Top Esun Pla Pro 75mm

Inland Clear PLA/PLA PRO (PLA+) 3D Printer Filament Reusable Spool, for Inland PLA/PLA PRO (PLA+) Refill only

  • 1.75mm 2.85mm filament PLA PRO PLA+ spooless refill 3d printer 1kg 2.2lbs spool+P3:U6.
  • Outer diameter 200mm, bore diameter 52mm, hub diameter 92mm, width diameter 54mm.
  • Does not come with Filament. Works with Inland 1KG 1.75MM PLA/PLA PRO (PLA+) Filament.
Check Stock

eSUN 1.75mm Glass Lemon Yellow PLA 3D Printer Filament 1kg Spool (2.2lbs), Glass Yellow

  • 1KG net (apximately 2.2 lbs) Filament with Clear Spool.
  • eSUN PLA 3D Printer Filament Vacuumed Sealed With Desiccant.
  • 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm).
  • Recommended Extrusion/Nozzle Temperature 200C - 220C.
  • Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.05" - Inner Circle Diameter: 3.5".
Check Stock

eSUN 1.75mm Glass Light Blue PLA 3D Printer Filament 1kg Spool (2.2lbs), Glass Blue

  • 1KG net (apximately 2.2 lbs) Filament with Clear Spool.
  • eSUN PLA 3D Printer Filament Vacuumed Sealed With Desiccant.
  • 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm).
  • Recommended Extrusion/Nozzle Temperature 200C - 220C.
  • Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.05" - Inner Circle Diameter: 3.5".
Check Stock

eSUN Gloss PLA Filament 1.75mm, Silk Shinny 3D Printer PLA Filament, 1KG Spool 3D Printing Filament for 3D Printers, Red

  • 【Eco-friendly Silk Shinny Gloss PLA】With smooth and bright printed surface, eSUN Gloss PLA has higher toughness than normal PLA and is not easy to break. Supporting structure of it is easy to peel off. Made with starch raw materials derived from renewable plant resources, Gloss PLA is eco-friendly, non-toxic and with low odor..
  • 【Stable Dimensional Tolerance】Minimum tolerance and low warping to ensure consistent feeding and stable prints, good layer bonding, less stringing, no bubbles, easy handling, resulting in an outstanding surface finish and are highly precise..
  • 【Tangle Free & No Plugging】Full 1KG 3D printer filament reel, perfect roundness and very tight diameter tolerance, good winding, does not overlap or tangle. Melt well, feed smoothly and constantly without clogging the nozzle or extruder, high successful printing rate..
  • 【High Compatibility】Printing speed is faster than ABS, PC, PA and other materials, low shrinkage, no deformation, no cracking. eSUN Gloss PLA Filament is compatible with most of FDM 3D printers, widly used in accessory, home decoration, toy, sculpture, shell and COSPLAY..
  • 【Environmental Friendly Package & Reel】Scrap is reused to produce recyclable spool and packaging box. eSUN filament comes in a sealed vacu....
Check Stock

eSUN eSpool Detachable Refilament Reel, Reusable Filament Spool, 2 Pack, 200x65mm

  • ...torage. Compatible with Most of 0.5KG, 0.75KG and 1KG PLA, PETG and other 3D printer spoolless filament..
  • 【Package Includes】2 Pack eSpool in total, each eSpool includes 2pcs round disk and 3pcs cuboid column, come in a packaging bag made of biodegradable PBAT and PLA biological materials. eSpool can be used with eSUN eBOX Dryer Box together, shorten drying time..
Check Stock

PLA Plus PLA+ 3D Printer Filament,Higher Toughness PLA Pro Printing Filament 1.75mm 1kg Spool 2.2lbs Dimensional Accuracy +/- 0.02 mm,Black

  • 【Toughness Enhanced PLA Plus filaments 1.75】JAREES PLA Pro is up to 5 times tougher while retaining all the PLA advantages: excellent adherence,....
  • 【Good Layer Bonding 】Good layer bonding strength make parts stronger. JAREES PLA+ has better overhang properties that leave less stringing on the....
  • 【Vacuum Packing】Vacuum sealed to maintain a low level of moisture content. Please keep it dry and dust-free after after opening the sealed package....
  • 【Recommend Settings】Recommended Extrusion/Nozzle Temperature：195℃-240℃. PLA PRO filament dimensional:1.75mm,accuracy +/-0.02mm,1kg(2.2lbs)..
  • 【100% Satisfactory Service】No matter when or why you need to replace or refund we will help!Each PLA Plus spool comes with 1 quality 200 × 200 mm....
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Olive Green PLA PRO (PLA+) 3D Printer Filament Bundle

  • A 3D Printer accessories combo - 1.75mm Olive Green PLA PRO (PLA+) 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • PLA PRO Filament Specs: Olive Green - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 205°C - 225°C (401°F - 437°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • Why INLAND PLA PRO Filament: Designed with the highest quality and compatibility in mind, Inland PLA+ Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dry and vacuum sealed with desiccant to ensure a high-quality, smooth print.
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Blue PLA PRO (PLA+) 3D Printer Filament Bundle

  • A 3D Printer accessories combo - 1.75mm Blue PLA PRO (PLA+) 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • PLA PRO Filament Specs: Blue - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 205°C - 225°C (401°F - 437°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • Why INLAND PLA PRO Filament: Designed with the highest quality and compatibility in mind, Inland PLA+ Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dry and vacuum sealed with desiccant to ensure a high-quality, smooth print.
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry P....
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Black PLA PRO (PLA+) 3D Printer Filament Bundle

  • A 3D Printer accessories combo - 1.75mm Black PLA PRO (PLA+) 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • PLA PRO Filament Specs: Black - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 205°C - 225°C (401°F - 437°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • Why INLAND PLA PRO Filament: Designed with the highest quality and compatibility in mind, Inland PLA+ Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dry and vacuum sealed with desiccant to ensure a high-quality, smooth print.
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry....
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Gray PLA PRO (PLA+) 3D Printer Filament Bundle

  • A 3D Printer accessories combo - 1.75mm Gray PLA PRO (PLA+) 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • PLA PRO Filament Specs: Gray - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 205°C - 225°C (401°F - 437°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • Why INLAND PLA PRO Filament: Designed with the highest quality and compatibility in mind, Inland PLA+ Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dry and vacuum sealed with desiccant to ensure a high-quality, smooth print.
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry P....
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Dark Blue PLA PRO (PLA+) 3D Printer Filament Bundle

  • A 3D Printer accessories combo - 1.75mm Dark Blue PLA PRO (PLA+) 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • PLA PRO Filament Specs: Dark Blue - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 205°C - 225°C (401°F - 437°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • Why INLAND PLA PRO Filament: Designed with the highest quality and compatibility in mind, Inland PLA+ Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dry and vacuum sealed with desiccant to ensure a high-quality, smooth print.
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any R....
Check Stock

DURAMIC 3D PLA Plus (PLA+) Filament 1.75mm Black 1kg, 3D Printer Filament Tough PLA Pro 8 Times Strength, Cardboard Spool 3D Printing Filament PLA + Dimensional Accuracy 99% +/- 0.03 mm

  • 【Premium & Tough PLA Plus】 Known as the flagship product of Duramic 3D, PLA Plus filaments (PLA+) 1.75mm are made of USA high-purity raw material from Natureworks. Duramic 3D PLA Pro filaments feature 8 times impact strength, which is perfect for printing functional models with higher toughness need..
  • 【Upgraded Cardboard Spool】Duramic 3D Pinter PLA Plus (PLA+) filament 1.75mm has gradually upgraded to cardboard spool along with dual stickers, which allows convenient sorting and full recycling. The filaments remain the same formula and quality..
  • 【Jam-free& Smooth Printing】Duramic 3D PLA plus filament features unique patented Jam-free technology and 100% vacuumed package in resealable with desiccant, which makes no room for clogging and bubbling..
  • 【Wide Options for Color &Color Combination】 Duramic 3D PLA Plus Filament 1.75mm offers not only more than 20 different colors but also nearly 30 color combinations of 2 pack which are more cost-effctive..
  • 【Tangle-free】Duramic 3D PLA Plus Filament 1.75mm are tidily winded with strict quality control, leaving no room for original tangling. And the storage hole is designed to place the tip of filaments to prevent tangling after use..
  • 【Accurate &Consistent Diameter】Diameter: 1.75mm, tolerance 1....
Check Stock