Top Ethernet Module Board

Geekworm KVM-A4 Kit Compatible with PiKVM HDMI CSI for Raspberry Pi Zero 2W/Zero W Only(Not Include Raspberry Pi)

  • ...sink for heat dissipation of Raspberry Pi Zero 2 W. C296 also compatible with Raspberry Pi Zero W by using thermal pads of different thicknesses..
  • 【What Included】1 x X630-A4 V1.1 Expansion Board with Accessories, 1 x X630-A5 V1.0 Adapter Board with Accessories, 1 x X630 HDMI to CSI-2 Module with Accessories, 1 x Ethernet Cable(1m length), 1 x0.96 inch OLED Module.
  • 【Extra Needed】Raspberry Pi Zero 2W/Zero W, TF Card, HDMI Cable, Power Adapter.
Check Stock

BIGTREETECH Octopus V1.1 Control Board 32bit Silent Board Compatible TMC2209, TMC2240, TMC2208, TMC5160 Stepper Driver, Support DIY Klipper and Raspberry-Pi Online Printing for Voron 3D Printer

  • A combination of duet3 mini5 + and Mini 2 +, for Mini 12864 LCD or 5i Smart Disply screen. For Vorn printer. Max input 28V. The firmware has been burned, only need to Set up your printer and update the firmware through the web interface. Support Wif and Ethernet by replacing the module for the switching. Supports external antenna..
  • Its main control chip and pin allocation are completely consistent with mini5 +. Based on same54p20 (arm cortex M4 @ 120mhz), it is fully compatible with duet3 mini5 +..
  • Upgrades on the power supply and IO protection, Input / output IO full with TVS protection, Automobile fuses( for hot bed input and main power input), all make it safer and more stable..
  • Size: 148.5 x 87mm. XH2.54 connectors, 7x PWM power MOSFET output, On board TF card slot, 2×4 row pin lead out for external SD card module, Type-C USB socket. Based on the good performance of RRF firmware and the on-board 7-axis (7pcs tmc2209 stepper motor driver), the board can be easily configured for a variety of models, such as Vorn series, multi z-axis models, dual x models, etc..
  • Package includes: BIG-DIPPER Motherboard x 1, Gray Cable x 1, External Antenn x 1, Heat Sinks x 7. If you have any questions, you can contact us via Amazon. We will help you to solve the proble....
Check Stock

Ethernet Splitter [Paired Use Only] Network Cable Y Division Adapter LAN Cord 1to2 Port Separator Internet line Segregator 1 to 2 Way Hub Connector for RJ45 Cat5/Cat5e/Cat6/Cat6a/Cat6e/Cat7 [2-Pack]

  • Please NOTE: Equipped with a 1.2m/4ft USB charging cable, it can support charging and networking at the same time. CAN NOT be used without connection..
  • Ethernet Splitter 1 to 2: This RJ45 ethernet splitter is mainly used to solve the connection problem caused by insufficient wiring, Use the USB power supply cable and support two computers to share one Ethernet line simultaneously by means of the physical tapping method. Note: Two Female Port Workable Simultaneously..
  • Transfer Speed: RJ45 Splitter Adapter can divide a network cable into two outputs, the speed of each cable group (1 and 2) can only reach 100Mbps.And the signal transmission of two cable groups will not interfere with each other..
  • Transmission More Stable: The Network Splitter Ethernet Built-in Thick Environmental Protection PCB Circuit Board, RJ45 Eight-core Standard Jack, Gold-plated Pin Core, Integrated Mechanical Welding, More Stable Transmission Signal, it is more convenient to design closed insulation module and safer to use..
  • Wide Compatibility: RJ45 8P8C LAN Ethernet Splitter connector extender is compatible wi....
Check Stock

RPi 3.3V to 5V 26 I/O Bidirectional Voltage-Level Shifter Module for Raspberry Pi, Logic Level Converter

  • Reliable and suitable for a wide range of uses..
  • High conversion efficiency, simple regulating operation..
  • Modbus TCP Ethernet Remote IO Module (8DI+8DO+8AI+RJ45+RS485).
  • The M160T Ethernet Remote I/O Module is an industrial class, isolated designed, high reliability, high stability and high precision data acquisition module,.
  • It provides multi I/O, supports standard Modbus TCP, can be intergraded into SCADA, OPC server, and other automation systems. It is design for working in the harsh industrial application environment, widely used in a variety of industrial automation, monitoring system, automatically measurement and control system..
Check Stock

MikroTik RB260GSP

  • MikroTik FiberBox Outdoor Switch with 5-Ports SFP - Includes 1 S-RJ01 Copper Module (CRS105-5S-FB).
  • The Fiberbox is ideal for locations where distance is restricting the use of regular ethernet cables..
  • The device is weatherproof and comes with a hose clamp and zip ties, ready to be installed on high masts and towers..
  • The package also includes the RJ45 SFP (S-RJ01) copper module already preinstalled in the first port, so you can use ethernet in one of the ports already out of the box..
  • If not needed, remove it to have access to all five SFP ports for using with 1.25 Gbit fiber modules..
Check Stock

Heayzoki Power Supply Module for Raspberry Pi 4B / 3B + Ethernet POE Fan Electronic Component,for Raspberry Pi Ethernet POE Fan Power Supply Module

  • This product provides a convenient and cost-effective way to power equipment..
  • This module allows you to apply DC voltage to specific pairs of Ethernet cables so that devices connected to the network can use it as a power source..
  • This module is ideal for any PoE application with limited space, such as IP cameras, biometrics, readers, network audio, etc..
  • For Raspberry Pi Ethernet POE fan power supply module, supports for Raspberry Pi 4B/3B+, provides clean and reliable power supply..
  • With small size, easy to carry and store, convenient to use and with good performance..
Check Stock

Dedicated Aluminum Heatsink for Raspberry Pi Compute Module 4 (CM4), Notched for Antenna

  • Dedicated Aluminum Heatsink for Raspberry Pi Compute Module 4:Dedicated aluminum heatsink, corrosion / oxidation resisting, better heat dissipation.
  • For CM4 & based board:matching with the CM4 on size and mounting holes, fast heat dissipation.
  • Notched for antenna section:no hindrance to the antenna.
  • Using with base board: for Official Compute Module 4 IO Board or Waveshare Compute Module 4 PoE Board.
  • Note: Only HEATSINK,not include base board.
Check Stock

DIGISHUO Raspberry Pi 4B Model B 2/4/8GB RAM DIY Kit Case Fan SD Card Micro-SD HDMI (8G Module 8 in 1 Kit)

  • 【Raspberry Pi 4 Model B Starter Kit】 Motherboard, New SOC Broadcom BCM2711, quad-core Cortex-A72 (ARM v8) 64-bit at 1.5GHz. Capable of supporting HEVC 4K streams at 60 fps and managing 2 screens in 4K.
  • 【Fastest Raspbery Pi 4 Model B Starter Kit】Dual band 802.11b/g/n/ac WiFi (2.4/5.0 GHz) and Bluetooth 5.0 module. Transfers via 2 USB 3.0 & 2 USB 2.0 ports is faster up to 10 times, 4Gb/s or 500 MB/s. Faster Gigabit Ethernet & Power-over-Ethernet support.
  • 【64GB Class 10 SanDisk Micro SD Card】Use brand new sd card and have no noobs in it you need install system yourself.
  • 【4B Module Cooling Kit】Pi cooling fan with 4 pcs heatsink will make the pi module cooling fast.
  • 【Customized Case】will protect the pi module for well and can also work with 3.5 screen.
  • 【RAM Size Can be Chosen】You can choose 2G or 4G or 8G for your project.
Check Stock

Compute Module DSI Display Adapter, 22PIN to 15PIN Adapter, for Official Compute Module 4 IO Board and Waveshare Compute Module IO Board,Compute Module IO Board Plus

  • Compute Module DSI display adapter, 22PIN to 15PIN, allowing the Compute Module to use 15PIN DSI displays.
  • Suitable for Compute Module IO Board,connecting with Compute Module 4 IO Board.
  • Suitable for connecting with Waveshare Compute Module IO Board Plus.
  • Support all Waveshare DSI LCD, such as 4.3inch DSI LCD,5inch DSI LCD,4.3inch DSI LCD (with Case).
Check Stock

FriendlyElec Nanopi R5S Mini Router OpenWRT with Three Gbps Ethernet Ports 2GB RAM LPDDR4X Based in RK3399 Soc for IOT NAS Smart Home Gateway (with Metal Case) Support U-Boot Linux Ubuntu

  • [WIRELESS MOBILE MINI TRAVEL ROUTER] NanoPi R5S can support external USB wifi adapter. Simultaneous dual band with wireless speed 150Mbps(2.4G)+433Mbps(5G).Convert a public network(wired/wireless) to a private Wi-Fi for secure surfing.
  • [Open Source and Programmable] It can support FriendlyWrt, a custom system based on the OpenWrt distribution. It is open source and ideal for developing IoT applications, NAS applications, smart home gateways, and more..
  • [DUAL GBPS ETHERNET PORTS] The NanoPi R5S has three 2.5Gbps Ethernet ports: one directly extended from the SoC and the other two converted from a PCIe.gets around 934Mbits/second download and upload.
  • LARGER STORAGE & EXTENSIBILITY] 2GB RAM LPDDR4X, up to 128GB MicroSD slot/UHS-I, USB3.0 Host x2: USB Type A.
  • support USB-C, PD x1: Power Input supply, one Native Gigabit Ethernet and Dual Gigabit Ethernet ports (1 WAN and 2 LAN).
  • [ USER MANUAL & PACKAGE CONTENTS]WIKI:NanoPi R5S Portable MINI Router with 1-year limited warranty. Package include: NanoPi R5Sx1 Bear Board.
  • Pls feel free to email us to get the Datasheet or any questions of this module after you purchased it. How to email us? Click "WayPonDEV" and ask a question.
Check Stock

DollaTek 5V ESP8266 Four Channel WiFi Relay IOT Smart Home Cellphone APP Remote Control

  • On board high quality MCU and ESP-01WIFI module Two working mode : Mode 1:cellphone carry on wifi module directly Mode 2:cellphone and wifi module carry on router together Additional function :work as USB module when disconnect ESP-01 module.
  • Transmission distance: (1) the open environment, the mobile phone when carrying on the WIFI module maximum transmission distance of 100 m.
  • (2), when the WiFI module and cell phone carrying on the router at the same time the signal transmission distance depends on router signal.
  • Use the Smartconfig technology to complete the configuration of the account and password of the esp-01 WIFI module on the mobile APP. The configured account and password will be memorized after power off.
  • The board contains 5V,10A/250V AC 10A/30V DC relay, which can continuously absorb 100,000 times, with the protection of diode current and short response time..
  • With mode option and working statue LED indicator.With 4 isolator and strong anti interference ability.Reserved UART debug interface and MCU download port for program.
Check Stock

KEYESTUDIO MEGA Sensor Shield V1 for Arduino MEGA R3 2560 Prototype Board Projects

  • Nice Sensor shield of MEGA Rev3, Easy prototyping and Very convenient especially for 3PIN (G V S) connections. There are tons of ground and VCC headers making really it easy to connect various Arduino modules and sensors with DuPont style cables..
  • This sensor shield board really simplify the circuit and easily connect commonly used sensors.The board is having digital and analog interface, Bluetooth module communication interface, SD Card module communication interface, APC 220 radio frequency module interface, etc..
  • This sensor shield allows ease development and prototyping and makes convenient way to connect many external devices/sensors..
  • This board works well for prototyping or certain permanent applications and a very handy companion to an Mega Rev3 or compatible board..
  • 100% Compatible with the programming software for Arduino. Excellent shield board in good quality and packaged in a nice box! Great for all kinds of scientific experiment research for Arduino.
Check Stock