Top Equal Angle Steel Bar
Valhalla Custom Kydex Sheath Ka-bar Becker BK9 COYOTE BROWN One Piece
- Knife Made in the USA, Sheath made in Taiwan.
Check StockAccusize Industrial Tools 3/8'' by 4.33'' Right-Hand Sclcr Coolant Through Indexable Boring Bar with Ccmt Insert 21.51, 2800-0035
- General purpose boring bar fitted with rhomboidal positive inserts (80°angle) which are free cutting with strong cutting edges..
- The coolant hole with a diameter range varying between 3/32" and 5/32" in accordance to the bar size allows to cool the cutting edge and remove chips..
- The inserts is set with a 0° rake angle and an inclination angle shown in the table below..
- Made of tool steel with nitrogen superficial treatment, Hardness 60 HRC, blackening by PVD coating, thickness 0.0002"..
- Extreme gloss finish, Bar hardness approximately 45HRC.
Check StockRIMKOLO Pry Bar Set,5-Piece Heavy Duty Pry Bar with Thicker Strike Caps,4-Piece with Angled Tip and 1-Piece with Straight Tip
- 【APPLY TO ANY SPACE】: Sharp angle tip, easy to enter the narrow gap. The combination of angle head and straight head is more convenient and widely used..
- 【WITH STRIKE CAP】: Ergonomic handle, comfortable and antiskid. The end of the handle is provided with a strike cap, which allows the pry bar to be struck into place with a hammer..
- 【SOLID】: Made of high-quality chrome vanadium steel, which is harder after heat treatment and not easy to distort and deform. The crowbar with proper proportion length is more labor-saving..
- 【DURABLE】: The pry bar surface is protected by black oxide film, Anti corrosion and anti rust, extending service life. Thicker crowbar, stronger and more durable..
- 【5-PIECE PRY BAR SET】: 4x Angle head pry bar: 8" 12" 18" and 24.
Check StockMoen R8732P Home Care Bathroom Safety 32-Inch Grab Bar with Concealed Screws, Peened, Stainless
- Able to support up to 500 lbs of pull force to provide a stable, with knurled textured anti-slip grip, reliable handhold.
- Made of stainless steel for a lasting strength and quality..
- Concealed secure mount design allows for easy, secure installation at any angle, allows you to cover any unsightly screw holes and continue a clean, sleek trend to your bath and shower..
- Use iMomwee 24 inch anti-slip safety grab bars in commercial and residential places as in the bathroom, kitchen, along stairways, swimming pool, laundry room,toilet, bathtub and shower safety grab Handrails for additional fall prevention, especially for the handicap, elderly, disabled, pregnant women and children. Not only apply to use as bath shower grab bar, but also can hold clothing,towel and etc..
- The total length is 24 inch. 1.25 inch bar diameter allows enough space to easily grip bar for added support.
- Anti-slip grab bar is made of durable stainless steel construction. It's a good choice for anywhere you need a helping hand to balance you..
- iMomwee 24-Inch Concealed Mount Safety Bath and Shower Grab Bars backed with 3 Years of Free Replacement Warranty. These 24in grab bars can be permanently used once it's properly installed..
- iMomwee 24 inch chrome finished anti-slip shower gra....
Check StockKES Hand Shower Slide Bar Stainless Steel with Height Adjustable Shower Head Holder Wall Mounted Polished Chrome, F200-CH
- Universal Shower Holder: Shower holder has two openings of different sizes: 21mm and 19mm. 21mm opening should be face up. Our shower holder is compatible with 95% shower heads. Please remember to check if the opening is upside down in case your shower does not fit..
- Stainless Steel Bar: Sliding bar is made of Stainless Steel, durable and rust-proof. Extra thick bar will not bent nor dent from day to day use..
- Adjustable Bracket: Engineering Grade ABS Material Shower Bracket, allows you to adjust any height or angle of handheld shower head after installation. Shower height and angle can be easily adjusted to accommodate both kids and adults, providing perfect shower experience for every family member..
- Quality Finish: Industry-leading multi-layer finish, build to resist daily scratches, corrosion and tarnishing..
- Installation Instruction Included: Packages include sliding bar, shower holder, hardware pack and detailed installation guide. Wall mounting installation. NOTE: Shower head and shower hose are not included. If you need those, please search for B00KNJUL70..
Check StockABN Adjustable Pry Bar Set Heavy Duty 11-Point Indexing Pry Bar Set Automotive Pry Bar 3pc Kit – 8in, 12in, 16in
- ...| Pry Tool Indexable Pry Bar Kit 3-Piece Set to remove engine and axle drive seals, pull diesel injectors, position engines, align steel components, and reposition equipment.
- Each automotive pry bar tool has a full 180-degree indexable head swing that you can set to 1 of 11 different locking positions for the right angle and leverage to access hard-to-reach spots.
- Simply push down button on head and turn claw to angle.
- BUILT TO LAST: Constructed with a strong locking device on index and full chrome-vanadium steel (CR-V) body with a manganese phosphate finish for maximum strength and longevity that resists rust and corrosion.
- Adjustable prybar tool set meets or exceeds ANSI specifications.
- GRIP COMFORTABLY: Ergonomic thermoplastic rubber (TPR) handle on each auto pry bar allows for maximum grip and leverage with less user fatigue and more productivity.
- EASY STORAGE: Heavy-duty 17.5” x 2.4” x 8.2” inch (44.5cm x 6.1cm x 20.8cm) plastic blow-molded carrying case with latches and built-in handle for easy transportation, safe storage, and quick organization.
- PACKAGE CONTENTS: Pry bars heavy duty flat bar tool kit includes (3) adjustable and indexable angle pry bars (8”, 12”, 16” inch) and (1) carrying case.
- Varied handle lengths allow for perfect ....
Check StockStainless Steel t Square, Incra T Rule, Edge Ruler Woodworking, Compass and Protractor Set, Multi-Function Angle Measure Tool with Wall Hanging Storage Rack(18-INCH)
- ...teel ball to lock the angle firmly during the painting lines.
- Any angle can be obtained by moving and rotating the ruler. The ruler has a total length of 18in, and the smallest scale is accurate to 1/32in. There are 144 serrated notches and 18 circular holes, The spacing of the serrations is 11/112in (approximately equal to 2.49 mm) and that of the round holes is 1in.
- MATERIAL:The dial of this adjustable woodworkers edge rule is made of hard plastic, both the angle finder and ruler body are made of stainless steel, which is moisture-proof, rust-proof and corrosion-resistant. The laser scale is clear and precise, does not fade, and effectively extends its service life.
- T-SHAPED DESIGN: this angle measure tool is designed with t-shape, a series of precision-machined index holes and the spring-type, close-tolerance indexing pins engaged with it.
- The pin snaps into place, so you can make sure that its positioning is accurate.
- CONVENIENT STORAGE:Each woodworking ruler is equipped with a wall-mounted storage rack, which make it easy to store. Woodworking protractors & ruler is an indispensable tool for every woodworkers a....
Check StockBosch GTL3 65ft Square Laser Level for Tile and Square Layout
- ...teel ball to lock the angle firmly during the painting lines.
- Any angle can be obtained by moving and rotating the ruler. The ruler has a total length of 13in, and the smallest scale is accurate to 1/32in. There are 104 serrated notches and 13 circular holes, The spacing of the serrations is 11/112in (approximately equal to 2.49 mm) and that of the round holes is 1in.
- SIMPLE OPERATION: You can make the cross surface of the disc next to the edge of the board, then turn the ruler to get the angle you want. Adjust the nut to get the best feel. Place the tip of the pencil in the saw tooth notch and then move the ruler along the edge of the board to get different parallel lines. In short, you can draw any line you want with this ruler.
- HIGH QUALITY: The dial of this adjustable woodworkers edge rule is made of hard plastic, both the angle finder and ruler body are made of stainless steel, which is moisture-proof, rust-proof and corrosion-resistant. The laser scale is clear and precise, does not fade, and effectively extends its service life.
- AFTER-SALES SERVICE: If you have any questions after receiving the goods, please contact us as soon as possible, we will provide you with good after-sales service. If the product is defective, please contact us to return ....
Check StockYG-1 P15202 Spade Drill Straight Shank Holder, Straight Flute, 0.318\ Shank Diameter, 31/32\-1-3/8\ Drill Insert Range
- ... boring and milling CNC machine tools. It can be used for boring, boring outer circle, boring end face, boring stepped hole, boring inner hole end face, cutting inner hole and ring groove on outer circle, etc..
- ☞Precise control and free adjustment: The scale of the dial is clear, and the circle is divided into 100 equal parts. The movement of each scale is 0.005mm, the diameter is 0.01mm, and the operation is simple..
- ☞Select material with high hardness. Using 40CrMo material, it has strong rigidity, special surface treatment, high hardness, good seismic performance, suitable for high speed, and guarantees the density of hole processing..
- ☞The boring range of the complete set of boring tools: 10-150mm, and the diameter of the boring tool bar is 50mm. Precision fine-tuning: 0.01mm (one revolution of 0.02mm), adjustable stroke 20mm. The boring bar easily and directly enters the boring head hole..
- ☞The refined boring bar is made of alloy steel, which has strength and toughness, good hardenability, and no obvious temper brittleness. After quenching and tempering, it has obvious impact resistance. The taper design of the bar increases the anti-vibration capability of the boring bar..
Check StockShrewd SMAVB1ATLASMBK Atlas V-Bar Matte Black Single Archery Bow Stabilizer
- Packaged includes:1pc Strbee V Shaped Bar + 1pc snap hook.
- Strbee V Shaped Bar:13"x8.5"x3" (LxWxH) Perfect dimension provides comfort during your workout, fit well in your palm,Convenient to use at home gyms during the pandemic..
- UNIVERSAL DESIGN:Designed for all cable systems. Strbee V Shaped Bar Support up to 880 lbs (400 kg). Stainless Steel Spring Snap Hook Carabiner - 304 Stainless Steel Clips Support up to 300 lbs (136 kg),0.63" extra-large hanging hole with support for 2 stainless steel spring buckles..
- Rainbow Color:High quality solid steel, with a special surface anti-rust treatment, with angle-changeable rainbow color..
- Warranty:60 days free return or exchange, 1 year limited warranty..
Check StockBalanceFrom Foldable Heavy Duty 300 lbs Capacity Inversion Table with Removable Shoulder Rest and Lumbar Support
- Safety - The triangle structure design and the steel frame make the inversion table extremely stable and safe. A safety strap is included for added protection.
- Lock - Easy reach locking system for convenience and safety. Support up to 300 lbs. Ergonomic handle bars are covered by foam, easy to return to upright position.
- 3 lockable angle adjustable cross bar - 3 lockable angle position adjustable rear cross bar for easy inversion angle adjustment, 2 non-lockable angles.
- Dimension: 32"W x 44"L x 80"H. Foldable for easy storage.
- 2 Styles - With regular lumbar support, and with Heat & Massage lumbar support. 3 levels for heat 3 levels for massage.
Check StockCocoweb 2-Pack HL-58BK | C-Lock Heavy Duty Locking 5/8 Inch Hitch Pin - Black
- DUAL FUNCTIONALITY: Use for added security, decreasing the chances of intruders entering your home.
- RUGGED CONSTRUCTION: 20 gauge steel body withstands more than 350 pounds of force.
- ADJUSTABLE: Forty Height Settings, each 1/4.
- SECURITY: A Pivoting Ball Joint re-angles the bar to any position for maximum reinforcement.
- AFFORDABLE: Same Protection, Low Price, provides equal protection at a competitive price.
Check Stock