits troy-built models and more models. Not fits all series. Please check the pump housing, pump shaft size, pressure power and the pump mounting size fit you pressure washer or not!.
  • 003e Fit Most Horizontal Pressure Washer Engine 196cc to 224cc : Such as some models of Honda, Generac, Briggs & Stratton, Craftsman, Karcher, Blackmax,Ryobi, Troy-Bilt, Craftsman. - BUT You should ask us previously if you are not sure this power pump would fit or not ! Not fit all series models, pls check the mounting size, pressure power and shaft size before you buy. Nothing is worse than having to return a product. Let’s work together to avoid this !.
  • 003e Pressure Washer Pump Parts Pre-filled with oil and ready to use - Comes with Easy start valve (EZ), Thermal relief valve (Made in USA), Chemical Injection & Unloader, Aluminum pump head, Key way stock.
  • 003e 100% Satisfaction Seller Service: EZJOB pressure washer pumps promise 48 Hours Pre-Sale a....
Check Stock

JIFETOR Oil Pressure Tester Kit, Professional Engine Diagnostic Test, 100PSI Pressure Gauge Tool with Hose Adapter for Truck Car ATV

  • OIL PRESSURE TEST AND DIAGNOSTIC: JIFETOR engine oil pressure tester kit is used for measuring oil pressure on lubrication system quickly and accurately. The gauge readings assist to diagnose if there are following problems: blocking oil strainer or oil filter, broken pressure-limiting valve spring, poorly working oil pump, low/high oil viscosity, blocking lubrication oil channel, blocking oil filter core and by-pass valve is difficult to open etc..
  • FITMENT TYPE: The oil pressure test tool includes 3 sizes (1/8" NPT, 1/4" NPT, 3/8" NPT) selectable brass adapters, can be connected to the corresponding sizes oil pressure test service port, on most gasoline or small diesel engine, includes car, motorcycle, ATV, truck and so on, which oil pressure not exceeds 100psi..
  • PRESSURE GAUGE AND HOSE: Pressure gauge adopts rubber cover protected 3" large dial. 0-100psi and 0-7bar small scale range with big dial, very easy to read. No pressure holding function, return to zero automatically. The 30" long rubber nylon resin hose, is equipped with a 1/8" NPT brass adapter, can be connected to 1/4" NPT and 3/8" NPT adapters directly. Max working pressure: 300psi.
  • EASY TO OPERATE: When you want to test the oil pressure by this engine oil pressure diagnostic gauge, disasse....
Check Stock