Top Esp8266 Wifi Module

YLKOVA ESP8266 Programmable Development Board WiFi Test Tool ESP8266 WiFi Deauther Watch DSTIKE NodeMCU Built in 500mAh | Wearable | OLED | Attack/Control/Test Tool | Battery with OLED Display

  • ⌚【YLKOVA WATCH】It is an ESP8266 development board, but you can wear it like a smartwatch, more convenient. Note:This project is a proof of concept for testing and educational purposes. Neither the ESP8266, nor its SDK was meant or built for such purposes..
  • ⌚【LONG WORKING TIME】Built-in an 500mAh lithium battery, Only 80mA power usage, working time up to 3-4 hours. Comes with OLED display..
  • ⌚【WIFI TESTING TOOL】This ESP8266 development board is installed with the latest ESP8266 Deauther software. With this software, you can perform different secure tests for your WiFi networks..
  • ⌚【EXTENSION BOARD】You can use it to develop your own software. It is indeed a ESP8266 development board and easy to operate. NOTE: ESP8266 supports 2.4GHz only..
  • ⌚【DISCLAIMER】This project is a proof of concept for testing and educational purposes. Neither the ESP8266, nor its SDK was meant or built for such purposes. Bugs can occur! Use it only against your own networks and devices! Please check the legal regulations in your country before using it. We don't take any responsibility for what you do with this program..
Check Stock

AITRIP 5PCS D1 Mini Pro 16MB ESP8266 ESP-8266EX CP2104 WiFi External Antenna Connector Micro USB Serial Converter IoT Development Board PWM/12C/1-Wire Compatible with Arduino

  • D1 Mini Pro is a mini WiFi board with 16MB(128M bit) flash, external antenna connector and built-in ceramic antenna based on ESP-8266EX. It offers a complete and self-contained WiFi networking solution..
  • External antenna connector；Built-in ceramic antenna.
  • The ESP8266 is an all-rounder and a very popular WiFi enabled micro-controller. AITRIP D1 Mini Pro is very similar to the traditional D1 Mini. However, this latest version has been fundamentally revised.
  • The ESP2866 D1 Mini Pro is smaller and lighter.
  • Same size as D1 mini, but more light，Compatible withMicroPython and NodeMCU.
  • The D1 Mini Pro module has 11 digital I/O pins and all pins support interrupt/ pwm/ I2C/ 1 wire/ 1 analogue input (3.2 maximum input). It stands out for having an external antenna connector..
Check Stock

MakerFocus WiFi Test Tool ESP8266 WiFi Deauther Watch V3 DSTIKE NodeMCU ESP8266 Programmable Development Board Built in 800mAh Battery with OLED Dispaly, Wristband and 3D Printing Case

  • Product operation link, available in the product guide and documentation.It is an ESP8266 development board, but you can wear it like a smartwatch, more convenient.
  • Wifi Testing Tool: This esp8266 dev board is installed with the latest ESP8266 Deauther software. With this software, you can perform different secure tests for your WiFi networks. NOTE: ESP8266 only supports 2.4GHz.
  • Extension Board: You can use it to develop your own software. It is indeed a ESP8266 development board and easy to operate.
  • Long Working Time: Built-in an 800mAh lithium battery, working time up to 8-10 hours.
  • Usage: Using it only for testing and educational purposes against your own devices! Never use it to do harm or create damage!.
Check Stock

Arduino | Step by Step: The Ultimate Beginner’s Guide with Basics on Hardware, Software, Programming & DIY Projects (Arduino | Introduction and Projects Book 1)

  • ... biggest & most advanced starter kit for Arduino. 65+ pieces w/ FIVE main boards: 100% Arduino-compatible Uno R3, Mega 2560, Nano V3, ESP32 WiFi+Bluetooth and ESP8266 NodeMCU development platforms.
  • Explore programming electronics with all of the most common sensors and modules in Arduino like RFID Card-Key Reader, Ultrasonic Sensor, Real Time Clock, Impact Switch, 3-Axis Accelerometer, LCD, Relay, Servo and Stepper Motor - suitable for beginner or advanced users.
  • Build wireless IoT Automation projects with ESP32 Development Board, HC-05 Bluetooth Module, ESP8266 Wi-Fi Module, 2x NRF24L01 Wireless Transceivers and the W5100 Ethernet Shield.
  • All-in-one bundle with extra accessories + 16G USB storage with free access to the GAR Dropbox Cloud including PDF guides & links to tutorials and videos to help you learn to program all the parts and get started quickly.
  • Effective technical/customer support from USA with lifetime replacement guarantee on all parts – The Monster comes in 16" x 12" durable organizer tool box for safe transport and storage. No soldering req....
Check Stock

MakerFocus WiFi Test Tool ESP8266 WiFi Deauther Watch DSTIKE NodeMCU ESP8266 Programmable Development Board Built in 500mAh Battery with OLED Dispaly, Wristband and 3D Printing Case

  • Deauther Watch: It is an ESP8266 development board, but you can wear it like a smartwatch, more convenient. NOTE: Using it only for testing and educational purposes against your own devices!.
  • Wifi Testing Tool: This esp8266 dev board is installed with the latest ESP8266 Deauther software. With this software, you can perform different secure tests for your WiFi networks. NOTE: ESP8266 supports 2.4GHz only.
  • Long Working Time: Built-in an 500mAh lithium battery, working time up to 7 hours. Comes with OLED display and a 3 way momentary slide switch.
  • Extension Board: You can use it to develop your own software. It is indeed a ESP8266 development board and easy to operate.
  • Disclaimer: This is a tool. It's neither good nor bad. Use it to do good, to study and to test. Never use it to do harm or create damage! Use it only for testing and educational purposes against your own devices! I don't take responsibility for what you do with it. Please check the legal regulations for your country to make sure you don't violate any laws.
Check Stock

MakerFocus WiFi Test Tool ESP8266 WiFi Deauther Watch V2 DSTIKE NodeMCU ESP8266 Programmable Development Board Built in 800mAh Battery with OLED Dispaly, Wristband and 3D Printing Case

  • Deauther Watch: It is an ESP8266 development board, but you can wear it like a smartwatch, more convenient. The link to the code and video is obtained in the product description.
  • Wifi Tes ting Tool: This esp8266 dev board is installed with the latest ESP8266 Deauther software. With this software, you can perform different secure tests for your WiFi networks. NOTE: ESP8266 supports 2.4GHz only!.
  • Extension Board: You can use it to develop your own software. It is indeed a ESP8266 development board and easy to operate..
  • Long Working Time: Built-in an 800mAh lithium battery, working time up to 8-10 hours. Comes with OLED display and a 3 way momentary slide switch..
  • Disclaimer: This is a tool. It's neither good nor bad. Use it to do good, to study and to test. Never use it to do harm or create damage! Use it only for testing and educational purposes against your own devices! I don't take responsibility for what you do with it. Please check the legal regulations for your country to make sure you don't violate any laws..
Check Stock

DORHEA ESP8266 Code Burner Reflash Firmware Downloader CP2102 Test Board Code Burner Flash Downloade Compatible with ESP8266 ESP-01S/01 ESP-07/07S ESP-12E/12F/12S/F

  • ESP8266 test frame burner development board work Voltage: DC 5V.
  • The board supports firmware one-click download function and adds programming.
  • Micro USB interface, this module is very easy to program..
  • The ESP8266 test board code burner flash downloader compatible with ESP-01 ESP-01S ESP-07 ESP-07S ESP-12E ESP-12F ESP-12S ESP-F..
  • ESP8266 code burner firmware downloader all IO ports have been drawn out and can be used as minimum system development board or small batch burning fixture..
Check Stock

HiLetgo 2pcs ESP8266 NodeMCU CP2102 ESP-12E Development Board Open Source Serial Module (Pack of 2PCS)

  • ESP8266 CP2102 NodeMCU LUA ESP-12E WIFI Serial Wireless Module.
  • Built-in Micro-USB, with flash and reset switches, easy to program.
  • Arduino compatible, works great with the latest Arduino IDE/Mongoose IoT/Micropython.
  • Data download access to the website: http://www.nodemcu.com.
Check Stock

5 Pieces I2C Display Module 0.91 Inch I2C OLED Display Module Blue I2C OLED Screen Driver DC 3.3V~5V(Blue Display Color)

  • What will you get: there are 5 pieces OLED display module with blue display color, self-illuminated and no need backlight.
  • Power-saving display: the I2c oled display performs better than the traditional LCD display and with lower consumption sicne the IIC (I2C communications) simplifies connections.
  • Please note that these I2C OLED display module comes without pin headers.
  • More details: use compatible with Arduino, ESP8266, ESP32, STM32, etc..
  • Good compatibility: this i2c oled display module is compatitable with Raspberry Pi 4B/3B+/3B/2B/Zero, compatitable with Arduino, also compatitable for ESP8266, ESP32, STM32, etc..
  • Product manual: as shown in the instructions.
Check Stock

JM Set of 3 pcs Transparent 3D Floating Frame Display Holder/Box/Frames for Challenge Coins, AA Medallions, Antique, Jewelry,Gift, White, 2.75 x 2.75 x 0.75 Inches

  • What will you get: there are 5 pieces OLED display module with classic display color, self-illuminated and no need backlight.
  • Power-saving display: the I2C oled display performs better than the traditional LCD display and with lower consumption the IIC (I2C communications) simplifies connections.
  • Please note that these I2C OLED display module comes without pin headers.
  • More details: use compatible with Arduino, ESP8266, ESP32, STM32, etc..
  • Good compatibility: this i2c oled display module is compatible with Raspberry Pi 4B/3B+/3B/2B/Zero, compatible with Arduino, also compatible with ESP8266, ESP32, STM32, etc..
  • Product manual: as shown in the instructions.
Check Stock

AURSINC WiFi Deauther Watch V3 ESP8266 Programmable Development Board | Wearable Smartwatch | OLED&Laser | Attack/Control/Test Tool|LOT for DSTIKE NodeMCU

  • ORIGIN DSTIKE Watch V3, with better performance and appearance than V1&V2, is wrapped by the Arcylic cover and 3D print transparent case, moreover, equiped with upgraded software system, which is easier to operate..
  • WiFi Test Tool: installed with the latest ESP8266 Deauther software, the deauther watch can perform different secure tests for your WiFi networks, equiped with 5dB FPC antenna. NOTE: ESP8266 supports 2.4GHz only..
  • Extensible: Deauther wathch V3 also can be used to develop your own software, it is indeed a ESP8266 development board, easy to operate..
  • LONG WORKING TIME: DSTIKE Deauther watch has a built-in an 800mAh battery, the maximum working time of the WiFi Deauther wristband reaches 8 hours, also the battery can be charged while in use. Moreover, the watch is equiped with OLED display and a 3-way momentary slide switch..
  • NOTE: the wifi deauther watch can be used only for testing and educational purposes on your own devices! Firmware and Software download please refer to the below description..
Check Stock

HiLetgo 3pcs ESP8266 NodeMCU CP2102 ESP-12E Development Board Open Source Serial Module Works Great for Arduino IDE/Micropython (Large)

  • ESP8266 CP2102 NodeMCU LUA ESP-12E WIFI Serial Wireless Module.
  • Built-in Micro-USB, with flash and reset switches, easy to program.
  • Arduino compatible, works great with the latest Arduino IDE/Mongoose IoT/Micropython.
Check Stock