Top Ethernet Communication Module

JacobsParts WT32-ETH01 ESP32 Module Ethernet WiFi Bluetooth Development Board 100Mbps RJ45

  • The issue with the top soldered pins has been resolved, they are now shipping with separate unsoldered pins WT32-ETH01 is an embedded serial to Ethernet module based on the ESP32 series WT32-S1 MCU. The module integrates an optimized TCP/IP protocol stack, which is convenient for users to easily complete the networking functions of embedded devices while reducing development time cost. In addition, the module is compatible with half-pad and through-hole connectors..
  • The board width is a universal width and therefore, it can be directly soldered to boards, connectors, or even breadboards, which is convenient for users to use in different scenarios..
  • ESP32 series IC is an integrated 2.4GHz Wi-Fi and Bluetooth dual-mode SOC, with ultra-high RF performance, stability, versatility and reliability, as well as ultra-low power consumption..
  • ESP32 Module: WT32-S1 240MHz dual core microprocessor 4MB SPI flash memory Oboard 10/100Mbps RJ45 Ethernet (LAN8720A PHY) 802.11n WIFI Bluetooth 4.2.
Check Stock

RPi 3.3V to 5V 26 I/O Bidirectional Voltage-Level Shifter Module for Raspberry Pi, Logic Level Converter

  • Reliable and suitable for a wide range of uses..
  • High conversion efficiency, simple regulating operation..
  • Modbus TCP Ethernet Remote IO Module (8DI+8DO+8AI+RJ45+RS485).
  • The M160T Ethernet Remote I/O Module is an industrial class, isolated designed, high reliability, high stability and high precision data acquisition module,.
  • It provides multi I/O, supports standard Modbus TCP, can be intergraded into SCADA, OPC server, and other automation systems. It is design for working in the harsh industrial application environment, widely used in a variety of industrial automation, monitoring system, automatically measurement and control system..
Check Stock

Honeywell YTH6320R1001 Redlink Wireless Focuspro Thermostat Kit, 2 Packs

  • EQUIPMENT INTERFACE MODULE(EIM): All HVAC equipment is wired to the module. Module receives communication from the wireless devices.
  • RETURN AIR SENSOR: Works with the Equipment Interface Module to maintain safe indoor temperatures if power is lost at the wireless thermostat. Maintains 62 F for heating and 82 F for cooling.
  • REDLINK WIRELESS TECHNOLOGY: Powered by RedLINK reliability. No interference with other wireless devices in the home.
Check Stock

MikroTik RB260GSP

  • MikroTik FiberBox Outdoor Switch with 5-Ports SFP - Includes 1 S-RJ01 Copper Module (CRS105-5S-FB).
  • The Fiberbox is ideal for locations where distance is restricting the use of regular ethernet cables..
  • The device is weatherproof and comes with a hose clamp and zip ties, ready to be installed on high masts and towers..
  • The package also includes the RJ45 SFP (S-RJ01) copper module already preinstalled in the first port, so you can use ethernet in one of the ports already out of the box..
  • If not needed, remove it to have access to all five SFP ports for using with 1.25 Gbit fiber modules..
Check Stock

Heayzoki Power Supply Module for Raspberry Pi 4B / 3B + Ethernet POE Fan Electronic Component,for Raspberry Pi Ethernet POE Fan Power Supply Module

  • This product provides a convenient and cost-effective way to power equipment..
  • This module allows you to apply DC voltage to specific pairs of Ethernet cables so that devices connected to the network can use it as a power source..
  • This module is ideal for any PoE application with limited space, such as IP cameras, biometrics, readers, network audio, etc..
  • For Raspberry Pi Ethernet POE fan power supply module, supports for Raspberry Pi 4B/3B+, provides clean and reliable power supply..
  • With small size, easy to carry and store, convenient to use and with good performance..
Check Stock

Honeywell YTH6320R1001 Wireless Focuspro Thermostat Kit, Programmable Redlink Enabled

  • EQUIPMENT INTERFACE MODULE(EIM): All HVAC equipment is wired to the module. Module receives communication from the wireless devices.
  • RETURN AIR SENSOR: Works with the Equipment Interface Module to maintain safe indoor temperatures if power is lost at the wireless thermostat. Maintains 62 F for heating and 82 F for cooling.
  • REDLINK WIRELESS TECHNOLOGY: Powered by RedLINK reliability. No interference with other wireless devices in the home.
Check Stock

UMLIFE 3PCS 6DOF 6-Axes Sensor Module Gravity Sensor GY-BMI160 Module Accelerometer Gyroscope Acceleration Gravity Sensor IIC I2C 3-5V for Arduino

  • Communication: standard IIC communication protocol.
  • ✹✹This sensor module is a small, 3 a-xis accelerometer and 3 ax-is gyroscope integrated in a single package..
  • ✹✹The BMI160 is a small, low-power, low-noise 16-bit inertial measurement unit designed for use in mobile applications such as augmented reality or inland navigation, which require high-precision, real-time sensor data..
  • ✹✹In full operation mode, with both the accelerometer and gyroscope enabled, allowing always-on applications in battery-powered devices..
  • ✹✹3PCS 6DOF Bosch GY-BMI160 Module 6-axis Acceleration Gyro Gravity Sensor for Arduino.
Check Stock

DIGISHUO Raspberry Pi 4B Model B 2/4/8GB RAM DIY Kit Case Fan SD Card Micro-SD HDMI (8G Module 8 in 1 Kit)

  • 【Raspberry Pi 4 Model B Starter Kit】 Motherboard, New SOC Broadcom BCM2711, quad-core Cortex-A72 (ARM v8) 64-bit at 1.5GHz. Capable of supporting HEVC 4K streams at 60 fps and managing 2 screens in 4K.
  • 【Fastest Raspbery Pi 4 Model B Starter Kit】Dual band 802.11b/g/n/ac WiFi (2.4/5.0 GHz) and Bluetooth 5.0 module. Transfers via 2 USB 3.0 & 2 USB 2.0 ports is faster up to 10 times, 4Gb/s or 500 MB/s. Faster Gigabit Ethernet & Power-over-Ethernet support.
  • 【64GB Class 10 SanDisk Micro SD Card】Use brand new sd card and have no noobs in it you need install system yourself.
  • 【4B Module Cooling Kit】Pi cooling fan with 4 pcs heatsink will make the pi module cooling fast.
  • 【Customized Case】will protect the pi module for well and can also work with 3.5 screen.
  • 【RAM Size Can be Chosen】You can choose 2G or 4G or 8G for your project.
Check Stock

2 Pieces MPU-9250 GY-9250 9-Axis 9 DOF 16 Bit Gyroscope Acceleration Magnetic Sensor I2C SPI 3-Axis Gyroscope Accelerometer Magnetometer Sensor Module

  • Basic information: module model: GY-9250.
  • Power supply: 3-5V (internal low dropout voltage regulator).
  • Communication: standard IIC communication protocol.
  • Internal structure: this module uses the MPU-9250, and combines a 3-axis gyroscope, a 3-axis accelerometer and a 3-axis magnetometer which are integrated into a single QFN package.
  • Reliable chip: the MPU-9250 integrates a 3-axis magnetometer AK8963, which features smaller size compared to previous generation and sensitivity improvement with 0.15 μT/ LSB.
  • The 16-bit AD converter is embedded in the chip, with 16-bit data output.
  • Quality process: the 9-axis sensor module features the immersion gold PCB, which uses the machine welding process to make it work fine.
  • Applications: DTV and set-top boxes are applied to internet connection.
  • Wearable sensors are applied to fitness equipment and sports.
Check Stock

Honeywell Lynx Touch L5210 Home Automation/Security Alarm Kit with WiFi and Zwave Module

  • Kit Includes LYNX Touch 5210 Control Panel with Transformer and Battery Backup (3) 5815 Slim Door/Window Transmitters, (1) 5834-4 Four-button Wireless Keyfob & (1) 5800PIR-RES Wireless Motion Detector.
  • Integrated Z-Wave Support via L5100-ZWAVE Z-Wave Control Module (Included) for up to three thermostats (HVAC system or battery powered) with 1°F and 0.5°C set points Four door locks - Jammed locks reported to Honeywell Total Connect Remote Services 40 devices (lights, switches and lamp modules) 20 scenes 20 rules (event-based actions) 20 schedules (time-based actions) Sunrise/sunset lighting control Randomized lighting control.
  • Wi-Fi via L5100-WIFI Wi-Fi IP Communication Module (Included) for L5210 IEEE 802.11 B/G/N radio Supports alarm reporting Supports two-way voice LYNX Connect app supports up to four mobile iOS and Android devices. Internet Central Station Communication with L5100-WIFI or ILP5 Module.
  • Control Panel Dimensions (approx) 6.1" H x 8.5" W x 1.71" D (15.5cm H x 21.6cm W x 4.4cm D).
  • **PAID MONTHLY SERVICE REQUIRED FOR HONEYWELL'S TOTAL CONNECT REMOTE SERVICES**.
Check Stock

Honeywell YTL9160AR1000 E-Connect Wireless Programmable/Non-Programmable Line Volt Thermostat Kit

  • Equipment Interface Module (Eim): All Hvac Equipment Is Wired To The Module. Module Receives Communication From The Wireless Devices.
  • Return Air Sensor: Works With The Equipment Interface Module To Maintain Safe Indoor Temperatures If Power Is Lost At The Wireless Thermostat. Maintains 62 F For Heating And 82 F For Cooling.
  • Red Link Wireless Technology: Powered By Red Link Reliability. No Interference With Other Wireless Devices In The Home.
Check Stock

TREBLEET Ethernet Adapter for Nintendo Switch USB 3.0 to 10/100/1000 Network RJ45 LAN Wired Adapter

  • Through this product, the Switch or Switch Lite host can be connected to a more stable wired network without the need of the dock..
  • When the Switch or Switch Lite host is being connected via the Ethernet Adapter, the mounted LED indicators will light up, where you can see the communication status at a glance..
  • According to the communication standard, it is possible for the Ethernet Adapter to connect at a maximum speed of 1000 Mbps..
Check Stock