Top Engine Vacuum Gauge

GlowShift White 7 Color 30 PSI Turbo Boost / Vacuum Gauge Kit - Includes Mechanical Hose & T-Fitting - White Dial - Clear Lens - for Car & Truck - 2-1/16' 52mm

  • GlowShift White 7 Color Series 30 PSI Boost/Vacuum Gauge is Designed to Monitor Boost Pressure & Vacuum Compression Levels of Your Car’s Turbo or Supercharged Engine.
  • Boost Readings from 0 to 30 PSI & Vacuum Readings from -30 to 0 inHg – 2-1/16″ (52mm) Gauge with White Dial, Clear Lens & Illuminated Red Needle.
  • 7 Solid Color Modes & 2 Color Cycle Modes Allow You to Match Your Factory Dashboard Lights or Add a Custom Style to the Interior of Your Vehicle – Colors Include Blue, Red, Green, Teal, Purple, White & Yellow – Connecting the Dimmer Wire to the Headlight Switch Reduces Brightness of the Gauge by 30% When the Headlights are On.
  • Includes 6′ Silicone Hose, 1/8″ T-Fitting, 2 Hose Clamps, 2′ Power Wire, Gauge Visor, Mounting Hardware & Installation Instructions.
  • GlowShift Guarantee with One Year Limited Warranty & Free Lifetime Technical Support.
Check Stock

ATPEAM Vacuum and Fuel Pump Tester Gauge Kit, Fuel Pump Pressure & Vacuum, Carburetor Intake Manifold, & Vacuum Test

  • ...nch (3cm) thickness with rubber side notches, easy to read and grip.
  • Extra-long rubber hose and 14mm/18mm manifold adapter.
  • Rubber hose 40 PSI (2.8 Bar) maximum working pressure.
  • Professional Tester Kit: Fuel Pump Pressure & VacuumTester Gauge Kit, Carburetor Test enables testing of the fuel delivery pressure to the engine to check for worn or defective parts.
  • Diagnose leaking valves, incorrect timing, leaky intake manifolds, and clogged mufflers. Fuel pump operating pressures up to 10 PSI (0.7 Bar), Pressure gauge 0-28 IN-Hg (0-70 cm-HG) vacuum and 0-10 PSI (0-0.7 kg/cm²) pressure.
  • Easy Storage: All the tools are well organized in a storage case for easy transportation, simple storage, and quick identification.
  • Package Includes: 1x Gauge,1x 24-inch long rubber hose 40 PSI,1x brass cone adapter,2x plastic connector,1x 1/4" x18 male to 1/8" -27 female brass adapter,1x 1/8”-27 male to 7/32" barbed brass fitting adapter,1x 1/8"-27 female to 3/8" male brass adapter,1x T-type 7/32" barded fitting adapter.
Check Stock

MaxTow Double Vision 30 PSI Turbo Boost / Vacuum Gauge Kit – Includes Electronic Pressure Sensor – White Gauge Face – Blue LED Dial – Analog & Digital Readouts – for Gas Trucks – 2-1/16″ 52mm

  • MaxTow 30 PSI Boost/Vacuum Gauge is Designed to Monitor Boost Pressure & Vacuum Compression Levels of Your Truck’s Turbo or Supercharged Engine.
  • Boost Readings from 0 to 30 PSI & Vacuum Readings from -30 to 0 inHg – 2-1/16″ (52mm) Gauge with White Dial, Clear Lens, Illuminated Red Needle & Digital Display.
  • Double Vision Display with Analog & Digital Readouts – Blue LED Backlighting – 3 Daytime & 3 Nighttime Dimming Modes.
  • Includes Electronic Pressure Sensor, 9′ Sensor Harness, 5′ Power Harness, 3′ Silicone Hose, 1/8″ T-Fitting, 2 Hose Clamps, Air Filter, Gauge Visor, Mounting Hardware & Installation Instructions.
  • MaxTow Guarantee with One Year Limited Warranty & Free Lifetime Technical Support.
Check Stock

MaxTow Double Vision 30 PSI Turbo Boost / Vacuum Gauge Kit - Includes Electronic Pressure Sensor - Black Gauge Face - Green LED Dial - Analog & Digital Readouts - for Gas Trucks - 2-1/16' 52mm

  • MaxTow 30 PSI Boost/Vacuum Gauge is Designed to Monitor Boost Pressure & Vacuum Compression Levels of Your Truck's Turbo or Supercharged Engine.
  • Boost Readings from 0 to 30 PSI & Vacuum Readings from -30 to 0 inHg - 2-1/16" (52mm) Gauge with Black Dial, Clear Lens, Illuminated Red Needle & Digital Display.
  • Double Vision Display with Analog & Digital Readouts - Green LED Backlighting - 3 Daytime & 3 Nighttime Dimming Modes.
  • Includes Electronic Pressure Sensor, 9' Sensor Harness, 5' Power Harness, 3' Silicone Hose, 1/8" T-Fitting, 2 Hose Clamps, Air Filter, Gauge Visor, Mounting Hardware & Installation Instructions.
  • MaxTow Guarantee with One Year Limited Warranty & Free Lifetime Technical Support.
Check Stock

EKDJKK Carburetor Gauge Vacuum Synchronizer Gauge 2/3/4 Cylinder Sync Gauges Kit Testing Vacuum Gauge Kit Balancer Carburetor Synchronizer Motorcycle Accessory

  • 【Fits Your Applications】Carburetor adjustment tool kit Can also be used for most standard 2 to 4 carburetor systems.
  • 4 cylinder carburetor synchronizer carb sync tool works on your motorcycle, race car, and auto A/C vacuum motor.
  • 【Efficient】Quickly and accurately check the compression on the gasoline engine, the simple pressure release button on the side of the tester..
  • 【Easily Synchronize Your Carburetors】Before each use, confirm carb sync gauges are zeroed out - Recalibrate, if necessary.
  • Attach your carburetor flanges to the 4 carb synchronizer tool, idle your engine, and adjust screws between the carburetors into alignment.
  • Synchronize to manufacturer specifications.
  • 【Features】This kit allows you to synchronize the values of 4 carburetors, as well as adjust or set them. Tests both mechanical and electrical fuel pumps, and checks for worn or defective parts in fuel pump and vacuum system..
  • 【Package Includes】1 x Vacuum Synchronizer Gauge, 2 x Vacuum Hoses, 4 x Connectors, 4 x Carb Extension Rods.
Check Stock

Hromee Fuel Pump and Vacuum Tester Gauge Carburetor Pressure Diagnostics Leakage Tool Kit

  • ... set can be used to test fuel pump pressure, emission control devices, leaky, stuck open or burnt valves. Clogged muffler, turbo or exhaust system. Helps to locate leaks in the gas line, valve timing, worn out rings and seals, heating and air conditioning components..
  • CAR VACUUM TESTER - Also can be used for testing engine vacuum lines, brake assist system, carburetor and intake manifold for leaks, vacuum or pressure loss. Set includes a variety of adapters suitable for most vehicles.
  • Intended for carburetor engines with a mechanical fuel pump operating pressures below 10 PSI (0.7 Bar)..
  • PRESSURE GAUGE - The gauge has 4 inches diameter large scale, color-coded measurement, rubber surrounded protective and a hook on the top. so it’s easy to read and use. Range of vacuum dials is 0-28in/Hg Vac, 0-70cm/Hg.
  • Range of pressures dials is 0-10 psi/g, 0-0.7 kg/cm2..
  • HOSE AND ACCESSORIES - The kit comes with a 2ft/61cm rubber hose (13/64-inch ID and 23/64-inch OD). The max working pressure is 40PSI. Other accessories include (1)conical adapter, (1)plastic connector, (1) 1/4”x18 male to 1/8”-27 female adapter, (1)1/8”-27 male to 7/32”barbed fitting adapter, (1)1/8”-27 female to 3/8”male adapter, (1)T-type 7/32”barded fitting adapter..
Check Stock

6-CHANNEL - The Digi Sync | Digital Throttle Body Sync Tool | Digital Carb Sync Tool | Vacuum Gauge Digital Peaking Manometer | Model DS3 | NOT Motion Pro Syncpro or Alpha Moto

  • 6 CHANNEL -Digital Carb Sync Tool | Digital Vacuum Gauge (Digital Peaking Manometer) | Works on vehicles with 2, 3, 4, 5, or 6 Carbs or Throttle....
  • Comes with a set of 5mm & 6mm adapters and replacement vacuum caps.
  • Balancing will improve POWER, response time, smoothness, performance, operating temperature of your engine. This leads to better gas mileage with....
  • Digital balancing is better because it is more accurate than fluid or gauge synchronizers and there is no need to interpret bouncing gauge needles.....
  • Battery operated (no cords)! Measures & Displays RPM - MADE IN THE USA!.
Check Stock

Mityvac MV8000 Professional Single Person Manual Brake and Clutch Bleeding Tune-up Kit

  • The MV8000 kit includes: Selectline hand-vacuum pump (Model MV8010).
  • (4) connection tubes (24", 1-1/2", 3", 3-5/8") and cupped and tube adapters..
  • Performs one-person engine performance diagnostics, vacuum brake and clutch bleeding, fluid transfer, evacuation, sampling, windshield repair, turbocharger testing and diesel fuel priming..
Check Stock

Coolant Vacuum Refill Tool Kit Engine Cooling System Vacuum Purge & Refill Kit New Coolant Bleeder Kit with 4 Rubber Sleeves & 1 Universal Adapter Cone Plug (with Carrying Case) (4 Connectors)

  • ...UM TYPE COOLANT FILLING FUNCTION: Pneumatic vacuum coolant filler first sucks and forms a vacuum on the cooling system by using shop air, then draws coolant into the cooling system.(Need vacuum pump and not included in the kit) Add coolant in vacuum, there is no large air pocket and avoid warping or other damage in engine. Normally, it takes 5-10mins to refill the coolant, the exact time depends on the size of the tank. Easy to operate and save time.
  • WIDELY USAGE RADIATOR PURGE AND ANTIFREEZE REFILL TOOL: JIFETOR antifreeze filler kit includes a universal tapered rubber adapter, with MIN. diameter 1.5CM and MAX. diameter 5CM, fits for almost all types of vehicles. The adapter can replace the radiator cap to seal the cooling system, and connect with the quick coupler on coolant refiller to help to fill antifreeze..
  • WATER TANK COOLANT VACUUM REFILL: Plastic covered premium brass manifold body, equipped with brass fittings, anti-corrosion and durable. The index range of gauge is -30~0inHg (-76~0cmHg), and normally -25~-20inHg is right time to add coolant. 18" rubber resin material weave reinforced hose, featured with anti-corrosion, low fluid resistance, high bearing pressure, ensure durability and good air sealing. Also there is a 21" metal chain hook fo....
Check Stock

YSTOOL Radiator Pressure Tester Pneumatic Vacuum Type Purge Refill Kit Universal Automotive Cooling System Water Tank Leak Test and Coolant Fill Tool 28PCS Set with Adapters Gauge Black Case

  • ... pointer drops over time to confirm a system leak..
  • Vacuum coolant filler uses shop air to draw a vacuum, by using the connected coolant filling hose to extract new coolant and transfer it into the cooling system with no air pockets produced. Adding coolant in vacuum condition will not appear large cavitation, avoid engine warping and other damage. Coolant vacuum refill tool adopts superior brass manifold body with plastic cover, and 18" long rubber hose, brass parts for anti-corrosion and durability..
  • Normally, coolant pressure tester and refill kit takes about 10 mins to test leak and 5-10 mins to refill coolant. Simple time-saving operation. Also much cheaper than the maintenance cost or a new engine. Black blow-molded case makes for easy transportation, simple storage, and quick identification. This set is ideal for a variety of domestic and import vehicles. Suitable for Ford, Mercedes Benz, GM, Jeep, Oldsmobile, Pontiac, Buick, Chevrolet, Chrysler, Dodge, etc..
  • Thermometer uses stainless steel material, with scale range of 0 - 200℃(32 - 400℉). 21PCS color coded radiator adapters have the exact corresponding serial numbers and positions on the picture, and are equipped with detailed applicable models in instruction for easy reference. American a....
Check Stock

BOSCH (FIX 7803 Vacuum and Pressure Tester Kit, Black

  • Great way to fine tune carburetion and timing for peak performance and maximum fuel economy.
  • Use to test fuel pump pressure, mechanical condition of the engine, vacuum control system function, and much more.
  • Use to find: intake manifold leaks, blown manifold and head gaskets, worn piston rings, burned valves, and leaking vacuum lines on conventional and computer-controlled vehicles.
  • Easy-to-read, 3-1/2 inch diameter face displays 0-30 inches vacuum (0-70cm) and 0-10 pounds (0-70 kPs) of pressure in both standard and metric scales.
  • Includes gauge, hose, multiple adapters, and detailed usage and testing instructions in English, Spanish, and French. Note: fuel system functions are for carbureted engines only - not for use on fuel injected vehicles.
Check Stock

Automotive Smoke Leak Detector Tester EVAP Smoke Machine with Dual Mode

  • .... If the pressure gauge continues to decrease, Explain that the pipeline leak needs to be repaired..
  • 【EVAP Detection】American cars that began production in 1996 are equipped with EVAP service ports.
  • in most American cars, the EVAP service port is usually located in the engine compartment, but the EVAP service port of some special models may be located in other locations. Open the plastic cover of the EVAP service port, then use the spool wrench to remove the check valve clockwise, then install the EVAP service port adapter, and introduce smoke from the port into the EVAP leak detection system..
  • 【Wide Testing Range】Built-in air pump,The smoke leak detector can do smoke testing of multiple systems, such as EVAP systems, Intake Systems, Cooling / EGR /Exhaust Systems, Crankcase Systems, Engine Airtightness, Vacuum Leaks, Low Pressure Turbo leaks.Applicable cars, motorcycles, snowmobiles, off-road vehicles, ATVs, light trucks and speedboats boats..
Check Stock