Top Epdm Nbr Pvc Extruder

hygger Pond Liner Seam Tape, Self Adhesive Double Sided EPDM Liner Repair Tape, Cover Strip for Patch Holes and Cracks, Black (3' x 30')

  • DOUBLE SIDED SELF-ADHESIVE DESIGN: The self-adhesive design is convenient, you only need to clean up the need to be sealed areas keep the surface dry, then tear the product and apply it to the seam area, press to make it fit completely, leave for several hours after the seamed..
  • HIGH PERFORMANCE: This pond liner seam tape is made of high performance double sided butyl based sealant, used to form a moisture and airtight seal so ideal for sealing / repairing pond liners and roofing plastics..
  • DIY YOUR POND: This pond liner seaming tape will allow you to connect and seal two or more pieces of PVC or EPDM liner together to create a bigger pond. This durable seaming tape is safe for fish and plants..
  • APPLICATION: Ideal for EPDM, PVC, polypropylene and polypropylene liner materials. Use this waterproof adhesive to connect pond underlayment as well..
  • WHAT YOU GET: 1* pond liner joining Tape. Our 24 hours friendly customer service for peace of mind..
Check Stock

Creality Official Upgrade Extruder MK8 Extruder Alloy Block Bowden Extruder 1.75mm Filament for Ender 3 Series Ender 5/5 Plus/Pro CR-10 Series 3D Printer

  • COMPATIBILITY--- All Metal MK-8 Extruder Feeder Drive 1.75mm Filament. It makes loading the filament easier and smoother, with no worries about....
  • UPGRADE METAL EXTRUDER---The upgrade Creality3D silver metal Bowden extruder is an update for the plastic extruder. Upgrade your Creality 3D Printer....
  • WORK BETTER--- the extruder drive has better stronger pressure pushing the filament into the printer nozzle and so will improve the printers'....
  • EASY TO ASSEMBLE--- Our metal extruder kit includes all the necessary screws & parts needed, it can directly replace your old original fragile plastic....
  • OFFICIAL HIGH QUALITY--- Full metal aluminum alloy material makes our extruder kit more stable and durable. And it has stronger pressure pushing the....
Check Stock

Official Creality 3D Extruder Feeder Drive MK-8 Aluminum Upgraded 1.75mm for CR-10 Ender 3 CR-10S (Black)

  • 【Upgrade Black Extruder】All Metal MK-8 Extruder Feeder Drive 1.75mm Filament. It makes loading the filament easier and smoother, with no worries about filament scraping or breaking. This extruder feeder drive is compatible with nearly all models of 3D printers. No need to change stepper motors or other mounting hardware..
  • 【Wide Application】The upgrade Creality3D silver metal Bowden extruder is compatible with nearly all models of 3D printers(Ender 3/3 Pro, Ender 3 V2, Ender 3 Max, Ender 5/5 Plus/5 Pro, CR-10, CR-10 V2, CR-10 Max, CR-10 S4, CR-10 S5, CR-10S, CR-10 Plus, CR-X, CR 20/20 Pro). No need to change stepper motors or other mounting hardware..
  • 【Very Easy to Install】 Unbolt the old original Creality plastic extruder & screw in the new Metal Extruder and ready to start printing. Our metal extruder kit comes with an instruction on how to put it together, which makes it easier to install. Used for 1.75mm filament of 3D printer MK8 Bowden extruder frame.
  • 【Durable】 All-metal aluminum alloy, DIY aluminum block and you need to be assembled by yourself. Giving a much smoother travel and print quality. Fits a 1.75mm filament..
  • 【Official Creality Original Quality】This high-quality all-aluminum construction is guaranteed to last for years,....
Check Stock

Pipe Ins,EPDM,4-1/2 in. ID,6 ft.

  • Price For: Each Approx. K Value: 0.23 Insulation Type: Elastomeric Item: Pipe Insulation Length: 6 ft. Material: NBR/PVC Based Elastomeric Color: Black For Iron Pipe Size: 1-1/2" Temp. Range: -70 Degrees to 220 Degrees F Wall Thickness: 3/4" Approx. R Value: 4.8 Country of Origin (subject to change): United States.
Check Stock

3/4\ x 6 ft. Polyethylene Pipe Insulation, 1/2\ Wall

  • Price For: Each Approx. K Value: 0.23 Insulation Type: Elastomeric Item: Pipe Insulation Length: 6 ft. Material: NBR/PVC Based Elastomeric Color: Black For Iron Pipe Size: 1/2" Temp. Range: -70 Degrees to 220 Degrees F Approx. R Value: 5.4 Wall Thickness: 3/4" Country of Origin (subject to change): United States.
Check Stock

2 x 6 ft Elastomeric Pipe Insulation 3/4 Wall

  • Price For: Each Approx. K Value: 0.23 Insulation Type: Elastomeric Item: Pipe Insulation Length: 6 ft. Material: NBR/PVC Based Elastomeric Color: Black For Iron Pipe Size: 1-1/2" Temp. Range: -70 Degrees to 220 Degrees F Wall Thickness: 3/4" Approx. R Value: 4.8 Country of Origin (subject to change): United States.
Check Stock

Bowden Extruder V2.1 RNC Nano Coated Gear DDB Universal Geared Extruder for 3D Printer

  • Kit includes: 1pc Universal Geared Extruder w/ RNC Nano Coated Gear, 1pc Screws package, 1pc Installation tools package, 1pc Stepper motor mounting bracket.
  • Upgraded High performance extruder for 3D Printer.
  • Upgrade Highlights: 1. The position of the gears and the accuracy of all screw holes are calibrated. 2. Modified the new buckle, both sides of the V2.1 version of the DDB extruder support filament running thru in and out (it has no specified direction, and you are able to use either side of the material ports).
  • 3. The filament has an independent motion cabin inside the extruder. The new white filament guide inside the extruder is helping the filament running smoothly. 4. The new outer shell design with edge cut on the top of the extruder is reserved for the screw rod of Ender 3 printer. 5. Upgraded shell using new mixed materials.
  • ***Please make sure Gears are Installed and Precisely Aligned before printing, they will perform successfully.
Check Stock

Official 3D Printer Extruder Upgraded Aluminum Drive Feed Extruders Accessories for 3D Printer 1.75mm Filament Works with Creality CR-10 Series Ender 5 Series Ender 3 Series

  • ✔️Durable Material -- High quality aluminum alloy material and sandblast to surface oxidization, ensuring this red extruder is last for long term....
  • ✔️New Upgraded Design -- The upgraded red extruder has removed pneumatic joint so as to increase gear density, preventing the joint fracture....
  • ✔️Improved Performance -- The optimized extruder with metal extrusion and original hot-end kit pushes the filament into printer nozzle, greatly....
  • ✔️Install Easily -- You just remove the old Creality extruder & screw and then install the new red extruder. All the necessary accessories are....
  • ✔️Wide Compatibility -- Red extruder is suitable for Creality 3d printers accessories: Ender-3 series, Ender-5 series, CR-10S, CR-10, CR-10mini,....
Check Stock

5Aplusreprap Upgraded Dual Gear Extruder Single Connector for Creality Ender 3 CR10 / Pro CR-10S 3D Printer 1.75mm Filament (2 x Extra Gears), Right Hand

  • Package Include: Single connector upgraded dual gear extruder right-handed 1 Set - extruder aluminum block DIY kit with 4pcs quality stainless steel gears.
  • Main Material Instruction: Material for extruder: Aluminum Alloy . Material for the gear in extruder kit : Stainless Steel. For filament: 1.75mm.
  • Advantages: This is an upgraded version of CR10 extruder. A newly added extrusion wheel makes the filament feed more stable. The design of the double-concave gear also reduces the embossing of the consumables by the extrusion wheel..
  • Features: The mould steel spring is very rigid, strong in pressure and very durable..
  • Tips: For most Ender/CR Series 3D Printers, please choose the right-handed extruder..
Check Stock

Redrex Ender 3 Extruder Bowden Aluminum Upgraded with 40 Teeth MK8 Drive Gear Kit Compatible with Creality Ender 3V2 /Ender 3 Pro/CR-10 Series and Other Reprap Prusa 3D Printers [Right Hand]

  • 【Application】:This metal extruder is compatible with Creality Ender 3 V2,Ender 3 Pro,Ender 3,CR-10,CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10....
  • 【Direct Drive Extruder】:The upgrade extruder supports direct extrusion.A direct drive extruder improves extrusion and retraction by removing the....
  • 【Filament】：The extruder feeder supports PLA/ABS/Wood/Hips/Flexible/PTEG,with 40 teeth drive gear feeds the 1.75mm filament very smoothy..
  • 【Durable Feeder】:The extruder feeder is made of heavy-duty aluminum alloy material,which is more durable and stable than the plastic one..
Check Stock

SanSanYa Pond Liner Seam Tape EPDM Liner Seam Tape Self Adhesive Double Sided Liner Repair Tape Pond Liner Tape for Pond Liner Splicing, Patch Holes and Cracks (1.97' x 65.62')

  • 【DIY Your Pond】: Using this pond liner sealing tape allows you to join and seal two or more pieces of PVC or EPDM pond liner together, meeting the needs of your large pond..
  • 【Double Sided Strong Adhesive】: Our pond liner seam tape is designed with double-sided self-adhesive, simply clean the area to be sealed to keep the surface dry, then peel off the product and apply it to the seam area, pressing to make a perfect fit..
  • 【Widely Application】: The double sided liner repair tape is suitable for PVC, EPDM, polypropylene and polypropylene lining materials, a good ideal to have this tape if you want to creat your own ponds..
  • 【Good Performance】: The pond liner seam tape is made of quality double sided butyl sealant features good anti-moisture and air tight seal, great for sealing or repairing pond liners..
  • 【Package Included】: You'll receive one roll 1.97" x 65.62' / 5cm x 20m pond liner seam tape..
Check Stock

Amazon Basics Standard Jump Rope, Grey

  • Standard jump rope for quickly integrating high-intensity cardio training into any workout.
  • Increases the heart rate, burns calories, enhances coordination, and tones legs, glutes, shoulders, arms, and core.
  • Length can be easily adjusted to accommodate different users.
  • ball-bearing handles made of PVC and comfortable NBR foam.
  • Measures 110 inches long by 2.2 inches in diameter.
  • backed by an Amazon Basics 1-year limited warranty.
Check Stock