Top Environmental Machinery

Heyiarbeit 8mmx10mm Clamp Tight Motor Shaft 2 Diaphragm Flexible Coupling

  • [Technical Parameter] Shaft Usage: 8 mm / 0.31" to 10 mm / 0.39".
  • Total Size: 45mm x 34mm / 1.77" x 1.34" (LxD).
  • [High Quality] Made of high strength aluminum alloy, excellent bearing capacity, long service life.
  • Need no lubrication, convenient and quiet to use.
  • [Feature] Stable and reliable performance, with good vibration damping, buffering and electrical insulation performance.
  • [Application] Widely used in shafting transmission of various mechanical devices, such as pumps, fans, compressors, hydraulic machinery, petroleum machinery, printing machinery, textile machinery, chemical machinery, mining machinery, metallurgical machinery, aviation (helicopter), ship high-speed power transmission system, steam turbine, piston power mechanical transmission, etc.
Check Stock

Belimo | Z3075Q-J+CQB24-3 | ZoneTight | 0.75\ | 3 Way | 5.9 Cv | w/ Non-Spg | 24V | On/Off/Floating

  • The whole body is made of aluminum alloy, light and strong, convenient to use..
  • Widely used in all kinds of shaft transmission of mechanical device, such as the water pump (especially high power), chemical pump, fan, hydraulic machinery..
  • Suitable for petroleum machinery, printing machinery, textile machinery, chemical machinery, mining machinery, metallurgical machinery, aviation (helicopters), ships power transmission system..
  • Suitable for piston mechanical power transmission system, tracked vehicles, as well as generating set high power mechanical drive system, the dynamic balances after applied in transmission shafting were common..
  • Quality assurance, easy and convenient to use, having long service life..
Check Stock

MXBAOHENG M3-M12 Pneumatic Tapping Machine Air Drill Tapper for Universal Flexible Arm Portable for Using Chuck Size: M3,M4,M5,(M6),M8,M10,M12 (400rpm)

  • 【Tapping Range】M3-M12, Bracket can be installed,bracket need to be prepared by yourself, suitable for pipeline mechanical tapping..
  • 【Application】This pneumatic tapping machine is applicable to all machinery manufacturing industry, machine tools, tooling machinery, plastic machinery, printing machinery, packaging machinery, engineering machinery, automobile and motorcycle parts, aircraft engines and other general purpose machinery industries. Tapping for copper, iron, aluminum, steel, stainless steel, plastic and wood, and other material..
Check Stock

Beduan 3/8\NPT Compressed Air Filter Regulator Lubricator Combo（0-230 psi）, Air Tool Compressor Filter Water/Oil Trap Separator with Guage, Manual Drain

  • 3/8"NPT Filter 3 in 1 Oil Air Pressure Regulator Filter with Lubricator Cup.
  • Max Supply Pressure:230 psi.Filter cup capacity:0.74ounces(22cc).
  • 5 Micron Filter Element.Environment temperature:14℉-140℉.
  • Manual Drain, Poly Bowl,Pressure Gauge, Bracket Included.
  • Application: Widely used in machinery, environmental protection, metallurgy, textile, printing and dyeing, medicine, food, light work, ship, locomotive, scientific research, etc..
Check Stock

Heyiarbeit 10mm to 10mm Shaft Coupling Aluminium Flexible Plum Coupling D30 L35 Connector Flexible Coupler for 3D Printer CNC Machine and Servo Stepped Motor

  • [Technical Parameter] Shaft Usage: 10 mm / 0.39" to 10 mm / 0.39".
  • Total Size: 35mm x 30mm / 1.38" x 1.18" (LxD).
  • [High Quality] Made of high strength aluminum alloy, excellent bearing capacity, long service life.
  • Need no lubrication, convenient and quiet to use.
  • [Feature] Stable and reliable performance, with good vibration damping, buffering and electrical insulation performance.
  • [Application] Widely used in shafting transmission of various mechanical devices, such as pumps, fans, compressors, hydraulic machinery, petroleum machinery, printing machinery, textile machinery, chemical machinery, mining machinery, metallurgical machinery, aviation (helicopter), ship high-speed power transmission system, steam turbine, piston power mechanical transmission, etc.
Check Stock

Vktech 4 Pcs SC20UU 20mm Aluminum Linear Motion Ball Bearing Slide Bushing for CNC

  • High Quality: Made of professional aluminum material for rails, it has super wear and corrosion resistance and stable chemical properties for long time use.
  • Feature: Strong rigidity, small friction coefficient, can support smooth sliding.
  • Specification: Model: SCS12LUU, Nominal Shaft Diamter (dr): 12mm.
  • Wide Application: Widely used in printing machinery, electronic equipment,woodworking machinery, door and window machinery, packaging machinery, medical machinery and other equipment.
  • 100% Satisfied Service: Enjoy a smooth&worry-free return service within a month.
  • any questions feel free to contact us, we will be here for you..
Check Stock

Pack of 4Pcs 16 mm SC16UU SCS16UU Linear Ball Bearing Slider Slide Bushing For Replacement CNC

  • High Quality: Made of professional aluminum material for rails, it has super wear and corrosion resistance and stable chemical properties for long time use.
  • Feature: Strong rigidity, small friction coefficient, can support smooth sliding.
  • Specification: Model: SCS12LUU, Nominal Shaft Diamter (dr): 12mm.
  • Wide Application: Widely used in printing machinery, electronic equipment,woodworking machinery, door and window machinery, packaging machinery, medical machinery and other equipment.
  • 100% Satisfied Service: Enjoy a smooth&worry-free return service within a month.
  • any questions feel free to contact us, we will be here for you..
Check Stock

Noise Suppressor Power EMI Filter Termianl Single-Phase Line-Conditioner JREle AC 115/250V 30A JRW1230-44

  • The equipment of laboratory, Communication transmission system equipment, Uninterruptible Power Supply, Medical equipment, Servo frequency control equipment, Automation equipment,Precision machinery.
  • Hi-pot Test,1450VDC 2sec (L to N) ,1450VDC 2sec (L to N) ,1500VAC 2sec (L/N to G),Working Temperature 25/85/21 (-25¡ãC to +85¡ãC)1-30A.
  • Plastic shell material: high temperature resistance 200 degrees, flame retardant, environmental protection, strong resistance Notice: The filter must be connect the ground wires ,otherwise, the effect shall be reduced by 50%..
  • Rated Voltage 125/250VAC,Operation Frequency 50/60Hz,Rated Current 1-30A.
  • Product size£º92X62X49mm,Net Weight: 380G.
Check Stock

PLC Controller, Programmable Logic Controller PLC Regulator DC 24V FX1N-20MR Industrial Control Board 86 x 73 x 20mm

  • Y0 can send 10K pulse, the function is compatible with FX1N series, input highspeed pulse C235, C251.
  • Has undergone multiple antiinterference designs, without fear of various harsh electromagnetic interference working environments.
  • Flexibly used in various industrial automatic control occasion, such as metallurgy, chemical industry, plastics, textile, food, packaging, printing, building materials, woodworking, central air conditioning, environmental protection equipment.
  • Suitable for industrial control equipment for production machinery, industrial assembly lines, and various machine tools in industries such as single process control devices.
  • Relay output module come with small size, stable structure and excellent performance.
Check Stock

Beduan 270pcs Compressor O Rings Kit 18 Sizes Car Air Conditioning AC Rubber O-Ring Gasket Assortment Set (Green)

  • Made of commercial grade Nitrile Butadiene Rubber (NBR) material with corrosion resistance, abrasion, high temperature and high pressure.
  • NBR O-rings can be used under -40°C (-40°F) to 120°C (248°F) temperature.
  • Rubber Gasket provide a good sealing to prevent water leakage in oil lines, fuel plumbing, faucets, sinks, filters, toilets, and machinery.
  • Wide Applications for electronic equipment , Pipes, faucets, pumps, solenoids, pressure gauges, sensors, autos, motorcycles, ships, engines, spray guns, etc.
  • No contact corrosion, no pollution medium, no abnormal smell, environmental friendly. Different size O rings in one plastic organizer case, the required size can be easily selected, eliminating the trouble of sorting and selecting the size.
Check Stock

2Pcs Drag Towing Chain Flexible Drag Chain Cable for Numerical Control Electronic Equipment Stone Machinery

  • Premium Quality: The drag chain can be coordinated with the moving parts of the machine tool machinery and equipment, which can exert safety protection and guidance capabilities, extend the service life of the protected cables, oil pipes, and air pipes, and reduce consumption..
  • Widely Applications: Widely used in CNC machine tools, three‑dimensional printers, electronic equipment, stone machinery, door and window machinery, injection molding machines, manipulators, overweight transportation equipment, automated warehouses, processing centers, automated machinery and equipment, etc..
  • Advantages: Can improve cables and tubing. Professional manufacturing, stable performance and high reliability, which has passed strict quality control, you can use it with confidence..
  • Product Brief: The messy distribution of trachea, neatly and regularly arranged together, can increase the overall artistic modeling effect of machine tool machinery and equipment..
  • Item type: Drag Chain, Material: Nylon, Color: As picture shown, Inner diameter: Approx. 10x10mm/0.4x0.4in, Rotation radius: Approx. 28mm/1.1in, Weight: Approx. 426g..
Check Stock

SQINAA Titanium Sheet 3x200x200mm TA2 for Aerospace Industrial Processes Automotive DIY,100x150x3mm

  • Titanium is a group IVB in the fourth cycle of the periodic table of chemical elements. It is a kind of silver white, characterized by light weight, high strength, metallic luster, and resistance to wet chlorine corrosion. Uses: Electronics, chemical industry, watches, glasses, jewelry, sports goods, machinery and equipment, plating equipment, environmental protection equipment, Golf and precision processing industries..
  • Name: High Purity Titanium Foil Titanium Plate.
  • 10mm (if you need other thickness, please contact us).
  • Packaging: Vacuum Packaging/Self-sealing Bag.
Check Stock