Top Epdm Grommets

DEKTITE #9 (DFE109B) Square Black EPDM Flexible Pipe Flashing, Roof Jack, Pipe Boot Flashing (for OD Pipe Sizes 9\ - 20\)

  • Dektite Base Seals Against Uneven Metal Roofing with Ease. Pipe Flashing Will Not Break or Crack..
  • This Pipe Flashing Boot Made By Deks is Made of EPDM for Long Life Even at Extreme Temperatures.
  • Black Dektite Pipe Flashing is Rated for Continuous Service Temperature Ranges of -58˚F to +239˚ F.
  • Black (EPDM) Boot with Flexible Base (Aluminum Collar). Pipe Boot Fits 9” to 20” Pipe OD..
  • Black (EPDM) Dektite SQUARE Standard Flexible Pipe Boot Flashing. Base is 26-3/4" X 26-3/4".
Check Stock

FixtureDisplays® EPDM/Chloroprene Bonding Adhesive 2KG (4.4 lbs) in 3L Tin Can Can is 2/3 Full Rubber Bonding Glue Chipboard Glue 11808-NPF

  • FixtureDisplays EPDM/Chloroprene Bonding Adhesive 2KG (4.4 lbs) in 3L Tin Can Can is 2/3 Full Rubber Bonding Glue Chipboard Glue. This EPDM Bonding Adhesive is a solvent based contact adhesive. Bond rubber/EPDM to insulation, wood, metal, concrete and other acceptable substrates. Also work great with Chipboard/ set up box applications..
  • Widely apply for diverse materials, such as plastic board, leather, fireproof boards, plywood, stone, stainless steel panel, electronic, fabric, metal, flooring, rubber, aluminum sheet and more! Overall Size: 5.9"L x 4.7"W x 9.4"H. Capacity: 2KG (4.4 lbs). Material: Rubber..
Check Stock

Vaincre 4 PCS TR416 Metal Valve Stems, Tire Valve Stems, High Pressure Valve Stems Outer Mount Fits 0.453\ and 0.625\ Rim Hole, 1 1/2\ Long (Silver)

  • TR416 Metal Valve Stems - Valve Stem is used to keep the air in a tire. Tire valve stems should be inspected periodically for cracking, leaking or deterioration, and they should be replaced as needed. Vaincre metal valve stems can ensure no air loss occurs while driving the vehicle..
  • 2 Types of Diameter Rubber Grommet - Vaincre metal valve stem is suitable for tubeless tire which rim hole 0.453" or 0.625". Choose which one of the black rubber grommet you need. You only use ONE depending on the size of the valve stem hole in the wheel..
  • Material - The main part of the valve stems are made of nickel plated brass and the rubber grommets are made of EPDM rubber, making them resistant to rust and corrosion. Vaincre metal valve stems are tough enough to withstand inclement weather or long road trips..
  • Specifications - 4 pack TR416 metal valve stems, 1 1/2" inch Effective Length, maximum air pressure is 200 PSI. Complete size is 1.7" L x 0.75" W..
  • Standard Auto Metal Valve Stems - The valve stems are easy to install. Replace your valve stem whenever you get new tires to help ensure long tire life, provding safety driving..
Check Stock

Apache 10031564 Multipurpose Hose – Black 1/2 in x 25 ft Agriculture Hose with EPDM Tube Cover 200 PSI Reinforced Air Water Hose

  • AGRICULTURE HOSE: This hose is manufactured for carrying out varied air and water applications.
  • it is designed to spray different chemicals at a....
  • EPDM TUBE: Boasting a durable construction, this agriculture hose is designed using specially formulated EPDM tube and cover with the complete suction....
  • DURABLE CONSTRUCTION: This ergonomically designed versatile hose is manufactured with the finest and durable material, inclusive of EPDM cover that....
  • APPLICATIONS: This air hose is a smart choice for carrying gases for heating or cooling applications. Use this hose for water, air, and other....
  • PRODUCT SPECIFICATIONS: Apache multipurpose hose has ½ in. inner diameter and 0.81 in. outer diameter, with a temperature range between -40°F to....
Check Stock

Gates 19070 Premium Molded Heater Hose

  • Has all the quality features of Gates molded coolant hose and similar to OEM specifications.
  • Engineered to resist electrochemical degradation – the leading cause of hose failure.
  • EPDM tube, synthetic fiber knit reinforcement, EPDM cover.
  • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications.
  • Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C).
Check Stock

Gates 20475 Premium Molded Coolant Hose

  • Specifically-engineered materials resist collapse under vacuum.
  • Engineered to resist electrochemical degradation, the leading cause of hose failure.
  • Pre-shaped to fit and to ensure perfectly sealed conditions.
  • heat-, ozone- and chemical coolant-resistant EPDM cover.
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances).
Check Stock

Gates-22917 Hose

  • Specifically-engineered materials resist collapse under vacuum.
  • Engineered to resist electrochemical degradation, the leading cause of hose failure.
  • Pre-shaped to fit and to ensure perfectly sealed conditions.
  • heat-, ozone- and chemical coolant-resistant EPDM cover.
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances).
Check Stock

Gates 22129 Premium Molded Coolant Hose

  • Specifically-engineered materials resist collapse under vacuum.
  • Engineered to resist electrochemical degradation, the leading cause of hose failure.
  • Pre-shaped to fit and to ensure perfectly sealed conditions.
  • heat-, ozone- and chemical coolant-resistant EPDM cover.
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances).
Check Stock

Gates 23143 Premium Molded Coolant Hose

  • Specifically-engineered materials resist collapse under vacuum.
  • Engineered to resist electrochemical degradation, the leading cause of hose failure.
  • Pre-shaped to fit and to ensure perfectly sealed conditions.
  • heat-, ozone- and chemical coolant-resistant EPDM cover.
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances).
Check Stock

Gates-19193 Hose

  • Has all the quality features of Gates molded coolant hose and similar to OEM specifications.
  • Engineered to resist electrochemical degradation – the leading cause of hose failure.
  • EPDM tube, synthetic fiber knit reinforcement, EPDM cover.
  • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications.
  • Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C).
Check Stock

Gates 23308 Premium Molded Coolant Hose

  • Specifically-engineered materials resist collapse under vacuum.
  • Engineered to resist electrochemical degradation, the leading cause of hose failure.
  • Pre-shaped to fit and to ensure perfectly sealed conditions.
  • heat-, ozone- and chemical coolant-resistant EPDM cover.
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances).
Check Stock

Gates 20603 Premium Molded Coolant Hose

  • Specifically-engineered materials resist collapse under vacuum.
  • Engineered to resist electrochemical degradation, the leading cause of hose failure.
  • Pre-shaped to fit and to ensure perfectly sealed conditions.
  • heat-, ozone- and chemical coolant-resistant EPDM cover.
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances).
Check Stock